I made a 3D Printed F1 Car (100 Km/h ?)| Part 1/3
Вставка
- Опубліковано 7 кві 2024
- Hi guys, welcome back to my channel. It's Lee again, Today we gonna make a 3D-printed F1 Car with a brushless motor. This video is quite long so I will divide it into 3 parts. This video is part one, In Part two I will assemble the RX and Tx, and in Part three I will test it outside. So if you feel a little bit interested in this project. Please subscribe to my channel for the next videos coming up. Thanks a lot for watching the video.
3D files for Print : cults3d.com/en/3d-model/gadge...
For Part 2 : • 3D PRINTED RC CAR AT S...
Parts list for anyone who wants to make it.
MC6C mini TX AND RX:amzn.to/3JgCYRF
Brushless motor: amzn.to/3JfZz0y
ESC 40A for Brushless motor: amzn.to/3UhIs4Y
65 mm Wheels :amzn.to/4b0s6ne
Hex Coupler 4mm : Hex Coupler 4mm
S90G servo : amzn.to/3PYoVDW
Shaft Ø4x150 :amzn.to/3Q1FHly
Printer I used:amzn.to/3vC5dqD
M3x45 :amzn.to/3TPZzcA
3S Battery:amzn.to/3JkDFcs
M3x15 and nuts:amzn.to/3vR982T
F604zz bearing:amzn.to/3W0lPmU
-------------------------------------------------------------------------------------------------------------
keyword: Rc car, how to make RC car, DIY rc car, 3d printed RC car, homemade RC car, brushless motor project - Авто та транспорт
Without a differential I suspect it will run into the curb after only a few meters when getting up to speed. And unless you find some perfect surface, suspension might not be optional either to get up to that speed.. So I suspect the next video part will have some upgrades ;)
Thanks for your comment. As I said that I don't have any experience before making this one so It's a little bit frustrating. But Learning is a process, We fail and We learn from it. I hope that some of my projects in the future would be better with you recommendations. I will test it soon so stay tune :))
Nice job Lee! As always :)
Thanks bro :))
Any thoughts about this project ?
Good job guys
I have another question, did your bearings and shaft fit perfectly at the first time? because I ordered 4mm shaft and 4mm bearings and seem they are not fitting properly :/ Or you had to try different producers for the "right" fit?
I used sandpaper to make the shaft smaller so it can fit to the bearing
@@LeeCuriosityah! That makes sense, thanks for the tip
xin file 3d bạn ơi
Hi, does the STL file with the parts will be available so I can do it at home too? or this is just to show how it is done and encourage other people to come up with their own designs?
Actually all the files will be available on my cults :))
@@LeeCuriosity yaaay! Can't wait for it then! I already ordered the other parts and was thinking into use the video to reproduce it but it's easier if it's already available :)
Bro did you sell me this car after it's completed
Actually I'm not base on US So I not sure about that. If you want to build this, I will update 3D files so you can make it yourself.
Bro I can't not have 3d printer 😔
Online cheap manager download
What do you mean....
Giống con của bác nào đăng trên group nhỉ
À mình đó bác ! Nếu được thì giúp mình 1 sub nhé :)) cám ơn bác nhiều