Hello, I bought this remote control. I connected it to the throttle input of the e-bike brushless motor esc. I couldn't start it. When I connected the potentiometer to the throttle port and checked the signal voltage, the e-scooter driver was working at 3.5 volts as the slowest and 1.5 volts as the fastest. When I checked the throttle signal on the receiver port of the flysky remote control, 0.8 volts as the slowest and 1.0 volts as the fastest. Is there a mode or setting to connect and operate this remote control with an e-scooter esc?
Merhaba, bu kumandadan aldım. E-bike fırçasız kotor sürücüsünün gaz girisine taktım. Çalıştıramadım. Ölçüm yaptığımda e-scoter sürücüsü 3,5 volt en yavaş, 1,5 volt en hızlı çalışıyordu. Kumandanın alıcı portundaki gaz sinyalini ölçtügümde ise 0,8volt en yavaş 1,0 volt en hızlı. Bu kumandayı e-scoter sürücüsüne takıp çalıştırabilmek için bir mod yada ayar varmı?
Sir iAm beginner sir my receiver and transmitteer will delever tomorrow i have questions it is compulsory to programe i mean it will come it will work without program or not because i did not have any laptop or computer .. i want to make rc plane .. it will worke without program or not tell me
Hello, I bought this remote control. I connected it to the throttle input of the e-bike brushless motor esc. I couldn't start it. When I connected the potentiometer to the throttle port and checked the signal voltage, the e-scooter driver was working at 3.5 volts as the slowest and 1.5 volts as the fastest. When I checked the throttle signal on the receiver port of the flysky remote control, 0.8 volts as the slowest and 1.0 volts as the fastest. Is there a mode or setting to connect and operate this remote control with an e-scooter esc?
Merhaba, bu kumandadan aldım. E-bike fırçasız kotor sürücüsünün gaz girisine taktım. Çalıştıramadım. Ölçüm yaptığımda e-scoter sürücüsü 3,5 volt en yavaş, 1,5 volt en hızlı çalışıyordu. Kumandanın alıcı portundaki gaz sinyalini ölçtügümde ise 0,8volt en yavaş 1,0 volt en hızlı. Bu kumandayı e-scoter sürücüsüne takıp çalıştırabilmek için bir mod yada ayar varmı?
Sir iAm beginner sir my receiver and transmitteer will delever tomorrow i have questions it is compulsory to programe i mean it will come it will work without program or not because i did not have any laptop or computer .. i want to make rc plane .. it will worke without program or not tell me
Yes You have to program for RC plane!!
@@LetsBeginTech only for rc plane of rc car also
I will cancel it please tell me better reciver and transmitters which we have not program it under 2000 to 3000 please
Flysky i6 Transmitter is good
That transmitter comes with display we can easily program it
It's doesn't required laptop or computer !!
Flysky i6 Transmitter
Currently Rs 4300 to 4500/-
I think !!
Hey i make drone using Flysky Ct6b receiver and the transmitter throttle ruder yaw and eleva working automatically please help
Factory reset flight control or change the transmitter settings
And also check trim keys on transmitter all trim keys value should be 0 ( zero )
@@LetsBeginTech how to factory reset please tell me
Awesome 👍
Sir my throttle stop working i dont know why pls help me sir
Which transmitter are you using ??
@@LetsBeginTech ct6b sir
kabad hai koi mat lena isse achha fs-i4x le lena