Have a look at the Tough Built tool pouches... they have this super cool clip that makes life easier... I'm using like 4 different ones on a daily basis and the best part is that I only need 1 clip on me
I've just restored and/or re-sharpened a bunch of old dikes and linesman's that I've accumulated over the years. A good set of flat files will bring them back to life. I've got a lot of hand tools from the 50s that I still use. People will give me old tools or I'll grab them from estate/garage sales, rehab them and give them to friends or donate them.
I’m in the process of putting together a service kit and would use this as a guideline. I would only add a square #2, terminal block, and beater screwdriver as well as some long reach needle nose pliers. Anything else I would be back to the van for further.
No doubt those bags will last a lifetime and then some. Those tools are top tier too! Great video 👍🏼 My concern with working with a single pouch that size would be extra wear on the body due to the uneven distribution of weight. Do you carry those for several hours at a time? If so do you “feel it more” at the end of the day compared to a double pouch system? I use a light backpack for service work and bring out a tote when needed but I’m thinking of getting Oxy’s again (mine were sadly stolen years ago).
Hello, can you post a video of the Flir voltage detector detecting DC? I have scoured the internet looking for confirmation that it detects DC and I cannot find anything. If it does, I will buy one for sure.
@@rtz549 Over a hundred guys in my apprenticeship, almost no one uses linemans anymore. They're still ubiquitous in most peoples minds but mostly only ol boys using them for anything.
I used to have a folding knife (Fastback) in my pouch, but eventually asked myself, "Why are you using something that you have to flip out and in, when with a standard knife, you just push up and pull down. So, I'll put a Fastback on my pants belt, but a ToughBuilt dual mode knife goes in my pouch.
I was disappointed with the Knipex strippers: an 8-32 machine screw would not go into the (correct) hole to be cut, there are no gauge indicators on the reverse side, and the unlocl logo needs to be on the pliers, not the lock.
Not a belt guy. But when I did run a belt, I’d make sure I had my cobras and needle nose. I’d like to have a multi terminal screwdriver as well as my beater and robbie. Otherwise we have a similar set up as far as belts are concerned.
My Occidental kit is 25+ years old and going strong. I recently picked up a couple of Veto pouches for electrical work and other projects I get into. I like certain things about them and hate some others. I'm actually modifying them to add a leather strap handle to replace the bulky synthetic handles. For straight-up electrical work, the OL electrician's pouch can't be beat.
I’m new to the channel and love the content but the focus on the camera is awful. Not saying I could do better but the back and forth of focus is very annoying. Just giving a respectful criticism . Great content
Here in Argentina insulated tools are for those with mini testi-colas! Real lectricians use clothes hangers, Bobby pins, washers, and pennies, along with our bare hands!
“Everyone in Europe is required to use insulated tools”
As a European controls engineer, that’s a new one I’ve not heard before.
Have a look at the Tough Built tool pouches... they have this super cool clip that makes life easier... I'm using like 4 different ones on a daily basis and the best part is that I only need 1 clip on me
My Klein diagonal pliers. Below the knipex out of the water for sharpness. Everything else knipex is great.
I've just restored and/or re-sharpened a bunch of old dikes and linesman's that I've accumulated over the years. A good set of flat files will bring them back to life. I've got a lot of hand tools from the 50s that I still use. People will give me old tools or I'll grab them from estate/garage sales, rehab them and give them to friends or donate them.
Finally a man of taste and not Klein fan boy
Keep producing great content. Nice video
Thanks. Good info. Thanks for making these vides.
Thanks for the feedback!
Homie wanted to show off his 2000$ tool investment
I’m in the process of putting together a service kit and would use this as a guideline. I would only add a square #2, terminal block, and beater screwdriver as well as some long reach needle nose pliers. Anything else I would be back to the van for further.
Hey bro keep the content up very good advice and tips for the future of the trade👍🏼
No doubt those bags will last a lifetime and then some. Those tools are top tier too! Great video 👍🏼 My concern with working with a single pouch that size would be extra wear on the body due to the uneven distribution of weight. Do you carry those for several hours at a time? If so do you “feel it more” at the end of the day compared to a double pouch system? I use a light backpack for service work and bring out a tote when needed but I’m thinking of getting Oxy’s again (mine were sadly stolen years ago).
Awesome video
need a side bag for fasterners, staples, screws, marrettes, snap ins
Hello, can you post a video of the Flir voltage detector detecting DC? I have scoured the internet looking for confirmation that it detects DC and I cannot find anything. If it does, I will buy one for sure.
No I misspoke on the DC thing it’s a light reading function
Nice tools men. Hopefully I have that soon.
Hey man are sure that ncv tester from FLIR does both AC & DC? If so will you send me the model number. Thanks Enjoy your content
Can someone explain to me why americans only use linemans? Im from Ireland so genuine question
What do you use instead?
@@rtz549 just normal knipex installation pliers
@@rtz549 Over a hundred guys in my apprenticeship, almost no one uses linemans anymore. They're still ubiquitous in most peoples minds but mostly only ol boys using them for anything.
I used to have a folding knife (Fastback) in my pouch, but eventually asked myself, "Why are you using something that you have to flip out and in, when with a standard knife, you just push up and pull down. So, I'll put a Fastback on my pants belt, but a ToughBuilt dual mode knife goes in my pouch.
A terminal screw driver?
I go light weight on everything so I could carry more. Pittsburgh 6 inch level from harbor freight 👍. You gotta feel the difference!
I was disappointed with the Knipex strippers: an 8-32 machine screw would not go into the (correct) hole to be cut, there are no gauge indicators on the reverse side, and the unlocl logo needs to be on the pliers, not the lock.
Not a belt guy. But when I did run a belt, I’d make sure I had my cobras and needle nose. I’d like to have a multi terminal screwdriver as well as my beater and robbie. Otherwise we have a similar set up as far as belts are concerned.
Need some oil on those wire strippers, mine used to have that annoying squeak too.
Auto focus was a bit slow...
Leather only
Only leather
Occidental leather
My Occidental kit is 25+ years old and going strong. I recently picked up a couple of Veto pouches for electrical work and other projects I get into. I like certain things about them and hate some others. I'm actually modifying them to add a leather strap handle to replace the bulky synthetic handles. For straight-up electrical work, the OL electrician's pouch can't be beat.
Back injury on a belt. Too one sided.
Better to use a tray, why use a belt
I’m new to the channel and love the content but the focus on the camera is awful. Not saying I could do better but the back and forth of focus is very annoying. Just giving a respectful criticism . Great content
It should be fixed on the newer videos. Appreciate the feedback and support man!
First
Much love!
Here in Argentina insulated tools are for those with mini testi-colas! Real lectricians use clothes hangers, Bobby pins, washers, and pennies, along with our bare hands!
good luck......
Being an electrician in Argentina is a dying trade.
I wanted to see the pouch, not all your tools. You’ve already talked about your tools in multiple videos.
Looks like you don’t even use your tools bro.