CAN AM SPYDER BRAKE BLEEDING AND CLEARING BRAKE FAILURE CODE

Поділитися
Вставка

КОМЕНТАРІ • 45

  • @HUMPTYNUGGET
    @HUMPTYNUGGET 3 місяці тому

    Thank you so much sir, I was bleeding my brakes for a month... Got thru 10 gallons of Brake fluid and was close to a nervous breakdown but your video showed me that I needed to take the brake calipers off to get all of the air bubbles out..... I can't thank you enough

  • @joseb1700
    @joseb1700 4 роки тому +1

    Man ur the man . U saved me a trip to the dealer n maybe $1000’s I changed the fuel pump n purge solinoid cause I miss diagnosed it .. turned out it was the fromt plug , but because I took the tank out I had to pull the master n lost all my brake fluid so I had to bleed everything like u did n I didn’t know about the vss pump till watched ur vid .. man ur a life saver..!! Now I got it all done but I can’t clear the check engine light n the brake failure warning .. I did exactly what u said but I can’t get the brake pedal to hit the secound switch .. the brake don’t travel that far down cause I got great pressure.. to tell u the truth it never went that far down .. I have 20000 miles on it n it’s a 2015 rss special addition.. green orange n white . But if u can help with the CE light n help me with the brake warning I’d greatly appreciate it .. once again ur the man I FUCKIN LOVE U MAN!!.🤙🏻🤙🏻🤙🏻🤙🏻💯💯💯🤦‍♂️

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      Im so glad i was of help to you . that is the idea to help eachother best regards

    • @joseb1700
      @joseb1700 4 роки тому

      Archi Gomez thnx brother.. god bless

  • @alexborghiphotography
    @alexborghiphotography 3 роки тому +1

    great video, thanks i need to erase the failure code from a client, never did this bike before.

  • @josephmehri9359
    @josephmehri9359 Рік тому +1

    Great job
    Thank you so much
    GOD bless you

    • @indiomechudo1
      @indiomechudo1  11 місяців тому

      my pleasure thank you and many blessings also

  • @joseb1700
    @joseb1700 4 роки тому

    Man ur the best u showed us things we could never find out anywhere .. thnx a lot brother 🙏🙏🙏

    • @narendhbX
      @narendhbX 3 роки тому

      ur problem already fixed ?

    • @joseb1700
      @joseb1700 3 роки тому

      @@narendhbX I fixed it but can’t get the trouble code to go away

    • @narendhbX
      @narendhbX 3 роки тому

      @@joseb1700 already follow the video but still can't remove the breaking failure error :(

    • @joseb1700
      @joseb1700 3 роки тому

      @@narendhbX but I think I’m not doing it right . Will try again thins summer

  • @georgevega7349
    @georgevega7349 4 роки тому +1

    Archi my brake failure light keeps flashing on my Dash from My Can-Am Spyder 2010 I did two step you told me on the video the problem was the parking brake wire got release from the pulley and I put it back but the code has not been erased what am I doing wrong

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      hmmm, start from zero again put cable in the right place, and follow all the steps, i have a vidoe on how to adjust the clearance on the parking brake also,

  • @narendhbX
    @narendhbX 3 роки тому

    i got the same problem about breaking failure, is this video really fix the problem? and can i just fix the bleeding brake without using computer program? because i don't have the program, thank you

    • @indiomechudo1
      @indiomechudo1  3 роки тому

      yes of course , the main thing is to bleed them right , put the front calipers in the right position so the nipple is on the very top so no air bubbles get trapped, and then also bleed the vss (vehicle stability system) that is the most difficult because where it is. and then clearing the code, i did took battery off for few minutes, then plugged back in, turned the ignition on(just pilots) and pressed the brake pedal all the way down until you hear the second "click" release and turn ignition key off for not less than a minute . and when you turn on problem will be gone. if i can help you more please do not hesitate to write will be my pleasure

    • @narendhbX
      @narendhbX 3 роки тому

      @@indiomechudo1 already follow the instruction but still can't remove the breaking failure error :( what should i do?

  • @richardgurbin7059
    @richardgurbin7059 3 роки тому

    Francisco, thanks for this video. I talked to my dealer about spongy brakes and they said it is normal. Is that your opinion?
    Do you recommend a service manual for my CanAm Spyder RT 2015? I see below you offered to send someone a service manual.

    • @indiomechudo1
      @indiomechudo1  3 роки тому

      Hello Richard Good evening, well spongy brakes means there is moisture in the system, the best thing to do is to replace the fluid with new one from a sealed bottle, i already sent the manual to someone abt a year ago. however you can find it on line. mine i had to pay for it and i printed it. it is worth it. another thing i recommend to have is a brake bleeding tool . MIGHTYVAC is a good one, i have a different brand cant remember the brand. it will make your life easier, and you will also be able to use it on you car and other vehicles, ohh here is the one i have look in here www.u-buy.com.tw/en/product/32AUAMU-8milelake-21pcs-handheld-vacuum-pump-set-tester-compatible-for-automotive-with-adapters-brake-bleede it is worth it. most people do not change the brake fluid often just top it when needed, with this tool its so easy i do a complete change every year... . best regards wish you luck . if you have any questions do not hesitate to call me.

    • @richardgurbin7059
      @richardgurbin7059 3 роки тому

      @@indiomechudo1 thanks for the great response Francisco
      Is brake line bleeding normally part of a standard brake job such as a professional mechanic would/should do?

    • @indiomechudo1
      @indiomechudo1  3 роки тому

      @@richardgurbin7059 Hello Richard. well replacing the entire brake fluid is something i do every 6 months myself, but doesnt have to be so often, i do it because once you do it yourself you will realize how easy it is specially if you have the tool i mentioned. (mightyvac) or similar. the brake fluid absorbs so much moisture and makes it spongy. it gives you great satisfaction doing it yourself and will save a lot of money , over there a professional shop is so expensive, here i do it for $30 haha, any ways try doing it yourself , and little by little you will realize how easy to do other things on your bike if you want we can video chat while you do it and ill be there to support you ,we re all bikers and should help each other best regards and blessings

    • @richardgurbin7059
      @richardgurbin7059 3 роки тому

      Very gracious of you to offer Francisco but I try very hard to NOT work on my own equipment any more. Happy to leave it to the mechanics but I like to know what is going on and how things should be handled.@@indiomechudo1

  • @alexborghiphotography
    @alexborghiphotography 3 роки тому

    Hello. I did the steps to get rid of brake failure message but still there. Is there anything else I can do to erase the message? My client is not happy. Thanks

    • @indiomechudo1
      @indiomechudo1  3 роки тому

      did you bleed the VSS ? and reposition the calipers? it is very important. while you bleed the brakes disconnect the battery just to make shure all power is drained

    • @alexborghiphotography
      @alexborghiphotography 3 роки тому

      @@indiomechudo1 i will do it again and make sure of that, thanks a lot

  • @MShrader211
    @MShrader211 4 роки тому

    So how do you bleed the ABS power unit that's so hard to reach? I understand where the nipple is, but how do you get fluid to be expelled from it once you have it cracked-open to flush and bleed it?
    I'm also a little stumped on taking the rear parking brake mechanism loose, that coil spring in there immediately raised red flags when I slipped the thing off it's splines... I'm like, if I pull that spring loose and it uncoils, how will I ever get it coiled back right again? :-(

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      sorry abt late reply i apologyze same as doing the calipers pump the brake pedal. make sure you have a clear hose . so you will not get it all over .. again my apologies

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      you do it just like the brake calipers. pump the brake pedal with the help of someone hold it down and open the nipple, close and repeat many times until there is no air bubbles . (remember to have a clear plastic hose) it is very uncomfortable to get your hands in there. however if you buy a brake tool called MIGHTY VAC will make your life a lot easier. sorry about late reply,,best regards

    • @indiomechudo1
      @indiomechudo1  3 роки тому

      OK the parking brake mechanism doesnt need to be taken apart you can leave it be just make sure the brake is notr set. about the vss block i tried to put the bleeding hose but was impossible. i was able to reach with a lot of trouble and let it run out all over the bike and clean after , seems like it was the only way,

    • @indiomechudo1
      @indiomechudo1  3 роки тому

      what i did for the calipers i used a mightyvac vacuum bleeder. make sure you take the front calipers off and put in a position where the nipple is on top so there will be no air trapped, the rear caliper does not need to be taken off, you can bleed on that position, and the vss block is a pain, you will not be able to put the vacuum pump's hose , so need someone to pump the brakes and let it run all over the bike and clean later, . when iwas doing this i had the battery unpluged because i was doing other things also. but try unhook the battery, then when done bleeding turn ignition on, (not engine) with ignition on, press the brake pedal until you hear the second switch "click" release, turn ignition off, wait 1 minute and then turn bike on and problem should be gone... wish you luck . if i can help you any other way please do no hesitate to call me . whatsapp 503 79225513

  • @nkurunzizaabdul-aziz7211
    @nkurunzizaabdul-aziz7211 4 роки тому +1

    thanks,I need to know more for that brake failure.

    • @indiomechudo1
      @indiomechudo1  4 роки тому +1

      if you follow the directions, it will be solved, takes time but is worth it. if you have any questions please do not hesitate to call me...best regards

    • @nkurunzizaabdul-aziz7211
      @nkurunzizaabdul-aziz7211 4 роки тому

      thanks just sand me your wtsp number

    • @georgevega7349
      @georgevega7349 4 роки тому

      @@indiomechudo1
      Gomez my brake failure lights keeps coming on after the parking brake wire slip off the pulley I put it back as a mechanic and it stills not resetting the brake failer light can you show me a video on that

    • @georgevega7349
      @georgevega7349 4 роки тому

      @@indiomechudo1
      I did the low pressure switch thing that you told me and I push the pedal to the first clip which is the back lights the second one which is the low pressure switch I switch off like you said 30 seconds put it back on and stil. No Working what what am I doing wrong please help

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      @@nkurunzizaabdul-aziz7211 503 79225513 i am in El Salvador

  • @indiomechudo1
    @indiomechudo1  5 років тому

    BY THE WAY , THE BUD (COMP PROGRAM) IS NOT NEEDED. I HOPE THIS HELPS YOU GUYS

  • @fredmore8788
    @fredmore8788 5 років тому

    My brakes feel spongy when I press on them...my guess is that the need bleeding!

    • @franciscocall3377
      @franciscocall3377 5 років тому

      more likely has moisture . bleed all the old brake solution out replace with new.

    • @fredmore8788
      @fredmore8788 5 років тому +1

      @@franciscocall3377 Thanks, I'll proceed to bleed the brakes. Now I also have a flashing on my led that says BRAKE FAILURE...I guess it's also called an error code.

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      @@fredmore8788 I hope it did work for you Fred ! best regards from El Salvador

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      @@fredmore8788 i hope it went ok for you Fred ..Best regards from El Salvador

    • @indiomechudo1
      @indiomechudo1  4 роки тому

      yes more likely has moisture , bleed it and follow instruction very carefuly. you do the slight mistake and will be like saying the wrong thing in front of your wife....... do it slow and dont skip any steps, spyder is very delicate... download the serviice manual if cant send me e mail i will send you the service manual pdf. good luck sorry abt late reply