I'm new to all of this, but I have this transmitter/receiver on order awaiting delivery. Your short video actually just answered a question for me, so thankyou.
To : info031 Press and hold "Cancel" button for a few seconds and it will save the settings. To : iftah111 I6 can bind with old version Flysky receiver. You will need to change "RX setup" to "AFHDS 2A Off. However, old Flysky TX such as FS-T6 cannot bind with the new Flysky "I" series receiver.
since hobbyking has both this transmitter and the extra 6 channel recievers, and also the 10 channel recievers, which both appear to be flysky clone recievers of their new "i" system of transmitters and recievers, i cant help but hope that hobbyking has the 10 channel transmitter soon. that said, this system does not appear to be compatible with the fs-t6 system. if you are looking for the 10 channel transmitter, i have found that nitroplanes/hobbypartz have it listed, but they do not have the recievers yet, or the 6 channel transmitter, but hobbyking has both recievers, the 6 channel transmitter, but not the 10 channel transmitter, granted the hobbyking versions are labled as turnigy but they should be the exact same thing.
When I perform the exact same actions with my TGY-i6 the receiver starts blinking fast again when I reconnect the battery. I don't understand what goes wrong... :(
I am unable to save the switch assignments, does anyone know if and how this can be saved, I have tried everything and all it does is goes back to the default setting, please help if you know how this is done.
Out of all of the videos I watched, this is the only one that worked for me! Thank you!
I'm new to all of this, but I have this transmitter/receiver on order awaiting delivery. Your short video actually just answered a question for me, so thankyou.
you're welcome
Thank you so much!!! Get the bind plug off first guys!!!
Спасибо парень, ты решил мою проблему!
To : info031
Press and hold "Cancel" button for a few seconds and it will save the settings.
To : iftah111
I6 can bind with old version Flysky receiver. You will need to change "RX setup" to "AFHDS 2A Off. However, old Flysky TX such as FS-T6 cannot bind with the new Flysky "I" series receiver.
Whats the differenz between the turnigy and the flysky transmitter
what if you can't find your bind plug?
Can i use a Spectrum or a Fuatba bind plug???
since hobbyking has both this transmitter and the extra 6 channel recievers, and also the 10 channel recievers, which both appear to be flysky clone recievers of their new "i" system of transmitters and recievers, i cant help but hope that hobbyking has the 10 channel transmitter soon. that said, this system does not appear to be compatible with the fs-t6 system. if you are looking for the 10 channel transmitter, i have found that nitroplanes/hobbypartz have it listed, but they do not have the recievers yet, or the 6 channel transmitter, but hobbyking has both recievers, the 6 channel transmitter, but not the 10 channel transmitter, granted the hobbyking versions are labled as turnigy but they should be the exact same thing.
Can you confirm the maximum voltage setting of the voltage alarm setting on the transmitter? Thanks!
Settings>RX Settings>RX Battery
how do you bind this fs-ia6 to the flysky fs-t6 transmitter?
i cant just bind directly from board to power supply/ drone itself?
can you bind the orange or lemon RX with with it
Can it bind with the flysky fs-t6 ?
what is that battery you are using to connect to the reciever
+Sriharsha K Battery pack from my Graupner MX-12 :) You can also use the any ESC with no motor connected.
But what about the TX bind button?
When I perform the exact same actions with my TGY-i6 the receiver starts blinking fast again when I reconnect the battery. I don't understand what goes wrong... :(
after that what wires go where is it by colour old and confused please help
looks nice but it does not work on my fly sky i6
next time say whats going on
I am unable to save the switch assignments, does anyone know if and how this can be saved, I have tried everything and all it does is goes back to the default setting, please help if you know how this is done.
Long press the cancel button.
why do you need to bind the receiver?
cant see the power /battery connection voted down