Thanks for the info on the tiny pro. I just got one the ELRS new version and there are manuals for the receiver and goggles but nothing on the quad copter itself none on the website . Is there a forum where info can be found from other users? it also came with a caddx memory board that I don't know what to do with. Thanks for putting out your videos.
I am hoping that someone can help me out I have the tiny go drone and I have a memory card but I don't know how to make the memory card work inside the tiny go can someone help me out thank you
I'll be honest, it's not that easy, BUT you have the 3 flight modes. Therefore you can start in Angle mode(which is more stable) and then move to Horizon mode, then finally Acro mode. Angle mode is very forgiving and makes the control easy to understand. Thanks for checking in...I love Germany 🇩🇪. Was in Frankfurt a few years ago.
NEW CHANNEL-We've Moved...Find us HERE: ua-cam.com/channels/ricxGlGjZufJa_aIdTvxMQ.html Check out the Full Playlist of the GEPRC TinyGO FPV: GEPRC TinyGo Unboxing: ua-cam.com/video/hCDZk3ksTV8/v-deo.html GEPRC FULL Specs Breakdown: ua-cam.com/video/HthUz_JkKLI/v-deo.html GEPRC TinyGO Setup & 1st Flight Pt.1: ua-cam.com/video/SgecIRGRB7k/v-deo.html GEPRC TinyGO 1st Flight Pt.2: ua-cam.com/video/Q9qMJZ36ceM/v-deo.html
i just got this drone, but the throttle aint working. i have a video signal the controller is connected. But when i throttle up nothing happens. Only button that is working is when i put it in the beeping mode. its not really a turn on and fly kit. Its my first drone and i cant even fly the thing.
I got both plastic part to hold the battery wich are broken, just tried to glue it... Still think that it will not solve the problem. I don't know if i can have any other solution to hold the batteries in case this doesn't work... Just entered FPV since less than 48h... Hope to have help from the community
Hi so there are a few things first my video signal is EXTREMELY weak I can't fly it with the goggle on. How do I fix this I just bought this today and it doesn't work? also what channel should the drone be set to . Thanks
The video transmitter power can be changed up to 200mw, depending on how far you want to fly. You can change the VTX power with just your goggles, drone, and transmitter. They all have to be on and powered. To enter the menu, the throttle has to be half up and yaw stick full left. At the same time, the pitch sick(right gimbal) must be full up. Once you're in the menu, go to "Features" then "VTX" then "Power". You can change the power output there. Don't forget to hit/choose "Set" and "Confirm" once you've made your selection. As far as Channel, you can use whatever Channel you want. There is no right or wrong Channel, as long as you're not interfering with another person's channel. Just make sure the channel in your VTX matches the channel in your goggles.
So my friend bought it, went flying. After 2 batteries he put in the sd card but noe it won't bind. It looks like it binds but then it doesn't react to the controller, do you have any idea how to fix this problem?
I really have not heard about this…The SD card should not have any influence on the Radio or receiver. Maybe try to re-bind the radio. Sorry I could not help.
I have one more question with your pardon, how can I access the camera menu using the 5d joystick that came out of the package, I plugged it into the device, but no menu is displayed on the screen.
I have not used that function as of yet, So I can't give a definitive answer, But I think it's straight forward. Did you connect the controller before powering on the drone? Here a good video from Albert Kim talking about the Loris Settings: ua-cam.com/video/56af-WJTSFA/v-deo.html
You do not need both cards to record. One in the drone or goggles is good enough to record...In fact, when I'm practicing I'll remove the SD card in the drone.
What do you mean? I record in 4K 60FPS and transfer the files to my computer using the micro SD card. 4K is the highest resolution, but I think you can also record in 2.7K or 1080p if needed.
You can upgrade the antenas on the goggles to a circular polarized type and a Patch antenna...Something similar to these: Patch Antenna: amzn.to/2U8iG6C Polarized & Patch Antenna: amzn.to/3dmPwXY
Thanks for the info on the tiny pro. I just got one the ELRS new version and there are manuals for the receiver and goggles but nothing
on the quad copter itself none on the website . Is there a forum where info can be found from other users? it also came with a caddx memory board that I don't know what to do with. Thanks for putting out your videos.
Now that is what I call a tease 😅
Haha..It sure is.
I am hoping that someone can help me out I have the tiny go drone and I have a memory card but I don't know how to make the memory card work inside the tiny go can someone help me out thank you
Great video 👌
Thanks
Very informative set up video. Thank you so much!
Thanks, I appreciate that…It was fun making these videos.
How hard is it to fly if you try it for the very first time? Regards from Germany 🤙
I'll be honest, it's not that easy, BUT you have the 3 flight modes. Therefore you can start in Angle mode(which is more stable) and then move to Horizon mode, then finally Acro mode. Angle mode is very forgiving and makes the control easy to understand.
Thanks for checking in...I love Germany 🇩🇪. Was in Frankfurt a few years ago.
Is the angle mode with the toggle all the way forward or towards you?
NEW CHANNEL-We've Moved...Find us HERE:
ua-cam.com/channels/ricxGlGjZufJa_aIdTvxMQ.html
Check out the Full Playlist of the GEPRC TinyGO FPV:
GEPRC TinyGo Unboxing: ua-cam.com/video/hCDZk3ksTV8/v-deo.html
GEPRC FULL Specs Breakdown: ua-cam.com/video/HthUz_JkKLI/v-deo.html
GEPRC TinyGO Setup & 1st Flight Pt.1: ua-cam.com/video/SgecIRGRB7k/v-deo.html
GEPRC TinyGO 1st Flight Pt.2: ua-cam.com/video/Q9qMJZ36ceM/v-deo.html
i just got this drone, but the throttle aint working. i have a video signal the controller is connected. But when i throttle up nothing happens. Only button that is working is when i put it in the beeping mode. its not really a turn on and fly kit. Its my first drone and i cant even fly the thing.
The throttle needs to be all the way down(Idle) before you can Arm the drone.
I got both plastic part to hold the battery wich are broken, just tried to glue it... Still think that it will not solve the problem. I don't know if i can have any other solution to hold the batteries in case this doesn't work... Just entered FPV since less than 48h... Hope to have help from the community
Hi so there are a few things first my video signal is EXTREMELY weak I can't fly it with the goggle on. How do I fix this I just bought this today and it doesn't work? also what channel should the drone be set to . Thanks
The video transmitter power can be changed up to 200mw, depending on how far you want to fly.
You can change the VTX power with just your goggles, drone, and transmitter. They all have to be on and powered. To enter the menu, the throttle has to be half up and yaw stick full left. At the same time, the pitch sick(right gimbal) must be full up. Once you're in the menu, go to "Features" then "VTX" then "Power". You can change the power output there. Don't forget to hit/choose "Set" and "Confirm" once you've made your selection.
As far as Channel, you can use whatever Channel you want. There is no right or wrong Channel, as long as you're not interfering with another person's channel. Just make sure the channel in your VTX matches the channel in your goggles.
So my friend bought it, went flying. After 2 batteries he put in the sd card but noe it won't bind. It looks like it binds but then it doesn't react to the controller, do you have any idea how to fix this problem?
I really have not heard about this…The SD card should not have any influence on the Radio or receiver. Maybe try to re-bind the radio. Sorry I could not help.
Cant get mine to work your video didn't explain the Binding process.
I have one more question with your pardon, how can I access the camera menu using the 5d joystick that came out of the package, I plugged it into the device, but no menu is displayed on the screen.
I have not used that function as of yet, So I can't give a definitive answer, But I think it's straight forward. Did you connect the controller before powering on the drone? Here a good video from Albert Kim talking about the Loris Settings:
ua-cam.com/video/56af-WJTSFA/v-deo.html
@@BakeryPilot Thank you very much for your interest and support.☺️
Hey great video!
Do you know the name of the two red and black wires to connect the batteries to the quad are?
JST-PH 2.0 Connector..Got mine from Amazon Here:
amzn.to/2UNS633
@@BakeryPilot thank you! My battery fried the connector when connecting...
Understood...it can happen.
Hello there,
your reviews are very good, i have a question
How can I reach the setting tool at 10:51?
Thank you…To get to the menu, Left(throttle) stick half way up and full Left. At the same time, Right stick fully Up. I show it in the next video:
ua-cam.com/video/Q9qMJZ36ceM/v-deo.html
Yeah, but you only need the SD card if you plan on recording flight footage.
do you need both SD cards in order to record?
You do not need both cards to record. One in the drone or goggles is good enough to record...In fact, when I'm practicing I'll remove the SD card in the drone.
Which settings would you recommend I use for the best image transfer?
What do you mean? I record in 4K 60FPS and transfer the files to my computer using the micro SD card. 4K is the highest resolution, but I think you can also record in 2.7K or 1080p if needed.
actually what I mean is the snapshot from the glasses, and the signal. how can i provide a stronger transmission
You can upgrade the antenas on the goggles to a circular polarized type and a Patch antenna...Something similar to these:
Patch Antenna: amzn.to/2U8iG6C
Polarized & Patch Antenna: amzn.to/3dmPwXY
Can the non 4k drone record?
Yes it can
Anyone having issues recording to the drone micro sd slot? Only able to get video from the goggles and its poor quality.
Just ordered one!
Awesome, you're going to like it.
¿Where did you bought it, when it arrived?
I bought mine directly from GepRC... I've also left links down below for Amazon.
@@BakeryPilot thanks, I'm looking for one, but here in México there's not much availability
I cant bind mine
now i want one
Haha... It's just like a Mavic Air without stability.
@@BakeryPilot is it still drifting from left to right even if its done with gyro calibration?