Use the very attractive new ATTINY chips for your projects
Вставка
- Опубліковано 13 тра 2024
- Frequent viewers know that I like GreatScott's channel because he greatly develops people’s interest in electronics. When he showed a trigger board to keep a USB power bank on for small projects, I thought: Great idea, but this could be done better! And it is a perfect excuse to tinker with the new ATtiny chips. He used a 50-year-old 555 timer IC, and I want to use the same size and a similar price modern chip because this chip lets us put some “artificial” intelligence into the project. During this journey, we will learn about a very useful chip family and discover some unknown behavior of power banks as well as a new fake sold on AliExpress.
The job offer is no longer valid :-(
My second channel: / hb9blawireless
Links:
Arduino Nano Clone: s.click.aliexpress.com/e/_Dkh... or amzn.to/3wriMsR
USB-Serial converter (3.3 and 5V): s.click.aliexpress.com/e/_DkB... or amzn.to/48zPsOB
PCBs for experiments: s.click.aliexpress.com/e/_DBI... or amzn.to/3ONsSea
DIP SOP PCBs: s.click.aliexpress.com/e/_DcR... or amzn.to/3OKuvJw
ATTINY412 FAKES: Do not order!: s.click.aliexpress.com/e/_Dmg...
Real ATTINY412: bit.ly/4bEFLkm
ATTINY412 datasheet: www.microchip.com/en-us/produ...
MegaTinyCore: github.com/SpenceKonde/megaTi...
jtag2updi: github.com/ElTangas/jtag2updi
GreatScotts Video: • Your Powerbank has 1 B...
Patreon supporter companies:
passiv-energie.gmbh/
www.welectron.com/
The links above are usually affiliate links that support the channel (at no additional cost to you).
Supporting Material and Blog Page: www.sensorsiot.org
GitHub: www.github.com/sensorsiot
My Patreon Page: / andreasspiess
Discord: / discord
If you want to support the channel, please use the links below to start your shopping. No additional charges for you, but I get a commission on your purchases to buy new stuff for the channel
My Amazon.com shop: www.amazon.com/shop/andreassp...
For Banggood bit.ly/2jAQEf4
For AliExpress: For AliExpress: bit.ly/3MtXUY8 (just go on from here to your product)
For Amazon US: www.amazon.com/shop/andreassp...
For Amazon.de: amzn.to/2r0ZCYI
For Amazon UK: amzn.to/2mxBaJf
For ebay.com: ebay.to/2DuYXBp
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to email me. This communication channel is reserved for my primary job
As an Amazon Associate, I earn from qualifying purchases
#no#midroll#ads - Наука та технологія
Love to see other approaches to one problem. Pretty cool ATTiny as well. Might use it in the future as well ;-)
Bitluni has some in depth reviews about the reasons why the attiny fits his purpose so well
Nice to see you commenting like that! You see, you are an inspiration even for old men ;-)
Hi guys. I've been using USB power banks to power my long range RF/Nano projects for years and use transistor circuitry to defeat auto-shutdown. Using RF I can not only send/receive data and reboot but also shutdown the board entirely. An Eagle pic of my pc board design:
www.4gto.com/Nano_powerbank_pcb.jpg
IMHO the CH32V003 and its siblings (CH32V203 in particular) are far more promising for the price point and size. It has far more capable peripherals, is less expensive, and also has a far more capable CPU if/when you need it!
@@MUSTARDTIGERFPV I was thinking exactly the same. Perfect for simple sensing and controlling tasks
Do you know any good free and scalable framework for controllers and sensors? I'm playing with creating my own but want to be sure I'm not reinventing the wheel
Great Scott, a guy with a Swiss accent, a vintage high tech NE555... and now ATtiny's... what an awesome Sunday morning entertainment.
Glad you enjoyed it!
😊😊😊😅😢😊😢😢@@AndreasSpiess
I think he is German, not Swiss.
@@ikemkrueger Indeed, Great Scott is from Germany. Andreas is the guy with the Swiss accent, he's definitely from Switzerland.
Who cares about his accent, he has great IDEARS 0:15. 😆
We chose to do the things we do, not because they are easy, but because we thought they were going to be easy.
Precisely. Like making children ;-)
@NomenNescio99 Even Linux exists for that very reason
So true... And I feel very identified with this, going down the Klipper way instead of sticking with Marlin for my 3D printer 😂
@AndreasSpiess making the children is the easy part. Keeping them alive and growing them up not to be assholes, is the hard part. 🤣
@@jjones503 From a male perspective!
I fiddled with AVRs in the past and wanted to store state information on a power failure. I used a diode feeding a largish cap on the power pins and monitored the incoming power before the diode for a power failure using a second diode connected to a sense pin with an interrupt set up to trigger when it went low. When the interrupt was triggered, I immediately stored the state information to the EEPROM, and the energy in the cap was enough to get that done before the AVR ran out of power. This saved needing to constantly write data to the EEPROM in case the power died, because there was quite a lot of data to store and the 100,000 cycles would be used up within a year if I kept writing that data to the EEPROM every second. Wear levelling wasn't an option.
what i was thinking, great
A good idea to avoid wearing! Here, these additional parts were not relly needed as I do not use the "calibration function" a lot.
I like videos that shows how to use dedicated chips instead of using always an esp or arduino. Small projects will be cheaper and more power efficient. 👍
I agree
A dedicated chip is not necessarily more power efficient. If you put the microcontroller to sleep it consumes very little power
@@elguido Yes, but most ready-made ESP/Arduino boards have things like power LEDs, UART-USB-bridges or linear voltage regulators with pool quiescent current, which aren't really bothered by the MCUs sleep mode.
“If something looks simple and straightforward, it often is not.” I found this out the hard way, trying to complete a project that I thought would be finished in three months, has taken almost eight years 😂
That is a long time for a project. I admire your stamina!
@@AndreasSpiess I think the payoff will be worth it. SecureFarm, security in the back yard for the small homesteader. Whoa did I have a lot of roadblocks. Your videos helped :-)
If only more managers understood that lol. "Looks simple... it'll take me between 4 hours and 4 weeks."
s/w only I have previously said the team could have the functionality done in a month (elapsed). To have it production quality would take a bit longer.
These days I find doubling the estimate, adding the fudge factor and doubling again is still an underestimate, but then my team these days is very different standard. (Did anyone see the video add in recent months about "you too could be an embedded software developer in a few weeks [repeat embedded software developer about a hundred times]" - that's the quality of people we seem to see these days).
It’s my job to design rather sophisticated industrial controls. But, even with the best tools, good firmware and reasonable budgets, I still try to sneak in the occasional 555 and/or 2N3904/3906 (b/c I have an appreciation for the classics) and one 90 degree trace - just to drive the “electrons are going to slide off around the corner” (even at DC) crowd crazy. This probably says terrible things about me as a person, but at least I can inject a bit of harmless fun into my work. Haha Long live the (timer) King - the 555.
I agree. An electronics part that survives such a long time must be good!
You Rebel scum!
(Only joking ofcoz, Always sneak in the classics, keeping it analog "Because" we are Rebel Scum!)
😊@@AndreasSpiess
Love it, classically trained tech trolling. Been in tech for decades, in security now, I often toss out TCL and Perl scripts to mess with the younguns, they have no idea how to deal with anything but Python.
@@c1ph3rpunkto be extra naughty you could use pascal or forth or cobol, lol
latest cobol spec is from 2023, and there is a fully gnu cobol compiler! >;P
Some interesting things about the Attiny 1-series: 1. The internal oscillator is much more accurate than on the older AVR chips. 2. They support a wide voltage input range especially at lower clock rate. 3. The ADC is actually quite good (this is more subjective).
Thank you for the additional info. Indeed, I run my chip on the lowest clock speed (internal). But of course, precise timing is not a big issue in this project.
A good ADC is handy on low pin count devices like this, because you can do things like use resistor ladders to hook up a bunch of buttons or switches (DIP or otherwise) to a single pin, saving you I/O for other functions.
The thing I really like about these (relatively) new devices is that FINALLY we have low pin-count devices with serial peripherals. Just what you need to convert a simple sensor or actuator into a serial bus device using I2C, CAN or LIN etc. (although the latter two will also require a bus driver chip). I have waited twenty years for this day, and suggested it to Microchip on numerous occasions! Two pins for power, one for reset/programming, two for the serial bus, you still have three to connect your sensor/actuator which is plenty in most cases. The Chinese chips are presumably copies at the mask level or reverse engineered. Does not seem worth the risk when they are readily available at reasonable prices from reputable western stockists (one of which has actually popped up as an ad over this video!)
These devices are already several years old. The one used in the video is at least 4 years old already.
@@backgammonbacon Hence '(relatively)'.
Attiny's have had USI (I2C/SPI/UART) for ages, for example, attiny85 that was introduced in 2005.
@@osmanpasha96 On the eight pin ones?
@@john_hind yep
A friend of mine approached me with an interesting ATtiny challenge. He had to develop a certain small&smart device for a musician; the ATtiny85 was the perfect companion. The challenge was to make the final fine-tuning on the field while rehearsing: how to quickly reprogram the ATtiny without dissembling or swapping the device? "Use a DIP switch or jumpers" was my spontaneous answer. I'm glad he succeeded with it with such small and spontaneous advice.
Indeed, such switches were a good idea for the ATTINY85...
You need to say AI device, not smart device. "smart" is so 2010....
@cdjxwubcyex;
And AI is so overused for many cases of natural stupidity 😅
Adding impedance to the pins AFTER the bifurcation to the ISP connection usually solves most of the issues with ISP interference.
Attiny Pin -----> ISP Header ----> Resistor ----> Peripheral. This ensures that the ISP has a lower impedance towards the ATTiny Pin. The exact value of the resistor depends on the overall circuit impedance, but I have experienced seeing anything from 10R to 22R working well for IC to IC communication.
@@cdjxwubcyex X'D
Could you keep the uC running off a capacitor long enough to trigger a pulse, so that you don't need a battery?
Nice idea!
Because the power consumption is to little - one diode, one electrolytic capacitor and small change in code: if ADC doesn't see 5V - subtract a 'some safe amount of seconds' and save this number into EEPROM and rise the flag (to avoid any trashy values when the capacitor voltage goes down the safe voltage region) On start you can type this value into Serial for debug purpose.
CC: @AndreasSpiess
A good idea!
I was thinking this pretty much as soon, if not slightly before he introduced the battery idea, lol
and I don't even mess with any microcontroller stuff, lol
I'd look for a proper low power controller, STM32U-series or TI MSP430, that will run circles around the mA numbers from the video, and run at low input voltage. Pair it with a mF supercap and you should have plenty of run time for re-triggering and storing timing data
Thank you for the update on the new ATtiny
My pleasure!
It would be super cool if Great Scott now took your design and improved it even further.
The most epic type of battle ever
And a learning experience for is viewers😊
If they find defects or holes in each other's designs, would that make the collaboration...
Swiss Cheese?
He already commented that he might use the chip in the future. Bu probably for a different project...
Please, more ATtiny stuff.
Excellent show.
Thank you!
Both you guys have taught me so much. I love being able to take the basics of a concept, develop it into a working project and then move it onto the next level to really cement my understanding.
I always try to stand on the "shoulders of giants" ;-)
Nice introduction to the new ATtinys - however, regarding your criticism of the old SPI-programming interface: I never had a problem using all 5 pins (excluding reset, vcc and gnd) on the 8-pin chips with in-circuit programming. Yes, you are double-using those pins, but only during programming. And then it normally doesn't matter if you send invalid codes to an also attached SPI-slave devide, blink some LEDs or have push-buttons attached (as long as you don't press these buttons during programming).
I agree that it does not always crete issues if you pay attention what you connect to the pins. Still, I like the new method better.
Yeah, that's what I found too, just take a little care to avoid a large load to the programming pins, but like he said, the new way is a lot nicer. I found myself using the 20 pin ATTINYs when an 8 pin would do, just because I knew I wouldn't run out of pins in any case.
I had no idea atmel had an improved attiny that was easier to program. No having to remove it from the test circuit 100 times. Imagine that! Thank you Mr speiss. Your channel is a huge help to the pursuit of getting things to work!!
You are welcome! Indeed, removing the chip was quite anoying for me, too
Your channel and the Great Scott one are my two favourites !! Thanks a lot for sharing your knowledge
You are welcome!
After playing around with Arduinos dor a few years, I came across this series of newer microcontrollers about 7 months ago. I use them now for all smaller projects. The required hardware for programming is so simple and cheap, and still no bootloader required. Quite accurate timers without external oscillator. I love it!
Thank you for sharing your experience!
Great video today, I also watched Great Scott's video. BTW the debug switching was a trick I learned many years ago when I first learned to program in C, thanks for sharing! Much love, happiness, and success to you!
Indeed, the debugging trick is old. Still, beginners might not know it and it is important for such small chips.
@@AndreasSpiessMy intent was not to disparage the technique at all, it merely surprised me to hear anyone talking about it. Without tricks like that, I would still be an assembler programmer. Love your program and have been watching and enjoying my front-row seat for a long time. Thanks again Andreas for all you do!
Your interface can be simplified:
- enter characterization mode if nothing is connected to the output otherwise enter supply mode
- in characterization mode, while the power supply is active keep an led on (it will switch off when power is cut indicating to the user that it is done and they can plug in their load)
- in supply mode, turn on a different led (or different color, to indicate a different mode)
This would completely free up the user to do user things in parallel =)
Detecting if output is connected requires a lot more effort, so it complicates the design
How do you plan to detect if something is connected to the output? The usb has no detect pin so one of the only ways you can do it is to measure current which itself adds complexity, requiring either a low side shunt resistor or a Hall effect current sensor.
@conorstewart2214 @osmanpasha96 Yes, a bit more complexity would be required... I was thinking on measuring current, should be the simplest approach.
Good ideas. Maybe you try it to prove if they work?
Doing the chip 'supply shortage' these were the only cheap chips I could find, so I had to figure out how to use them, there was not a lot of youtubers using them yet. Great to see even the favorite channel is using them.
Indeed, they were available for quite some time…
Thank you so much, Andreas, for yet another inspiring video. Your channel is motivating me to live a healthier life (cut back calories, improve my condition, etc..) because I keep adding your projects to my "I MUST try this before I die" list and I'm only ever going to get through that list if I don't add years to my life. Thank you so much for motivating me.
We all live longer these days. And you will get a lot of time if you will be retired ;-)
This is exactly how my projects go. As an example Ive been trying to make a pi based nightvision camera using the Argon POD case. The goal was simple - have a no IR camer output to the PODs SPI display. After quite a bit of experimentation I sacked off the spi display for a small hdmi connected display which does exactly what I want - full screen camera - with a lot less coding than the spi display. In summary never be frighten of changing what you're doing especially of you can achieve the same goal with less hassle.
Nice story with the same learnings!
Hi Andreas - great to see you getting into the ATTINYs - brilliant little chips, and Spence Kondes Core works like a charm.
One thinng about the programmer: you don't need to sacrifice an NANO: UPDI is possible with any cheap USB-2-Serial based adapter. The ones with the CH340 chips work quilte nicely and are normally a dollar a pop. One resistor between TX and RX and you're game; I did a video on that toppic some time ago.
Keep up the good work!
Indeed, you can also use an usb to serial adapter. I tried it after other commenters wrote it.
My project queue is so big already. Your channel keeps adding to the list. Thanks for another great video!
Here it is different: After a video, I can delete one item on my list ;-)
Seducingly pleasant presentation format. Your structuring of the video is highly enjoyable. Found myself almost not skipping back and forth because you laid it out in a sensible sequence which kept my interest up. The layout progressed nicely. Good job!
Also: Great Scott is awesome.
Thank you for your kind words!
There are power banks with a low power mode that can be activated by double-clicking on some Anker products. This is required, for example, to charge True Wireless Earbuds or smart watches. Edit: It's called Trickel Charge Mode at Anker. It says that it deactivates after 2 hours of non-use. It is questionable how exactly they can measure whether this is used or not.
I accidentally discovered this, one of the charge indicator LEDs switched from blue to green when I pressed the button twice. Strangely this was not documented in the manual.
Good info. Thank you!
Lots of goodies in this video! Those new ATTiny chips looks promising, I've heard about them but this is the first video I see them in use. Thanks for sharing!
My pleasure!
My pleasure!
I have spent a lot of time using the ATTiny85 and the micronucleus bootloader to get an additional pin. They don't have full hardware uart support like these newer ones do so these look like a nice alternative as an upgrade.
Definitively, the one pin programming as well as the UART are extremely useful.
Another direction to look into! I am 76YO and split my time too many ways. 🤣Maybe limit myself to 5 or 6 projects at a time? When I am 80YO, it may be just not drooling🤔. Another great video Andreas.
Having the choice to say "no" is very relaxing, I think. I also have to pay attention to this word...
i'm in my 40s, already significant mental cycles dedicated to _drooling-prevention-subroutine._
When i'm in 80s i hope to drool at 2x existing capabilities 🤤🌊 !!
I just reached 76 yesterday. My first step into the "micro-controller-world" was designing the hardware around an Intel 8080 and the programming it using a teletype, byte for byte. Not even a floppy disc -> everything had to be stored onto a paper tape until the prom could be programmed. Still, the end product moved paper or film to and fro, accurately for a type setting machine. I am still using micro-controllers - or maybe I should say, using them again - for laser based projects. No paper tape though.
@@alistairgill5538 People might be interested in seeing videos (or just twitter updates w' photos) on your projects. I'm always amazed at the subcultures & passion that exists out there for specific sub-fields of interest. Doesn't have to be well filmed, always remember: The people interested in this subject, are likely people just like you - who film/narrate things JUST LIKE YOU TOO! they don't mind 😄
@@roidroid It has occurred to me to do something like that. I have given quite a few talks locally - 30 to 40 minutes - on various topics. Thanks for the suggestion. I'll think about it.
I love the ATTiny. Using them for many years. Always having a lot of them in stock for new projects. Did not know about the new ones!
I am sure you will like them, too!
Great way to start the week! I love these kinds of videos, thank you for sharing
My pleasure!
Great video again. I love the "new" attiny series 0 and 1. 👍
In 2022, I made a small dev board with ATtiny1604 and ATtiny1614. They are superior in all aspects compared to the older Attiny.
Thank you for sharing your experience!
Thank you for this video. I have been a fan of Atmel chips for many years. These new chips will be very useful.
My solution to the power bank problem was to design my own power banks with an on-off switch.
Then made power banks for my battery powered camping fridge (my BougeRV fridge has been in constant use for almost two years now) .
I build the packs in 400W/Hr increments. I get 1 to 2 days fridge operating time out of each pack.
Your packs are probably a bit bigger than mine ;-) Mine would not drive a fridge for a long time.
Can you recommend where or how to get low power BMS system for these packs? Last one I bought was off Amazon and my pack now has 2 series banks of cells that are below safe voltage (less than 1 volt) while the third bank is at 4.2 volts... the battery went dead and then I could not get it to charge... Now I know why. But I tested all the cells by charging them all and leaving them for a month, all within 0.1 volts of full which is what I measured when I took them off the charger, my meter sucks so close enough. I have also had other issues like a low max current (can't do 5 amps even with 18 cells in parallel)... even these cells can easily do 1 amp easily so that sucks.
I considered using an AVR to control them but I need to find a way to kill power to the AVR when the pack goes dead so it doesn't keep draining the cells. Or do you just use a hard switch to kill all power and then make sure to shut them off when dead?
This was very useful! Thanks, Andreas. And thanks for the heads-up on the new chips! 👍
My pleasure!
Thanks Andreas, this was another great video! You’ re a star, keep being awesome!
My pleasure!
Excellent! I've used PICs since they were first made, and this single pin programming looks to be a game changer.
But these are no PICs. They are AVRs.
Great project!
Interesting new chip, that can give new possibilities for projects.
Thanks for sharing your experience with All of us 👍😃
My pleasure!
A capacitor to delay a brown-out and a 5V input that would have down-edge triggered interrupt might save you from saving every value into EEPROM -> just write one value during IRQ just before the chip dies...
Was about to make this same comment
I agree. But it would be one part more ;-)
Great Video Andreas. I do something similar in my gaming LED controllers over on terraintronics. I use the Wemos D1 Mini as a brain, and drive a 47Ohm to GND using a mosfet as you've done. The little innovation that I love is the "count and save" you have to characterize the battery. A simple idea, but brilliant. I currently have A0 unpopulated. I think I'll update the code to check A0 on startup, and IF it's 3V3, assume it's in characterization mode.
I am not sure if the 3.3V method works. I only have to press the button if I know I use a different power bank.
"Open source and UA-cam is the right place to foster innovation" are exactly my words!
Great video and hopefully you will start to see more content from our community - AeroRust.
I wish I had a bit more knowledge in electronics but I'm very comfortable with embedded software at this point and want to do exactly this - make open-source and learning materials for aerospace development.
I just googled. The only time I had to do with your industry is when I had a project at Emirates Airways...
Thanks Andreas.
What I do with SMD chips is use one of the SMD sockets then solder the programmed chip to my board. Some chips will work with the 6 pin connector on the board but you have to be careful what pins you use. I've fixed circuits with mosfets controlling devices by using a resistor on the gate from the programmer, 10k to 100k usually work.
Thank you for your tips! I also used SMD socket for programming. However, I found it easier to program and test the chips in the real environment.
These new ATtinys look awesome: thanks for the update good sir 👍😀
Glad you like them!
This was such an amazing demonstration. Thank you for an elaborate video. Because of this I have learned a completely new thing tonight.
Wonderful!
Why measure and store instead of just reacting? Decouple the ATtiny a big so it keeps running a tiny bit after the power-down of the battery-pack. That way when the power goes low it can record the time and trigger it again (maybe repeat a second time for more confidence).
He covered that I think: there was no easy way for the ATtiny to turn the power bank back on once it had gone into "low output" mode.
I might have missed something, but I think that was the problem.
@@tjwatts100 That was with an external power source and he talked about how it worked but he decided to go a different path.
@tjwatts100 is right: The power banks did not switch off even with the lightest power draw.
That fact, after you had a good sleep - suddenly you have all the answers. Our biggest enemy is our tired brain.
I agree!
When you have thought yourself into a corner, you have to wait for the paint to dry.
This so true. I often go to bed with an open issue, no solution to a problem. Next day, as by magic, I know what to do.
@@BerndFelsche... no need to wait for the paint to dry if you are Tom (Tom and Jerry). You just paint a door on the wall, open it and exit.
I call that Bad Dreams because If i wake Up i have to repeat what i did during my sleep ... Thats working twice and to be Safe you have to think twice too.
Greatz from Germany
and have a nice Day
opo
Thanks Andreas! Great video! I learn so much from you and Great Scott :)
Glad you enjoyed it!
Omg !! Clash of TITANS 🤩🤩! Two of my favorite UA-camrs !
No clash. Collaboration ;-)
I use Tiny212/412 for few years and with internal 32k oscillator as main clock it takes around 6-10uA even without sleeping (of course if you enable ADC or DAC references -> hundreds of uA. Or if you forget to disable unused pins - then it's in milliamps). With MicroUpdi programmer and Microchip studio (it needs to disable "only supported devices") you can do full On chip debugging (or many others with UPDI like AVR Dx)
Thank you for the additional info.
Debugging is a neat feature! I did not check if it is already supported by the new Arduino IDE.
@@AndreasSpiess It probably isn't in the Arduino IDE. Just Microchip studio + MicroUpdi or other Microchip debugger. For Mega4809 i just created template with arduino core and I can just switch between 808/809 ... 4808/4809 (libraries are quite anoying as it doesn't have common mcu setting in the Microchip studio). And for the tiny212/412 memory is so small I almost run out of the flash just using floats (uint32_t wasn't much better) :D
First I thought the sound of Scott´s voice is imitated intentionally and I was waiting for mocked intro -> Leeet´s get started :)
Actually, we have a similar "basic language" that creates our accent...
As always great video, I admire your skills
Thanks for the visit!
After this video I need to search the web for some opensource powerbank project capable of USB PD charging. Great work, have a nice day!
I am pretty sure you will find one.
Excellent video and great update idea!
I didn't know, that there is new ATtiny series available. In some projects it may be better to use new ones. I need to look at them deeper. Probably, they are not supported in older AVRstudio. With ISP I love, that I can directly program chips from studio..
I never used AVRstudio…
Yes, very interesting. I built a couple of projects using the ATtiny 85 last year. I'll have to get some of the 412's and some with more pins. Thanks..
You are welcome!
Great video. In addition the latest ATTiny 2-series have an excellent ADC configurable up to 17 bits and can work in differential mode accepting rail voltages (direct current measurement with a shunt resistor) . Unfortunatelly the smallest in this family is 14 pin part.
I also was looking for the -2 series and did not find a lot of chips available. This is why I did not mention them.
Very nice - this is really quite useful!
Glad you think so!
I thought i was buying bad power banks . Drives me nuts . Plug in something, walk away and it randomly stops charging . Ridiculous !
Thanks for solving this issue
If it has more than one port, try different ports
Indeed, it was astonishing to me, too.
Love your spicy humor in this one. I wanted to build such a device like GreatScott, maybe it will be two now. :D
Thank you!
And abter building both, you can dedide which one you like better ;-)
This reminds me greatly of my adventures with the 10f200 (6 pin IC). "I'll start so small, it'll be easy!" oh that caused such a headache with the pin multiplexing. I had to figure out how to repurpose the /RST line as input, the other 3 GPIO pins charliplexed 6 LEDs. One cool side effect was by using the /RST like I did, the project uses no real power while off, as a micro-solar cell actually holds it in a halt state, being used as a light sensor basically. Not enough to power anything, but enough to bias an input pin.
Indeed, 6pins is not a lot for a microprocessor!
Thanks!
thanks for your great videos
You are welcome!
There is an 8-pin SO version of the super-cheap Risc-V CH32V003. More everything than the ATTiny for a third of the cost - not sure offhand about the sleep performance though
Another commenter also mentioned it. Did you try it with the Arduino IDE?
@@AndreasSpiessThe easy of use of the Arduino IDE is kinda wiped out by the janky harness needed to program it.
@@AndreasSpiess No - used the manufacturer's tools. I think there is now an Arduino setup for it though. Another nice thing about that MCU is it needs only one wire for programming and debug
I needed a protection circuit for 12V lead battery overdischarging, but couldn't find anything, only for Li-Ion.
I made a simple one with ATTiny85, similar to the circuit you made, only different purposes. I could use software serial for debugging. It consumes really low amount of power when sleeping.
However this new version makes it even more interesting, thank you for the video!
A good idea to use an ATTINY for such a project!
Very interesting approach for you. I have great respect for both channels. I'm also a hardware design engineer. But a perfect solution would be a solution that doesn't lose any power. So I prefer to see a solution without the resistor to ground. So use a kind of buck/boost converter setup to trigger the current monitor in the power bank and release the energy to the connection that uses a small amount of current. Maybe I'm making this project more complex than needed, but that would be a perfect solution.
Well. I had some minutes to think about it. Storing energy temporarily in a coil/capacitor could be a solution, but if it stores that with 100% efficiency (which it doesn't do!), we have still a problem. What is the real energy usage (E=P*t) of the device connected on the output? If the energy usage is less than the energy that we draw each full period (Ton+Toff) from the power bank to keep it alive, than an extra resistor is still needed. Please ignore my solution 😜
I love attiny chips! Always looking to use them when I can
Good "behavior" ;-)
Very nice with the new way of programming, certainly makes hobby projects much easier.
As for automatic adjustment... wouldn't it be possible to have a capacitor keep the ATTiny alive for long enough to write a new cutoff value, reset the USB and come back up with a new interval to peak at?
Of course this would only work going from a longer interval to a shorter.
So on first power-up it would always need to start with a long interval and wait for the first cutoff, adjust and reset the USB.
You could make a switch that could discharge the capacitor if you hold it for 2-3 seconds while disconnected, so you're sure that it "starts over" if you switch between banks quicker than it can use the charge.
The electronics around the uC isn't my strong point, but I love playing around with the uC software. So I'm just suggesting something I could imagine could work.
Best is always to try it. These powerbanks are quite tricky...
Ok the one pin program thing of the new chip actually sounds super cool and useful :O
It is!
Thank you for showing the new attiny :)
I am approaching a similar project with storing values before switching off the chip. Do you know how the microchip behaves, when the chip is turned off while writing to the eeprom? Or does the capacitor store enough energy to complete the writing step?
You can increase the value of the cap to make sure this does not happen. But it will be a very rare event in my setup.
Neat! I’m going to have to find a project where I need these cute chips! As an fyi, voltaic systems makes a line of battery packs that don’t have the auto off function so they work well for low power devices. I’ve been using them for years. Very convenient.
Thanks for the link. They seem to have a nice line-up!
@@AndreasSpiess Nice solar panels, too! You might be interested in their Capacitor-based power cell for very low power applications.
The AT tiny is a wonderful chip! Perfect for very simple tasks!
I agree!
Great video, I gave you a like. At 9:38 EEPROM cells don't always last for 100,000 writes per memory address (location), many work on memory pages (sections), say 256 bytes in many EEPROMs but this one is only 128 bytes total, so you should experiment to find out if 100,000 writes to the first EEPROM address will wear out the first address only or its entire EEPROM in these tiny devices. 100,000 writes is guaranteed, many can last a bit more before they finally fail. But 100,000 "learning" sessions is a LOT, the USB contacts are more likely to wear out before then.
Thank you for the "like". Indeed, EEPROM wearing is probably not an issue for this application.
there's 1 rewrite per second, so that's. 100k sessions / (number of seconds measured), bringing it down to a much lower 100s or 1000s of sessions
I kinda expected you to count the time but also have a second counter that gets reset to 0 after a few minutes of runtime. Gets counted up un init and of its at a count of 3 it tries to update the time.
The new way to program the microcontrollers sounds great.
That could for sure be included in the sketch.
@@AndreasSpiess could also over engineer it with a buffer battery or so...
If you ever need to measure the voltage at the supply pin, some AVR microcontrollers have the internal bandgap reference wired as an input to the analog multiplexer, which means you can measure the voltage reference voltage using the main supply voltage. This is equivalent to measuring the supply voltage with the internal bandgap reference, just with swapped values in the formula. This will spare an analog input pin. I don't remember however if the ATtiny41x have that feature.
I did not look at the ADC (I just used it). But I once made a video abour using the internal bandgap reference of the 328P...
Thanks really enjoyed this. Not done any electronic (or even thought about) for too long now so was a nice exercise to read your circuit diagram (and pleased I still could!). I think in my own version, given the voltage input tolerance of ATTINY chips (the 85s at least) I would have experimented with a beefy capacitor on the input and use your "voltage" to look for a drop off. This way hopefully, one could cut out the need to record/time/trigger the "stimulate" and "run on air" as it were (the capacitor) when the power cuts which would hopefully be enough time to trigger/sustain the stimulate load to turn the thing on. Ideally then you'd only get a very momentary cut of power to the main device being powered. If that isn't acceptable though, could just use the cap that one time for the initial measurement, then go back to timing/triggering an early (before cut off) stimulate.
I've had this cut off issue with USB lights before on power packs and indeed it's irritating so a nice idea from Great Scott to make a work around.
Indeed, a cap would power the ATTINY for a moment to save the value in EEPROM.
@@AndreasSpiess surely flipping a pin to get the power going again though would be even faster... then just keep in RAM
@@AndreasSpiess really does make me want to experiment to see what the art of the possible is...
i love your sense humor 🙂
Thank you!
Nothing can beat the NE555! :D
Great video as always. Got some in my cart from Digikey, I was about to order some Tiny84s anyway (for a previous kit project) it'll be fun to experiment with this. I prefer direct C/GCC programming to Arduino, so I can do lower power (one of my Tiny85 boards was still OK and woke up having been left in sleep mode after 5 years on a CR2032). But maybe I should mess around with it again.
Astonishing! I think you can go quite low power with these chips also with the Arduino IDE. At least you can select the clock rate and some other features. And you can use deep sleep.
Love Microchip. I launched one of the very first high volume PIC designs in Michigan in the late 80's in the hundreds of thousands per year (PIC16C54) on vehicle remote transmitters. One Time Programmable only, but this was revolutionary then as most parts were mask ROM at the time. They even put those devices into SOT packages. They were marketed as micros but were used as "ASIC fixers" to fix small hardware bugs in complex ASICs. Cool company!
I learned about the first steps of Microchip from an interview on the Amphour podcast (with the former CEO). Very interesting!
Great video, thanks!
These new ATtinys with simple programming are great! 👍
On my (too long) list of project is one where I can force an old Intel NUC into starting Windows as soon as I power it up (I could not find this setting in its BIOS)
I will now probably attempt to achieve this with an ATtiny 412. 😊
Question: do you know if you can program these ATtinys with PlatformIO?
Since PlatformIO uses the Arduino framework it should be possible.
I love your videos so much man.
Thank you!
I love these new ATtinys, they are my go-to MCUs now for small tasks. Even the 202/402, I wouldn't say they're outdated, they just don't have a DAC which is an awesome feature. As for the odd fakes, my guess is that there was a mistake in production (wrong die?), and someone raided the trash can, picked up that batch and offered it for sale per the marking 😀
Somebody wrote that it was a mistake Microchip made and even Mouser had them on sale ;-)
I like the Swiss humor in particular! 😅👍
Thank you!
I am so happy I subscribed to your channel!
I've got a tube full of old ATTINY chips that I can't use, because they will no longer program since I "upgraded" my old PC. Now that they came out with a new and improved ATTINY, I'll have to order some of them. I currently have no Nano, so is there a "ready to go" ATTINY programmer I can buy? If so, which one will work with a USB cable on a current PC?
You can also use a standard USB to Serial adapter and SerialUPDI (Google). It works with the Arduino IDE.
If you have a desktop, they often have serial ports even now, at least the motherboards offered to custom builders often do. They're just not populated as a port you are familiar with. Often they're just pins on the board. However, $5 adapters exist that hook to those pins and go on an unused expansion slot to turn those pins into a physical serial port. Laptops though... ugh they have limited IO and you're stuck with any off the shelf USB to serial or whatever you want.
After a severe head trauma, Great Scott, Andreas Spiess, Big Clive, and Nick from The Linux Experiment, have helped me to come back. Now I'm helping to build the AI Museum in Stockholm, Sweden =)
Excellent! Good luck!
Can definitely recommend these chips! Used them as well
Thank you for sharing your experience!
Extremely helpful. I like the supercap idea. Also you might need to tell the difference between the mains and the battery. You might could assume that you are hooked to mains unless you see the pulse which case you know you have a battery. This could also be the basis for an uninterrupted power supply circuit!
Good ideas for a second revision!
I love the Attiny412 (correction: i used the 402) so much, I bought 100 of them.
They are already in:
- a DIY battery management system/balancer (one attiny for each cell)
- IR remote controlled RGB D&D props
- a battery adapter (DC-DC converter) for my robot vacuum so it runs off standard 18650s
edit: seems like the one I used is the 402, but same things apply: cheap, only 1 programming pin, easy to use.
The difference seems to be that the 402 does not have a DAC. So no issue if you do not need it...
Some time back I used a Digistump for the same purpose. It is a ready made ATiny85 board with easy programming and plugs into an USB-A connection of the powerbank. I created ~100mA over 500ms just through 2 GPIOs, with 100 Ohm to GND each. Works without magic smoke ;-).
Cool!
Shortage perhaps lead to those chips, where they chose to package a different die in the 8 pin package..
Maybe an explanation. It would be good to declare it in the description (if it is a different chip or only a different signature that easily could be fixed during upload)
the "new" attinys are great. I have used them in my lora weather probes which car run of a single cr2032 for about 2 years while sending data every 5 minutes.
Cool project! They can be really low power.
This reminds me of one important lesson my lab teacher taught me: "Is the reduction of material expense or the software's efficiency worth the R&D time?" Sometimes a quick (and ugly) solution is much better than clean code and few components. That new mindset helped me complete assignments on time, at the same time that started a trend of me doing assignments twice, once in the required way, once in my way, because I often wouldn't be satisfied by the solutions I found on the spot.
I agree: All depend on the numbers. For a small series, material cost is not the issue. But if you create an iPhone, a few cents can make a difference.
Here it is a hobby, and its main product should be fun. So it might be a bit different...
I work in a company where people from long before I joined used to think like that. Now we pay a heavy price in tech debt where our old projects are almost unmaintainable. We spend days sometimes analyzing old code because when we need to make a simple change and it breaks everything. Pretty much all of the code is kept in a "functions.c" file with a lot of inline #ifdefs for product variants and a LOT of global variables that are cryptically named and reused across multiple functions and stuff like 6800 LCD display logic and switch matrix scanning mixed in with actual presentation logic. It's almost like programming in assembly but in C and the global variables are your registers or something like that (I guess maybe the guy who made that code probably learned to code in ASM before C for MCUs was even a thing, and made the jump to C but kept the same programming mindset). The same goes for the hardware as sometimes they didn't even bother connecting I2C lines to the actual I2C pins in the MCU, so then someone had to make a bitbang I2C code for it. Thankfully upper management realized how much of a problem it was causing and now we're rewriting and redesigning our products from scratch one by one
Great Scott and the 555 timer have a similar relationship like electroboom and the full bridge rectifier
Maybe...
OK. I had a fresh pair of eyes and I retried using ATTiny with ATTinyCore and Arduino IDE 2.3. I am using clone Nano for ISP, so it's Arudino Nano (old bootloader). I had to select ATTiny25/45/85 (no bootloader). I did all of this stuff before. BUT ... this time I realized that I had to go to the "Sketch" menu and select "Upload using programmer." EUREKA!!! I never felt so much joy looking at a blinking light. 😀
Cool! I am happy it worked.
Asianometry did a great Video about fake ICs and recycled ICs
Indeed, I saw it. This fake maybe is not a real fake as anohter commenter wrote. These chips were even sold by Mouser, etc... But of course, I do not know.
Hello Andreas,
very interesting project. Where can I find the (final) schematic and the arduino code?
Why do you use the battery cell anymore?
In the schematic you connect the 5V to the 3,0V battery. Why?
best regards
Frank
I did not publish the code or the diagram becasue it is very simple. I removed the battery and powered the chip directly from the power bank.
I found it easier to wire directly to the charge boards +- for circuit power. I retain the charge controller for well charging the cell attached. I ran this outdoors for 3yrs on a soil and light monitor for my wife. No need for the additional circuit.
If you want to opne the power bank, this is a good idea!
@@AndreasSpiess we are makers afterall 😉
That this whole project was inspired by the channel motto of "WE WANT MORE", (3:09) while making use of fewer resources. Learnt so much more than if a 556 dual timer had been used. Will now be revisiting ATtiny's .. for just the right amount of Swiss AI.
Indeed, I used this project also as an excuse to learn about the ATTINies...
I recommend getting the green strawberry PE sheet for that and some custom made warp grills, Bussards and cobra heads. Greatly improves the ships!
???
@@AndreasSpiess goddammit UA-cam, why did you have to post my comment to a completely different video? 😪
nice to see you again sir , i was watching your videos when i started learning electronics with arduino (and still)
Welcome back!