Rx100 Clutch plate fitting | rx 100 की clutch fit karne ka sahi tarika in full detail
Вставка
- Опубліковано 16 вер 2024
- Fz ki disc brake kaise thik kare
fz brake problem solved
Bike brakes problems solved
Tank lock problem
Tank lock air port problem
hoe to check tank air lock problem
Royal Enfield
Himalaya king
Rx king 👑
Access bs6 model race problem
Samurai to rx silencer modification
Rx 100 clutch fitting
rx 100clutch overall
yamaha clutch fitting
Valve Grinding jugad
head Valve Grinding jugad
How to change drume rubber
How to check play of drum rubber
Discover kick Spring ka jugad
discover kick Spring jugad
simple jugad discover kick Spring
Yamaha full Restoration
Yamaha rx100 full Restoration
Rx100 overall
Here is a description of how to fit the clutch plate in a Yamaha RX 100 motorcycle.
§
1. Start by ensuring that the motorcycle is in a well-ventilated and safe working area. It's also a good idea to have the necessary tools and a service manual for reference.
2. Begin by removing the clutch cover. This is typically located on the left side of the engine and is secured by bolts. Unscrew the bolts and carefully remove the clutch cover.
3. Once the clutch cover is removed, you will see the clutch assembly. The clutch assembly consists of the clutch basket, clutch plates, friction plates, and the pressure plate.
4. Use a clutch holding tool or a cloth to hold the clutch basket in place. This will prevent it from rotating as you work on it.
5. Start by removing the clutch pressure plate. It is usually held in place by bolts or springs. Carefully loosen the bolts or remove the springs, and then take out the pressure plate. 6. With the pressure plate removed, you can now access the clutch plates and friction plates. Check them for wear, damage, or signs of excessive heat. If they are worn out or damaged, replace them with new ones.
7. To replace the clutch plates, alternate between a clutch plate and a friction plate. Make sure they are properly aligned with the splines on the clutch basket and the notches on the pressure plate.
8. Once all the plates are in place, re-install the pressure plate. Tighten the bolts or reattach the springs to secure it.
9. Double-check that all the plates are properly aligned and seated in the clutch assembly.
10. Put the clutch cover back on and securely tighten the bolts.
11. Finally, adjust the clutch cable tension as needed. Ensure that there is proper free play in the clutch lever and that the clutch engages and disengages smoothly. It is worth noting that clutch plate fitting can be a complex task, and if you are unsure or uncomfortable performing it yourself, it is advisable to seek the assistance of a qualified mechanic. They will have the necessary expertise to ensure a proper clutch plate fitting on your Yamaha RX 100 motorcycle. I hope this description helps you with the clutch plate fitting process. If you have any further questions, feel free to ask. Happy riding
Like
subscribe
share
karo plz - Авто та транспорт