Brand new to HueForge? Start here! (0.7.3)
Вставка
- Опубліковано 17 вер 2024
- I went over some tips and tricks for starting your very first HueForge. Hope this video helps, feel free to ask any questions in the comments. I do presentations on Polymaker's Discord every Friday at 7pm cst if you want to come and join live.
AJAX-3D: ajax-3d.com/re...
Socials: linktr.ee/neok...
HueForge aff: shop.thehuefor...
Polymaker aff: us.polymaker.com?aff=710
Polymaker Discord: / discord
This is what we need, short to the point and about something specific. Concentrating on a section of options at a time was the ways to go. Thanks.
That I you for the tutorial!!!!
Who are those people that say it’s too complicated? If you know anything about printing and how bamboo lab works, it’s easy.
A lot of people don’t understand either
@ 14:09 the button for the slider you're adjusting turns yellow. What does that mean?
Its controlling your top most slider that controls the depth of the mesh in dynamic
Great video! Thank you for the tutorial. I am having issues with my new .2 mm nozzle. I am getting warping and edge peel that I did not get on my .4mm nozzle. Tried printing with a brim and it lasted longer but still failed. Right now I am printing witha brim and with my part colling turned off. Any other advice here?
Enclosed or not enclosed?
@@NeoKoiPrints I’m working on an A1 so it’s not in closed (I do have an x1c but don’t want to keep swapping that nozzle out. I am considering a hot swap option)
@rotciv1577 im wondering if some cold air is hitting an edge, or if the plate is dirty
@rotciv1577 maybe slow it down a little bit
@@NeoKoiPrints I had turned off all the fans in the room (that was my thought too. But to no avail.) Cleaned the build plate but haven’t tried a different one yet.