"Reviting" video. My eyes were glued to the screen in suspense for the whole 45 min.. I've been using Revit for 11 years and this tutorial has opened a whole new world for me. I hope UA-cam is paying you well so you can keep posting more.
brother you are just great !! thanks a lot for the chanel and the tutorials, realy amazing, i would never imagine something like that in revit, thanks again, and please keep going...
Good work! you did an interesting structure but if you don't mind my suggestion you didn't have to create a new family and use the divide path to create the main structural beam on minute 35 onwards Any reason why you wanted it to be a separate family? (You could have made it by placing a profile in the spline from the main family and created the sweep)
Thanks for watching. Yes great suggestion, appreciated. I just want to show the use of adaptive modeling which is very powerful in creating organic form.
Amazing!! I'm trying to make the same thing except it has a hole in the middle so I guess I follow the same steps and then use void to cut the hole in the middle?
thanks for the vid, but I have a question on the thumbnails of the video, you have a element similar to the one you made as an adaptive component but you did not show how it's done on the video. How do I do it?
This is so good , but can you show us how to render it on lumion , bcz I’m trying to but in lumion the loaded family is taking the same material , i mean i cannot select just the frame separated from the film to assign different materials.
First, you need to have separate material for the frame and the panel in revit file. Lumion will capture different material from Revit then you will able to provide different material as well in Lumion. Hope I answered your question.
@@NonStopLearning101 i tried that but because the family is loaded on another mass it became a single object to select and can’t separate the frame from the film.
thank you for the tutorial, it is really helpful. may I ask a question, how to make the biggest pole of the pattern based model family to connect to each other? I tried load it to a project with a different mass but somehow they become separated after I load it.
lets say that i want to create mass floors inside this construction. how does that work? I cant create mass floor inside a family, n'or if i load the family in the project.
The Geodome is quite different - it has triangular faces, and its shape comes from tesellating the faces of an icosahedron and projecting them onto a sphere with the radious of the icosahedron. You could still apply the same principle to create the panels.
I don't know in what way one can use BIM for tensile architecture other than geometrical representation. The form presented here is not obtained via any proven method, Force Density or otherwise. The final textile form is neither a minimum surface or surface in equilibrium. In that sense there is nothing "organic" about it. Furthermore, most of these algorythms are mesh based, hence BIM for formfinding is out of the question. Don't even get me started on analysis or patterning... The industry itself is very specific for the implementation of BIM.
"Reviting" video. My eyes were glued to the screen in suspense for the whole 45 min.. I've been using Revit for 11 years and this tutorial has opened a whole new world for me. I hope UA-cam is paying you well so you can keep posting more.
Thanks, much appreciated your comment...
This is so amazing! Learnt so much from watching and following this! Excited for all the forms I'll be making now!
Glad you liked it
Thank you very much. It's all very good : Tutorial, explanation and a calm music. Chapeau !
Glad you liked it!
brother you are just great !! thanks a lot for the chanel and the tutorials, realy amazing, i would never imagine something like that in revit, thanks again, and please keep going...
Glad you liked it
Perfect job! Thanks from China!
Good work! you did an interesting structure but if you don't mind my suggestion you didn't have to create a new family and use the divide path to create the main structural beam on minute 35 onwards
Any reason why you wanted it to be a separate family?
(You could have made it by placing a profile in the spline from the main family and created the sweep)
Thanks for watching. Yes great suggestion, appreciated. I just want to show the use of adaptive modeling which is very powerful in creating organic form.
9ibiob J in bbii. ? Nnk nnjk
Thank you so much!
Hope you keep going sharing tutorial!!!
Glad you liked it
Your the best ! Please continue have a page to support you.
Thanks, appreciated
excellent work shop ,thanks alot
Thanks
21:28 / 42:55 I cant place reference line on the dot that under 0.00height help!
the best channel
thank you very much, appreciated your comment :)
Cool stuff. Next time record the fan of the pc and put that as soundtrack.
Glad you liked it
Thank you very much very nice video
So nice of you
Why does my dome end up being an imported symbol rather than a form? A box is around it, and I cannot modify the triangles.
check carefully the properties
Thanks you are amazing!!
Glad it helped!
wow.. thank u so much. this is perfect tutorial!!
Amazing!! I'm trying to make the same thing except it has a hole in the middle so I guess I follow the same steps and then use void to cut the hole in the middle?
great job !
Glad you liked it
thanks for the vid, but I have a question on the thumbnails of the video, you have a element similar to the one you made as an adaptive component but you did not show how it's done on the video. How do I do it?
Hola! AYUDA! Cuando intento cargar la masa a mi proyecto, se deforman los bordes, necesito ayuda urgente please :(
Thank you for watching!
if i have other proyect, can i use this roof for that build?? is this adaptative for another proyect? very cool structure! thanks
Yes, absolutely
thanks!
Thank you for watching 😉
great job
Glad you liked it
when you are drawing family 2, my brain has stopped to work
thanks for watching
thank you so much please keep going sharing tutorial
Thanks! Glad you like it
Hi! Can you teach how to load this mass into an existing project? I have tried to do it and the conceptual mass is deformed.
Try again and be very careful on the constraint you are adding which will make your mass deformed.
Is it posible to change the texture/material of roof? that yellow one, I want to chnage it in Nipa
How do you perform material calculations after you've done it?
are you talking about the BOQ? it's a little bit tricky
I dont have family template called metric ceramic model pattern based...where can I download it???😣
www.bimobject.com/tr
try bimobject.com or revitcity.com
Нормас!
Thanks for watching
how to change the truss direction perpendicular?
Create the object on the opposite side of the truss
This is so good , but can you show us how to render it on lumion , bcz I’m trying to but in lumion the loaded family is taking the same material , i mean i cannot select just the frame separated from the film to assign different materials.
First, you need to have separate material for the frame and the panel in revit file. Lumion will capture different material from Revit then you will able to provide different material as well in Lumion. Hope I answered your question.
@@NonStopLearning101 i tried that but because the family is loaded on another mass it became a single object to select and can’t separate the frame from the film.
thank you for the tutorial, it is really helpful. may I ask a question, how to make the biggest pole of the pattern based model family to connect to each other? I tried load it to a project with a different mass but somehow they become separated after I load it.
Thanks, glad you liked it. You can adjust the size in the parameter setting
organic form is effective in revit
cool
Life save moment
Thank you for watching!
how do you rectify "cant make type" error
Hi can this roof be applied on a train station building
absolutely
lets say that i want to create mass floors inside this construction. how does that work? I cant create mass floor inside a family, n'or if i load the family in the project.
Thankz for watching, you need to load to a project then go to massing and create floors
Great job! Thanks
Thanks
the frame down? what is the logical step.....
Glad you liked it
excelente vídeo
Glad you liked it
Very nice❤❤❤
Thank you
Great tutorial , keep uploading pls 😅😅
Thanks for watching and appreciated much your comments which make me inspired to create more tutorials. God bless!
in which units are you working?
Thank you for watching! metric
The family cant fit to the project what can i do.it makes error.
Same
you need to cross-check the pattern you chose in the Properties Tab, it shall be matched with the one you created. good luck
how would you place it on modelled trusses with existing references for the framings?
It will need another tutorial for that
please talk in your videos. i think it will be helpful to follow
THankz for watching. soon!
THANKS FOR THIS TUTORIAL CAN YOU INFORM ME WHAT IS WRONG IN THIS PARCTICE
thankz for watching
thank youu so much
You're welcome!
please show us how to perform static test of this form?Yours truly
Short answer... You can't. Not in Revit that is... Try Technet's software EASY for that...
thank you so much
glad you liked it
Is it possible to do this on a GeoDome?
Awesome Tutorial btw xD
The Geodome is quite different - it has triangular faces, and its shape comes from tesellating the faces of an icosahedron and projecting them onto a sphere with the radious of the icosahedron. You could still apply the same principle to create the panels.
Glad you liked it. If you have the GeoDome model, you can use the shape as a surface. however, the modeling for GeoDome is different
well explained. thank you!
the song is not recommended thanks for the video though
Thanks
Can I get the file bro?
thanks for watching. sure
@@NonStopLearning101 thanks a lot bro people like u are key for someone’s success ❤️
I don't know in what way one can use BIM for tensile architecture other than geometrical representation. The form presented here is not obtained via any proven method, Force Density or otherwise. The final textile form is neither a minimum surface or surface in equilibrium. In that sense there is nothing "organic" about it. Furthermore, most of these algorythms are mesh based, hence BIM for formfinding is out of the question. Don't even get me started on analysis or patterning... The industry itself is very specific for the implementation of BIM.
well explained. Thanks
I wish if you had just have this video with voice.
next time, let see
Wow .. have u gone for training in the past?
Nope, only self-learning. thankz for watching!
@@NonStopLearning101 Love it... Subscribed ! THANKS!!
32:36 dk. I can't catch the points :(
ARTI EKSİ d ne diyon reis?
@@yenibosnapostas9909 dakika 32:26 da noktalar arası splıne çekiyo onu beceremedim diyorum
ensure to select Reference Line and click Spline, good luck
Thank you bro
Thanks for watching
Thank you!
Greattt
Glad you liked it
I WNT TO SHOW YOU MY PRACTICE BUT HOW CAN I DO THIS ?
Thankz for watching, drop me an email
Background music irritating
will improve next time
great content. music has got to go...
Thanks for watching
HAVE YOU FACEBOOK PAGE TO CONNECT US ?
والله بهدلتنا بتعليقاتك
حاول تكتب انجليزي بشكل صحيح
drop me an email. thankz for watching
I have recreated this work on revit and sale it on Fiverr. 😊😍
That is awesome!