Thank you for your video. You made it look so easy. It took me over 25 minutes just to remove the back cover. I kept on pressing the power button. The corner wouldn't release. The LCD display was easy to remove. Apply heat to a small area, separate with razor blade, insert plastic clip and move repeat process. Because my display was badly cracked I covered it with tape.
It's the best video out there on that topic. Thank you so much for putting that out, thanks to you I was able to replace my nephew's screen without paying a lot for someone else to do it.
I loved your vid. You were so articulate and made it without all the nonsense that other DIY vids seem to have. No continuous uhms and ahhings, plus the fast forwards on the screw stuff. Your vid is by the far the best; 'How To', I have ever, ever seen, and trust me, I've watched a lot because I'm cheap...lol I hope I can replace my screen without trashing my phone. 🤞 Thanks for making this vid. You rock.
Really nice video. The only thing that in my experience is a bit misleading is that, despite using the exact same glue, it started drying really fast (like after a few minutes it was already not liquid anymore) so by the time I put the clamps it was impossible to push the screen as far as it originally was. If i were to redo it again I would not take the time to entierly reassemble the phone, just glue the screen and find a way to clamp it without damaging the internals
Good advice, whatever works for you (and others.) On most phones I generally set the screen down with no glue, assemble, and then glue the screen down. Some phones don’t make that easy to do, but most do.
I bought the a03 as a cheap replacement of my a13 after I broke the screen and was wondering if I'd be able to take screen from that and install it in my a13?
@@RealWorldReview I do find it amusing how they seem really similar but made minor changes so stuff like this can't happen. Even the volume and power buttons are identical but they slightly moved them so I can't use the same case
@@JulianFabrizio44 there’s little stuff like that, but you have to think the screen isn’t the exact same size because of the glass. Then there are chips in the screen with may or may not allow the screen to power on. Even the 4G and 5G version of the A13 alone is not swappable. Seems dumb but that’s what it is. Also the A03s and A13 have different refresh rates. Old the A13 4G is a 1080p screen and the 5G version is 720P
@@RealWorldReview thanks for insight. I'm the kind of person who likes to be able to fix things myself from automotive to construction but these electronics are a whole different animal. I do hope in the future these companies start to focus more on repairs and not replacing.
Good video..is the glue used in this video good and would anyone recommend it for screen replacements..so far i have been using double sided adhesive tape and that works good but for some phones glue woild be a better option
Is the screen replacement you installed blurry when you use the phone? I'm planning on buying another screen replacement for my A13 4G because the quality of the first one that I bought wasn't great.
I need help! I have pretty much followed every step until checking see if the screen works. I connect the phone to the charger and the whole screen turns on but whenever I try to power on the phone. It does not want to power on. I really don't know what to do. Everything seems fine except for the power on part. I tried a lot to power on the phone but I can't just seem to power it on with the power on button. Is there any way to fix this or should I just buy a new phone?
After months of experience, the power buttons on the A12 and A13 suck and will just fail randomly. Might be a small tear in the cable and won't work anymore.
Unfortunately I cant get the screen loose with just the pick! also tried with the razor but mine is too weak to put pressure to 'crack 'it open as it looks in the video and i kinda cut my hands now xd. any tips?
@@RealWorldReview The way the screen should be made is that replacing it shall not make one disassemble the whole phone. In my case I followed the video from Mike at gocellphonerepair to replace my broken Galaxy J7 Perx display and it was just scrapping the old one from the front and disconnecting one cable, all without touching a single screw.
How did you get the back cover off so easy? I got one side started with a plastic pick but I can't get around the corner to get the top or bottom loose.
Hey Quick question.I'm trying to figure out if I need to replace my battery or my screen.I dropped my phone and I won't turn on.Even when I tried to charge it, leaving my charger and press the power.Nothing's working.So should I try replacing the screen or the battery?
After i replaced my lcd there is a blue light appearing on the screen everytime i used it and the keyboard im having a hard time 2 press the letters. What seems 2 be the problem?
Bro because the top of my phone keeps crashing randomly like I dropped it 1 day under the car on a rock and there was a Crack in the middle but the top just keep cracking so I'm keeping this video unless it brakes
As I got to the step to remove the battery, it began going "Pffffffffffftt!" Smoke everywhere, then flames shot out of I guess the battery. I had been working on a wooden desk, quickly knocked to the floor, where it then set a rug on fire. I have no idea what the issue was, but this Samsung battery started a large fire, burned holes in a rug, stunk up my house, luckily I was right near it when this happened. No clue why. Threw the smoking phone & battery out my door onto the wet lawn.
Hello there. I hope you can help. My son (15) replaced my broken A13 4g screen and the frame it is housed in. The screen works but is really quite dark and dosent change with my brightness slider. Can you help us figure out what went wrong? thank you
Phone was working fine for a few days but I messed up using household liquid glue, didn't consider it would heat up and melt over time and stop working. It made the display layers split from each other not sure if a new display will fix the issue, will see.@@RealWorldReview
"Glue around the frame. Be careful around the top camera, but the camera's not that good anyway." 😂😂😂
He's right... it's such a piece of shit lol
Finally a decent video on how to replace the screen of a Samsung Galaxy A13 4G/5G. Thank you for making this video man
Cant believe a shop near me Charges $110 for this. tf
same here, it's $100 just for them to open it up regardless of what the problem is...
Thank you for your video. You made it look so easy. It took me over 25 minutes just to remove the back cover. I kept on pressing the power button. The corner wouldn't release. The LCD display was easy to remove. Apply heat to a small area, separate with razor blade, insert plastic clip and move repeat process. Because my display was badly cracked I covered it with tape.
Thank you for this tip
It's the best video out there on that topic. Thank you so much for putting that out, thanks to you I was able to replace my nephew's screen without paying a lot for someone else to do it.
I loved your vid. You were so articulate and made it without all the nonsense that other DIY vids seem to have. No continuous uhms and ahhings, plus the fast forwards on the screw stuff. Your vid is by the far the best; 'How To', I have ever, ever seen, and trust me, I've watched a lot because I'm cheap...lol I hope I can replace my screen without trashing my phone. 🤞 Thanks for making this vid. You rock.
What kind of clamps did you use in the video? I gotta get me some of those.
Good vid! Hope its as easy as u make it look.
Yooo... superb work. I'm looking forward to see different models in the future.
Really nice video. The only thing that in my experience is a bit misleading is that, despite using the exact same glue, it started drying really fast (like after a few minutes it was already not liquid anymore) so by the time I put the clamps it was impossible to push the screen as far as it originally was. If i were to redo it again I would not take the time to entierly reassemble the phone, just glue the screen and find a way to clamp it without damaging the internals
Good advice, whatever works for you (and others.) On most phones I generally set the screen down with no glue, assemble, and then glue the screen down. Some phones don’t make that easy to do, but most do.
Where did you order the replacement?
Amazon
I purchased my replacement from AMAZON.
Link in the description
Just done changed mine following this, thanks a bunch!
Can T7000 and the others listed be used for a variety of phones e.g. Samsung Galaxy S10 and the A12? Thanks
I bought the a03 as a cheap replacement of my a13 after I broke the screen and was wondering if I'd be able to take screen from that and install it in my a13?
Not at all. Too many different parts
@@RealWorldReview okay thanks
@@RealWorldReview I do find it amusing how they seem really similar but made minor changes so stuff like this can't happen. Even the volume and power buttons are identical but they slightly moved them so I can't use the same case
@@JulianFabrizio44 there’s little stuff like that, but you have to think the screen isn’t the exact same size because of the glass. Then there are chips in the screen with may or may not allow the screen to power on. Even the 4G and 5G version of the A13 alone is not swappable. Seems dumb but that’s what it is. Also the A03s and A13 have different refresh rates. Old the A13 4G is a 1080p screen and the 5G version is 720P
@@RealWorldReview thanks for insight. I'm the kind of person who likes to be able to fix things myself from automotive to construction but these electronics are a whole different animal. I do hope in the future these companies start to focus more on repairs and not replacing.
What is the name of the Glue,and where can you get the Clamps
Good video..is the glue used in this video good and would anyone recommend it for screen replacements..so far i have been using double sided adhesive tape and that works good but for some phones glue woild be a better option
Is the screen replacement you installed blurry when you use the phone? I'm planning on buying another screen replacement for my A13 4G because the quality of the first one that I bought wasn't great.
I need help! I have pretty much followed every step until checking see if the screen works. I connect the phone to the charger and the whole screen turns on but whenever I try to power on the phone. It does not want to power on. I really don't know what to do. Everything seems fine except for the power on part. I tried a lot to power on the phone but I can't just seem to power it on with the power on button. Is there any way to fix this or should I just buy a new phone?
Did you ever figure out what was wrong with it? I'm having the same problem
@@CarlosCastillo-jl3gd Did you guys check your power cords make sure they are connected completely
After months of experience, the power buttons on the A12 and A13 suck and will just fail randomly. Might be a small tear in the cable and won't work anymore.
Unfortunately I cant get the screen loose with just the pick! also tried with the razor but mine is too weak to put pressure to 'crack 'it open as it looks in the video and i kinda cut my hands now xd. any tips?
Use hairdryer to hotten the glue
Why there is a charging port integrated with the screen? Is the wireless charging coil in the screen itself?🤔
One less separate screen connection, 2 plugs vs 3 I guess. Maybe 2/3 the cost on the $1 of parts to produce now lol
@@RealWorldReview The way the screen should be made is that replacing it shall not make one disassemble the whole phone. In my case I followed the video from Mike at gocellphonerepair to replace my broken Galaxy J7 Perx display and it was just scrapping the old one from the front and disconnecting one cable, all without touching a single screw.
That’s why I like pixels lol the Pixel 4A follow that idea, some with 1 or 2 screws, some without lol
Can the on/off power Button be changed?
Do you need glue or can I use tape?
Use glue
I recently replaced charging port on this model and it seems to go into a boot loop when you lock the phone. Any ideas?
How did you get the back cover off so easy? I got one side started with a plastic pick but I can't get around the corner to get the top or bottom loose.
hello what is the exact model for the 5g screen
A136
Hey Quick question.I'm trying to figure out if I need to replace my battery or my screen.I dropped my phone and I won't turn on.Even when I tried to charge it, leaving my charger and press the power.Nothing's working.So should I try replacing the screen or the battery?
Also there are no cracks on the screen at all
Can replace motherboard with a13 4g in 5g model???
No. Bunch of different parts (also the 4g and 5g have different cameras and the amount of cameras)
After i replaced my lcd there is a blue light appearing on the screen everytime i used it and the keyboard im having a hard time 2 press the letters. What seems 2 be the problem?
Sounds like a defective screen
would a blow dryer work?
Maybe? Heat guns are like $15-$20
My samsung galaxy A13 screen just spoilt. How do i replace it.
Bro my power button is not working and i opened the back and the thread is not broken.what is the problem?😢
Bro because the top of my phone keeps crashing randomly like I dropped it 1 day under the car on a rock and there was a Crack in the middle but the top just keep cracking so I'm keeping this video unless it brakes
As I got to the step to remove the battery, it began going "Pffffffffffftt!" Smoke everywhere, then flames shot out of I guess the battery. I had been working on a wooden desk, quickly knocked to the floor, where it then set a rug on fire. I have no idea what the issue was, but this Samsung battery started a large fire, burned holes in a rug, stunk up my house, luckily I was right near it when this happened. No clue why. Threw the smoking phone & battery out my door onto the wet lawn.
Can i install Samsung A13 5g lcd screen on samsung A13 4g??
No. Different specs but similar process
@@RealWorldReview thank you sir 🙏
Can a 5g screen fit a 4g screen
awesome , u got a sub !
Tysm bro
may God bless you bro
Great video
thanks for the help
Finding something pressuring the screen after gluing it is killing me 🤕
Ok I AM NOT REPAIRING THIS EWASTE
Should be called E series, cause making the A series really is e-waste after a year or two.
Hello there. I hope you can help. My son (15) replaced my broken A13 4g screen and the frame it is housed in. The screen works but is really quite dark and dosent change with my brightness slider. Can you help us figure out what went wrong? thank you
Just needs a new screen. Make sure to get the A13 4G screen if it’s not the 5G model (A135, not the A136)
I need this done my phone is fucked
Tnkx ❤
Thanks sir i didnt have to toss my phon away
do NOT use regular glue make sure its the right one
What even is regular glue? Elmers? lol
Phone was working fine for a few days but I messed up using household liquid glue, didn't consider it would heat up and melt over time and stop working. It made the display layers split from each other not sure if a new display will fix the issue, will see.@@RealWorldReview
The video is very nice though. I just wasn't aware of that fact, sucks that glue isn't included in the repair kit