Could this be the BEST ALUMINUM TIG WELDING MACHINE for the money? - YesWelder TIG 250P AC-DC Welder

Поділитися
Вставка
  • Опубліковано 3 жов 2024

КОМЕНТАРІ • 261

  • @DIYHomesteadProjectsDIYHP10
    @DIYHomesteadProjectsDIYHP10  3 роки тому +1

    ​YesWelder website for products and info - yeswelder.com/?ref=DIY%20Home...
    YesWelder TIG 250P AC-DC - yeswelder.com/products/tig250p-acdc?ref=DIY%20Homestead%20Projects%20k_v1e2l-azd
    You may also be interested in this helmet - Yeswelder LYG M800H Welding Helmet Review - Including Actual Welding Arc Shots with the LYG M800H - ua-cam.com/video/WbPcrkm0JY4/v-deo.html
    YesWelder LYG M800H Welding Helmet - yeswelder.com/products/auto-darkening-welding-helmet-m800hp?ref=DIY%20Homestead%20Projects%20k_v1e2l-azd

  • @legionlonge6677
    @legionlonge6677 3 роки тому +12

    its always the best machine for the money when its free. mate

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Sure it is but I like it so much I purchased a different machine from YesWelder that wasn't free and I like it too.

    • @KWW0321
      @KWW0321 3 роки тому

      Wisdom

    • @Gw0wvl
      @Gw0wvl 2 роки тому

      Exactly 👍

    • @oneangrycanadian6205
      @oneangrycanadian6205 2 роки тому +2

      Ya but buy one you’ll see beleive me

  • @chrislarsen3009
    @chrislarsen3009 3 роки тому +3

    I got the machine!!! It’s rad. I am really stoked on it. I am a total beginner and ran my first beads of silicon bronze and stainless steel. I have only welded three times and only once with my 250p. The other two times was with a Miller and I know that millers are good but mine is better. Smoother. Tomorrow I am going to work with steel for the very first time!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      That is awesome Chris! It's a great machine and loaded with features. Enjoy your welding adventure!

  • @carmonkeysales9490
    @carmonkeysales9490 3 роки тому +2

    I got the welder, hood, gage and some rods. Thanks for your help now I am going to get the plasma cutter I gave you a thumb up

  • @carmonkeysales9490
    @carmonkeysales9490 3 роки тому +2

    I got the welder, hood, gage and some rods. Thanks for your help now I am going to get the plasma cutter I gave you a thumb up

  • @jennBourne
    @jennBourne 3 роки тому +3

    I've seen them advertised and was wondering about them. Thanks for the video

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      No problem 👍 So far it's been a nice machine especially for the money at the sale price. The Black Friday sale for 20% off ends Nov 29th 2020 just incase you are thinking about getting one.
      yeswelder.com/?ref=DIY%20Homestead%20Projects%20k_v1e2l-azd

  • @arias808
    @arias808 2 роки тому +1

    Sir you just solved a question I had!!! Thanks your videos r detailed and easy to watch again thank you!!

  • @TheRealJerseyJoe
    @TheRealJerseyJoe 3 роки тому +2

    This machine certainly seems like an outstanding value for money.... Impressive ! Thanks for the heads-up Bruce :-)

  • @j.oakman448
    @j.oakman448 3 роки тому +5

    Great video.ive been looking into buying a acdc tig in the budget friendly price range.thanks

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Thanks and you are welcome! YesWelder is having a good "Black Friday Sale" over the next few days. Here is a link to a short video I made with the sale details if you are interested.
      ua-cam.com/video/4pOqRSKdxd0/v-deo.html

  • @dart451kad
    @dart451kad Рік тому +1

    Noticed something today with my welder Bruce. Sometimes, for some unknown reason, my welds get weird, too much heat, they spread out. I have discovered that sometimes the Foot pedal selection light does not stay lit...and it doesn't matter how much you lessen the foot pedal. You have to reset the foot pedal for a few seconds till the light comes back on. I wish there was a way around this! At least I now know where to look first!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  Рік тому

      That is interesting Keith. I haven't experienced that myself and wonder why yours is doing that. Like you said at least you know were to look and how to reset it.

  • @JeffinTD
    @JeffinTD 3 роки тому +2

    Seems to have a good range of settings, ok user interface, and looks to have nice arc. It will be an outstanding value if it holds up.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      So far six months with quite a bit of use and no issues. If it continues I think it's the best value out there comparing price, features and performance. I'm really enjoying the machine!

    • @JeffinTD
      @JeffinTD 3 роки тому +1

      Nice! I wish they would offer a mig, tig, stick multiprocess in ac/dc.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Yes, that would be a nice machine for sure.

    • @JeffinTD
      @JeffinTD 3 роки тому +1

      Yeah. Right now Millermatic 220, Esab Rebel and Everlast are it for ac/dc multi process, none of which are budget machines. I suspect there are a lot of folks in my boat- limited space for multiple machines but wanting Tig aluminum. Ordered the Miller, but would have been happy to spend less.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      For sure! I would like to try a Miller, Esab or Everlast but I just can't justify spending that kind of money on a machine. This is all just a hobby for me so staying in the "affordable market" is my ticket. If any of those companies wanted to send me a machine to do a comparison video, I certainly wouldn't turn it down. 😀

  • @toddsanford7757
    @toddsanford7757 2 місяці тому +1

    can you make a video of you stick welding with this 250P? i have one and don't know how to use it very well

  • @tomspecht4733
    @tomspecht4733 3 роки тому +4

    The real question is how does it compare to the welder you have in the background. That Primeweld Tig225X.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      The two machines are quite comparable. Personally I like the YesWelder better than the PrimeWeld for the following reasons. The YesWelder is much lighter and much smaller. I like the low amperage arc on the YesWelder better than the PW machine. The YesWelder arc is more stable and just a smoother arc especially at low amperage. I prefer the digital user interface of the YesWelder machine over all the knobs and pots style of the PW machine. This really shines with pulse mode settings or settings such as AC balance. A lot of people really like the CK17 and super flex hose on the PW 225 and I do as well but that is only a 150 amp set up on a 225 amp machine. That's why a lot of guys are spending a lot more money and upgrading to a water cooler and water cooled torch for the PW 225 machine. The YesWelder comes with a 200+ amp size 26 torch so a guy can get full use of the machine's capabilities without having to spend more on upgrades. One of the nicest features on the YesWelder machine is it has a temperature controlled cooling fan. That is a great feature for someone like myself who likes to make YT videos and not have the loud fans running constantly in the background. Some may not care if they are in a noisy workshop anyhow it may not matter. The YesWelder is a minimum of $75 cheaper than the PW and often more than that due to YesWelders frequent specials, discounts and coupons. At the time of this writing you can pick up a YesWelder TIG 250P for $600 US Shipped. (that's a steal for a machine with these features IMO) One thing I will give PW is the 3 year warranty where YesWelder only offers a 1 year but other than that, I would prefer owning the YesWelder TIG 250P over the PW 225X machine. Both machines are amazing machines for a sub 1K price range. YesWelder TIG 250P - yeswelder.com/products/tig250p-acdc?ref=DIYHP10%25

    • @YT-User1013
      @YT-User1013 2 роки тому +1

      My same thoughts and he has answered this question really well.

  • @tylershimek6167
    @tylershimek6167 3 роки тому +3

    This was a great review! I’m looking for an affordable ACDC welder for aluminum! I think this will be perfect

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Thank you Tyler! I'm sure you would really like this machine. I really like the machine myself and it does real nice on AC for aluminum IMO. 👍

    • @tylershimek6167
      @tylershimek6167 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 subscribed for more awesome content!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Welcome aboard and thank you Tyler!

  • @billarroo1
    @billarroo1 3 роки тому +2

    NICE welder, nice welding, I have a Dynasty DX 200 Miller, YES welder seems to weld Great, 😃😃😃 Thanks

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I'm amazed how capable this machine is considering it's size, weight and price! I don't think it can be beat as far as value for the money. 👍

  • @williamvaughan1218
    @williamvaughan1218 Рік тому +1

    Fyi the power connector is a nema 5-50 I believe.

  • @whattheydonttellu2423
    @whattheydonttellu2423 3 роки тому +3

    Wondering if you could comment on how the Yeswelder TIG250P really works with 6010 and 6011 rod? It's maybe the only inverter machine in this price range that says it can do that...but does it do it well?

  • @adamkenaio2033
    @adamkenaio2033 2 роки тому +1

    I bought this yes welder 250 p and I cannot have any consistency and I always lose my foot pedal function.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      That doesn't sound good. I recommend you get in contact with their customer service while it's under warranty so they can get your issues corrected.

  • @deankay4434
    @deankay4434 2 роки тому +1

    I am confused on the T2 & T4 setting, if I got the numbers correct. I am the owner of a commercial MIG since 1984 and it uses like 14” spools and made adaptor for small rolls. I am forced into an early retirement but after decades of fixing others vehicles mostly at dealers, I am on foot. My son gave up on a nice semi rust free C10 and then donated his Tahoe after a few seconds of black ice. I am sure you see where this is going!
    Working on every carb made, I want my EFI and Lordy, the aftermarket parts! Sheet metal fits like crap and worn out OEM dies and holding fixtures weld them oddly. I am looking now in May, 2022 only to find the TIG-250P AC/DC had a WP-17 torch, not WP-26, no foot box plus no regulator. Oh well, chips have the same bag, but shy 17 more potato chips than a year ago. Other than Money, was is the difference in the WP-26 and function of T-2/T-4 that was not touched on well enough for my thick skull? Thanks.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому +2

      The WP-17 is a 150amp torch and the WP-26 is a 200amp torch. 4T is a four touch of the button process. (1)One touch lights the arc, (2)let go of the button and it goes through the upslope to set amperage, (3)press the button again and it goes into downslope to the low amp setting, (4)let go of the button and the arc goes out.
      2T is a two touch process, (1)press the button and the torch lights, (2)release the button and the torch goes out.

    • @deankay4434
      @deankay4434 Рік тому

      @@DIYHomesteadProjectsDIYHP10 Thanks for the explanation from worn out horse in a pasture somewhere.

    • @deankay4434
      @deankay4434 Рік тому

      ASE Master Tech since 1978. My regards as it takes a long time to save up for the welder, accessories, consumables and I guess I need metal as it is sky high.
      I appreciate it, your video, your tutorial and the time is takes to edit the video.
      I have watched many videos on the YES welder but will never get one for free. 5 lumbar fusion, FRA, then 3 rounds of spinal cord stimulation then the device company & Dr walked away. So, not starting any video anytime soon since I can walk 20-40 feet with a cain. Buy it's ok, I haven't had a cell phone since 2008 as Raytheon let me go after rotator cuff after teaching in 13 colleges and holding 4hr tech seminars in 7 states. Someday I will be in my mid 60's but UA-cam is not in my cards.
      Sorry! Thanks for your help. Dean Kay

  • @impactodelsurenterprise2440
    @impactodelsurenterprise2440 2 роки тому

    One of the most interesting thing I've read on this machine is that it outputs squarewave currents. Wonder how true is that

  • @jstmag
    @jstmag 2 роки тому +1

    Great info! Much appreciated

  • @donmcpheephotography
    @donmcpheephotography 2 роки тому +3

    Great videos!!. So its been a year since you have answered questions about the Yes 250 vs the PW225. Now I beleive the PW now comes with the CK WW torch, an updated SSC pedal and power for a water cooler. So my question a year later how do you compare the 2?? Thank you so much,,,,
    Cheers

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому +1

      Thanks Don I appreciate that! The two machines are quite comparable but the PW225 has been in it's box in storage since I got the YesWelder TIG 250. I just don't have room for both of them in my shop at the same time. Personally I like the YesWelder better than the PrimeWeld for the following reasons. The YesWelder is much lighter and much smaller. I like the low amperage arc on the YesWelder better than the PW machine. The YesWelder arc is more stable and just a smoother arc especially at low amperage. I prefer the digital user interface of the YesWelder machine over all the knobs and pots style of the PW machine. This really shines with pulse mode settings or settings such as AC balance. A lot of people really like the CK17 and super flex hose on the PW 225 and I do as well but that is only a 150 amp set up on a 225 amp machine. That's why a lot of guys are spending a lot more money and upgrading to a water cooler and water cooled torch for the PW 225 machine. The YesWelder comes with a 200+ amp size 26 torch so a guy can get full use of the machine's capabilities without having to spend more on upgrades. One of the nicest features on the YesWelder machine is it has a temperature controlled cooling fan. That is a great feature for someone like myself who likes to make YT videos and not have the loud fans running constantly in the background. Some may not care if they are in a noisy workshop anyhow it may not matter. The YesWelder is a minimum of $75 cheaper than the PW and often more than that due to YesWelders frequent specials, discounts and coupons. At the time of this writing you can pick up a YesWelder TIG 250P for $600 US Shipped. (that's a steal for a machine with these features IMO) One thing I will give PW is the 3 year warranty where YesWelder only offers a 1 year but other than that, I would prefer owning the YesWelder TIG 250P over the PW 225X machine. YesWelder TIG 250P - yeswelder.com/products/tig250p-acdc?ref=DIYHP10%25

  • @NateKult
    @NateKult 2 роки тому +2

    Do you need to change from ground positive to ground negative when switching from dc to ac?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому +1

      No, when in DC you want DCEN and when you are in AC the polarity alternates between DCEN and DCEP automatically so no need to change the leads when switching between AC and DC TIG welding.

  • @dart451kad
    @dart451kad 3 роки тому +2

    Bruce, you have some of the clearest video of shaded tig welding...what do you use to get the great images?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +2

      Most of my arc shots are with a cannon m50. I also use an nd filter and experiment with various in camera settings to get the look I like. The trick is to get those close up shots without destroying the camera or melting the filter or lens. It requires quite a bit of trial and error. LOL

  • @bretshivers8352
    @bretshivers8352 Рік тому

    have you seen the newer 250p and 200p? i wonder how they are compared to this model? i would guess the 200p is 200 amp oposed to 250 amp, wondering how much of an advantage 50 more amps would be for the happy home owner?

  • @johnsutter1497
    @johnsutter1497 3 роки тому +2

    Have you ever used a everlast welder?

  • @garymarklein4550
    @garymarklein4550 3 роки тому +1

    I'd like to learn before I buy one sweet machine for small fabrication work

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      This would be a great machine to learn on and take you well into small fabrication work all in one machine. IMO

  • @TerrenceLP
    @TerrenceLP 3 роки тому +2

    I'm going to hit you up when I'm in co, you deserve a beer 🍻

  • @TikiToyLabs
    @TikiToyLabs 3 роки тому +2

    newbie question but does it weld stainless or sheet metal?

  • @charlesbratten3293
    @charlesbratten3293 3 роки тому +1

    I bought one of these machines at the end of Nov 30, 2020 using my credit card @ 20% off. Got it for $600.00, then on Dec 5 2020 my credit card was hit for $99 more, so watch your card's history when you by from this company. I had not bought any items, before or after. Someone there made that extra charge!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Sorry to hear this happened to you. I've heard about a lot of fraud happening out there these days. I hope you get it resolved.

  • @chrismitchell45
    @chrismitchell45 3 роки тому +2

    Color me impressed! Nice bead! What did you have the hood set to shade wise?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Thanks Chris! It's been a little while but I'm usually around 10 to 11 on the shade while welding at 125 amps or so.

    • @chrismitchell45
      @chrismitchell45 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 I scored a Klutch MP200iDV multiprocess welder that has Mig gas and flux core, stick, DC TIG and a spool gun for $300! The more I see people Tig welding the more I want to try it. Which means I’ll have to convince the wife I need a pure argon bottle, a couple weeks after getting a C25 bottle lol. Would you say it’s easier or more difficult to see the puddle with Tig or Mig? Which process do you prefer more? Tig seems to do everything well at a 1/4” and below.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      I think it's easier to see the puddle with TIG. I prefer TIG because it's so clean and looks good if it's done right.

  • @southboundoft
    @southboundoft 3 роки тому +3

    I currently have a miller econotig. I'm new to tig welding so I know very little. Would this welder be better than what I have?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I'm fairly new to TIG welding also. I don't know much at all about the Miller Econotig machine but I think it's a transformer machine. (I'm not positive about that.) The answer to your question really depends on what you intend to do with your machine. I would think the Econotig would be a good machine to learn on. As your skills advance, you may desire some "inverter" TIG welding features that an older transformer machine doesn't offer. The YesWelder TIG inverter offers pretty much all the advanced TIG features most people want such as High Frequency start, TIG pulse, gas pre flow and post flow control, spot timer, digital interface as well as a small size and light weight. It's also capable of welding thicker metals than the Econotig because it has 100amps more available power. You'll have decide which welder is better for you and what your intended goals are with your TIG welding. Hope this helps a little.

  • @Mroswaldo16
    @Mroswaldo16 3 роки тому +2

    Honest opinion, is it really good for someone new that wants to start welding?
    I have a flux core harbor freught & i like it
    Want an tig aluminum welder to start learning but dont want something that wont last.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Completely understandable Oswaldo I feel exactly the same. I'm coming up on 1 year with this machine and so far no issues at all. The machine I received for demonstrations in my videos was also a used / returned machine. So far I'm very happy with the machine and I have used it pretty much every week over the past year. I think it's a solid machine and a good value. Good luck to you with your purchase decision and welding adventures.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      PS: If you decide to buy one now is a great time. YesWelder is running a 20% off at the time of this comment. That is the best discount I've seen from YesWelder. They are now also offering the TIG 250P with and without the foot pedal. This is something new they have started doing. Make sure you order with the pedal if you are wanting one. It does not come with one unless you specify that when choosing the machine I believe it's a $50 difference in price. Not trying to pressure you but I just wanted to let you know if you didn't already. yeswelder.com/products/tig250p-acdc?ref=DIYHP10%25

    • @Mroswaldo16
      @Mroswaldo16 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 yes, theirs a good deal RN, that whay im here on youtube watching videos.
      Wonder how the warranty is. Ive read bad on them. But i wont be able.to use this mechine yet, until i add a 220v to the garage & get gas tank.
      Btw what gas should i use??

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      YesWelder has a good 1 year warranty. If you contact them with an issue and follow the instructions they give for trouble shooting so they can be confident you actually have a faulty machine. They will either refund your money or send you a new machine. They may even have you remove the cover and test a few things and they are always going to want a video of the test they ask you to do so they can see the result of the test. Remember this is a company based in China and not the US so they handle this process a little differently than what most US based companies do. All they need is proof that the machine is faulty and they will make it right but you have to be willing to send video and do a little testing if you have an issue. If you are willing to work with that they will take care of you in my experience.
      You are going to need 100% Argon for TIG.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I just realized I never really answered your first question. I am a fairly new TIG welder myself. I only had a few months of experience when I received this machine. I think the user interface is pretty nice for a beginner and learning all the controls came fairly quickly for me. I believe, having the foot pedal, pre and post flow control and high frequency start have all helped speed up the learning process. I just recently used a machine with lift start and manual gas control and it seemed to me like that style would have been a little tougher to learn with. Also as you learn and grow with your TIG welding, this machine will pretty much do it all including aluminum right out of the box. Sorry I somehow overlooked your question but I hope this helps. :)

  • @332ARA
    @332ARA 2 роки тому +1

    It's 4/15/2022. Warranty is now out. How is it holding up? How much usage?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      It's holding up well. I have not had a single issue with the welder since I've owned it. I have used it weekly on my home projects over the past year and a half. I highly recommend this machine for the home shop and hobby welder such as myself. If it stops working, I will replace it with the same machine.

  • @antonioferrer9431
    @antonioferrer9431 3 роки тому +2

    Awesome welds like you said for a beginners 👍🏻 , will it Tig 1/4 aluminum?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I haven't tried it but it should have the amperage to TIG 1/4" Aluminum.

    • @DCweldingAndArt
      @DCweldingAndArt 3 роки тому +2

      Yea it will. If it goes over 200amps, it will easily. 200+Amps really just gets you started, heats the part up, if u look at your welder mid weld on .25" you'll typically see anywhere from 150-190amps after the part has heat in it. That's why they say "a little preheat goes along way." Cuz I've welded 1" thick aluminum to .25" pipe, with 245amps, with a little 200°F preheat. 350amp machines are to increase productivity and efficiency really. Helium mix or Stargon AL are also great methods to up your aluminum game

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Thanks for the info Derrick! 👍

  • @garypostell5268
    @garypostell5268 3 роки тому +1

    Imported? What’s the thickness max? Duty cycle?

  • @garypostell5268
    @garypostell5268 3 роки тому +1

    Now that you have a Primeweld so witch do you use more now !

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I had the Primeweld first. I received the YesWelder just about 1 year ago and I haven't plugged in the Primeweld since that day. I really like the YesWeder over the PW. The YesWelder has a much nicer and more user friendly interface. The digital control on the YesWelder makes it easier to fine tune and duplicate settings instead of just getting close. It's also much smaller and lighter. I also think the YesWelder has a smoother low amperage arc in comparison. Not to mention the temperature controlled fan. It doesn't constantly sound like a wind tunnel in the shop when the machine is turned on. And the YesWelder is a little cheaper. They run great sales quite often. I've never seen a PW sale on any of their machines. I like the YesWelder machines better!

  • @kenken-sr2vq
    @kenken-sr2vq 3 роки тому +1

    Are you going to do any video reviews on the YESWELDER ARC PRO 165DS 110-220V and the Arc205. I hear the amp ratings are not true as advertised.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Not that I know of Ken. I just wait for YesWelder to offer a machine to review and I haven't had any offers to review any of the machines you mentioned.

  • @danielamella4819
    @danielamella4819 Рік тому

    Hola! Tengo esa maquina pero el gas pasa directo, sabe que puede pasar ? Ayuda por favor!!

  • @kirkblee5853
    @kirkblee5853 2 роки тому +1

    Stupid question, can you also tig/stick weld mild steel with this?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      Yes Kirk, you can. I have made many videos using this machine to do just that. I'll link that video playlist here if you are interested in seeing some of what you are asking about. ua-cam.com/play/PLC_QVs9y_q3sjQ5rGLAl2CK4UgPmsj0zc.html

  • @stevecarlisle3323
    @stevecarlisle3323 Рік тому

    Have you been useing your YesWelder helmets with your tig welder.?

  • @dart451kad
    @dart451kad 2 роки тому +1

    Bruce, you ever try 1/16" tungsten to weld aluminum cans together? Ordered some Blue...will give it a go in a few days...

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      Keith, I do have some 1/16 tungsten but I haven’t tried it yet. I’m curious to know how it works for you.

    • @dart451kad
      @dart451kad 2 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Tried the 1/16 blue tungsten today. Mixed results. At least I'm not burning through as much. I've found about 22 amps, 35 cleaning, 250 hz freq., 60 hz wouldn't work at all. Certainly can't wait to pool and go! It takes a lot of filler build up to get it to tack to the cans. Gonna keep working on it until I can get better results and send you some pics...

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      Sounds like you are making progress. Now you're making me think I need to try it again. LOL I'm looking forward to seeing some pics.

    • @dart451kad
      @dart451kad 2 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Well, a little setback! Didn't realize there were different size gas lenses! I was using a 1/8" gas lens with my 1/16" tungsten. The arc would wander and create holes even when I wasn't pointed toward the side the holes showed up! I now have a 1/16" gas lens...we'll see if there is a difference...lol

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      LOL, I'll bet you see a difference now.

  • @markashlock9017
    @markashlock9017 3 роки тому +2

    Good vid Bruce. So do you like this better than your PrimeWeld?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Thanks Mark! Boy, that's a good question. I do like the size and weight of the YesWelder better than the Prime Weld. I'm still familiarizing with it but I think I like the YesWelder user interface better as well. The Prime Weld comes with a better torch, torch lead and foot pedal though. The YesWelder didn't come with a regulator but the Prime Weld does. It's hard to make a call which one I like better because they both weld really nicely. It's rare to non existent to see a break in the Prime Weld price because they can't keep them in stock. At the moment with the YesWelder end of year sale I think it's a "hard to beat" deal at the moment. At regular price it's a real close call as to which one I like better. I think they are both real capable welders for the cost.

    • @Elieko
      @Elieko 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 did you get the primeweld for free as well?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      No, I purchased the PrimeWeld with my own money at full price.

  • @yep.yep.yep.000
    @yep.yep.yep.000 3 роки тому +2

    Hi brother, between the prime tig welder and the yeswelder tig 250. Which do you personally like more?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I've been asked that question quite a bit lately and it's a tough one to answer. I like and dislike things about them both :) I would really like to have the best of both combined and that would be my ultimate machine but that is mostly personal preference. They both have the same features and perform about the same as far as I can tell. I really like using either one to be honest. I have a limited budget for my welding hobby so with the 20% OFF sale, right now I'd say the YesWelder would be my choice. I could use the $170 difference to buy other things such as welding rod, Argon, tungsten, weld metal etc. I say $170 difference because you'll have to buy a regulator for about $30 to use the YesWelder. The Prime Weld comes with a regulator. Hope this helps you out a little. That's a tough question to answer.

    • @yep.yep.yep.000
      @yep.yep.yep.000 3 роки тому +1

      That makes sense. Thank you very much for the reply!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      You're welcome Steven!

  • @WetSpinners
    @WetSpinners 3 роки тому +1

    So do you like it better than the primeweld?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Yes, I like most things about the YesWelder better than the primeweld. Size, weight, temp controlled fan, digital interface with only one knob and price. I do like the primeweld but the YesWelder fits my shop and needs better in most respects.

  • @videostellall
    @videostellall 3 роки тому +1

    I just ordered one with the regulator for $667.. The honey app took off 15% ish...

  • @dart451kad
    @dart451kad 2 роки тому +1

    Bruce, can you tell me what you have for wire gauge to run your YesWelder TIG-250P on? In the manual it shows 30 AMP peak input...wondering if I have a problem running 12 gauge wire...

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      Keith, most of the time I am running the YesWelder TIG-250P on a 240V 30 amp circuit. The circuit is using 10 gauge wiring from the outlet to the breaker box. (I have never tripped a breaker on this circuit using this welder) When I run it on 120V I'm using a 20 amp circuit with 12 gauge wire.

    • @dart451kad
      @dart451kad 2 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Thanks Bruce...I probably have a 50ft line of 12 gauge so I think I'm pushing the limits. I too don't blow any breakers but I'm thinking a more dedicated 10 or 8 gauge wire might help...

  • @danielebreda8704
    @danielebreda8704 Рік тому

    Ciao mi chiamo Daniele Breda. O appena aquistato questa saldatrice perché avevo visto un video e per me e veramente valida la sto aspettando dovrebe arrivare per la metà di settembre io stavo cercando proprio un tig che saldase aluminio anche se per me e la prima volta pero ero molto indeciso su tutte quelle che avevo visto questa mi sembrava la migliore adesso che o visto il tuo video mi sembra molto buona mi sono iscritto al tuo canale e ti o messo un police in su perché sei stato molto professionale nel spiegare spero tu meta altri video su questa saldatrice, devo ancora prendere il pedale e la maschera se tu mi puoi consigliare sarei interessato. E poi vorei sapere il tipo di Gass che mi serve per saldare aluminio e il tungsteno sempre per alluminio io devo saldare carter motore o cilindri sempre per moto. Ti ringrazio se puoi aiutarmi ❤

  • @intertwined1813
    @intertwined1813 3 роки тому +1

    @DIY Homestead Projects what size is the tig torch connector. I have the tig 205 ds an it came with the same torch. It’s far too bulky an I would like to get a ck torch to replace it. Just don’t know the connection size

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Sorry but I don't know what size the connector is. I wish I did though. I suppose if you were to email YesWelder they might be able to tell you.

  • @laraza49507
    @laraza49507 3 роки тому +1

    It's 120 v or 220 v?

  • @JB_Machine
    @JB_Machine 3 роки тому +1

    Is it only good for aluminum? How about some stainless

  • @ralfschmerler3170
    @ralfschmerler3170 3 роки тому +1

    Why i cant hear any sound of fan/ventilation in this video. Does the YW TIG 250P AC-DC has fan on demand/temperature regulated cooling ventilater?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Yes Ralf, the YesWelder TIG 250P AC-DC machine has an on demand fan controlled by a temperature sensor and it is a nice feature.

    • @ralfschmerler3170
      @ralfschmerler3170 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Where can i buy the TIG250P AC-DC? I'm from Germany.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      You can find the machine here at the YesWelder website. (link below) Sorry but I don't know if they ship to Germany. If they do, you can use the code DIYHP10% at checkout and you will receive 10% off your order.
      yeswelder.com/?ref=DIY%20Homestead%20Projects%2010%25%20OFF
      If they don't ship to Germany, you may be able to find the machine on Amazon here - amzn.to/3rYLkmi
      I hope this helps you out Ralf.

    • @ralfschmerler3170
      @ralfschmerler3170 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 thank you very much! I will try to order. Lets see if the can deliver to Germany.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I'm curious to find out as well for future inquiries. I hope it works out for you!

  • @kricketscreations4887
    @kricketscreations4887 3 роки тому +1

    So what u think what u like more the primeweld or the yeswelder ??

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      That's a good question Keith. I do like the size and weight of the YesWelder better than the Prime Weld. I'm still familiarizing with it but I think I like the YesWelder user interface better as well. The Prime Weld comes with a better torch, torch lead and foot pedal though. The YesWelder didn't come with a regulator but the Prime Weld does. It's hard to make a call which one I like better because they both weld really nicely. It's rare to non existent to see a break in the Prime Weld price because they can't keep them in stock. At the moment with the YesWelder sale I think it's a "hard to beat" deal at the moment. At regular price it's a real close call as to which one I like better. I think they are both real capable welders for the cost.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I also really like the YesWelder fan. It's temperature sensitive and doesn't run all the time. When it does run, it is much quieter than the PrimeWeld fans and it doesn't run very long before it shuts off again.

  • @rainsrapidly
    @rainsrapidly 3 роки тому +1

    I just bought the welder but i have NO idea what wattage i need in a gas generator 😭 please help

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Sorry I can't help you there, I have never used it with a gas generator. Maybe someone who has experience with that will chime in on this comment.

  • @JoseHernandez-uf5we
    @JoseHernandez-uf5we 3 роки тому +1

    Can plug 125amperes

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      240V only on the TIG 250P machine. The YesWelder TIG-205DS is dual voltage but DC only ( (120/240) Here is a link for if you want to check it out. yeswelder.com/products/welder-tig205ds?ref=DIYHP10%25

  • @johnsutter1497
    @johnsutter1497 3 роки тому +1

    Is it dual voltage ?

  • @oneanon
    @oneanon 3 роки тому +1

    What do you think of the yeswelder 200 amp stick welder.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Are you referring to the "Stick Welding Machine ARC Welder 205A"? Sorry but I don't have any experience with that machine. I would venture to guess that for the $135 and being a dual voltage stick machine, it looks like a descent machine. I don't care for the YesWelder electrode holder but it does work fine. Harbor Freight sells a nice one for about $15 and they are easy to replace.

    • @oneanon
      @oneanon 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Thanks for your Quick response and yes it is a stick welder and I am new in welding never done before.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      You are welcome! I think you will probably like that welder. I think it's a good price for a 200 amp stick machine. A big plus is the dual voltage capability. They also cary a 3 year warranty from YesWelder. If you decide to purchase one you can get 10% off using my discount code DIYHP10% during the check out process. Good luck to you and happy welding if you decide to get into stick welding!

  • @OneCupOfCoffee204
    @OneCupOfCoffee204 3 роки тому +1

    Where is this welder made???????

  • @victortoledo6101
    @victortoledo6101 3 роки тому +1

    Do you think welder is capable of tig lift arc if i leave it in the stick position?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I don't know for sure but I doubt it. I don't think you would have any gas flow from the torch if the machine is in the stick position. It may strike an arc though and I suppose you could use a torch with a gas valve. Why would you want to do that when the machine has HF start and a gas solenoid?
      I did start a stick rod once with the foot pedal and High Frequency start just to see if it would do it and it did. That was in the TIG setting using a rod holder instead of a TIG torch.

    • @JB-NZ
      @JB-NZ 3 роки тому +1

      I asked them this and yes, if you use a Tig torch with valve (WP-17V-35), and have it in the stick position DCEN then you can do lift start

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Thanks for the info James B!

  • @el_conde_doku
    @el_conde_doku Рік тому +1

    for the money is ok

  • @jameskogan6401
    @jameskogan6401 3 роки тому +1

    How’s it do with 6010 1/8 inch stick electrodes

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I don't know James, I haven't tried any 6010 rods with this welder.

    • @jameskogan6401
      @jameskogan6401 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 what about 6011 or 7018

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I tried it with 1/8" 7018 and 6013 and it did well with both of those rods. The electrode holder is pretty cheap but it does work. Personally I would replace it with a better one and they aren't that expensive.

  • @garypostell5268
    @garypostell5268 3 роки тому +1

    Not bad!

  • @DCweldingAndArt
    @DCweldingAndArt 3 роки тому +1

    Thos machine looks/sounds better than the Everlast 210ext that I bought for twice the money lol...think about that

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Yes, I think this machine is going to be hard to beat for the money. So far I really like it. Thanks for your input!

  • @agri-lifeorganicfarm2466
    @agri-lifeorganicfarm2466 3 роки тому +1

    Does this machine stick weld AC/DC?

  • @AM-rz8uo
    @AM-rz8uo 3 роки тому +1

    You tried the 200 stick model ?

  • @terrylumpkin4129
    @terrylumpkin4129 3 роки тому +1

    How does it compare to your PrimeWeld?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      That's a good question Terry. I do like the size and weight of the YesWelder better than the Prime Weld. I'm still familiarizing with it but I think I like the YesWelder user interface better as well. The Prime Weld comes with a better torch, torch lead and foot pedal though. The YesWelder didn't come with a regulator but the Prime Weld does. It's hard to make a call which one I like better because they both weld really nicely. It's rare to non existent to see a break in the Prime Weld price because they can't keep them in stock. At the moment with the YesWelder end of year sale I think it's a "hard to beat" deal at the moment. At regular price it's a real close call as to which one I like better. I think they are both real capable welders for the cost.

    • @terrylumpkin4129
      @terrylumpkin4129 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 thanks, I plan to purchase a Tig by year end and trying to do as much research as possible before I pull the trigger. Look forward to more videos.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Nice! I've done a lot of research before I purchased an AC/DC TIG machine and in my opinion, the YesWelder and PrimeWeld are the top two machines to consider. These two machines have the best warranty out there in this price range and they are both real nice machines for the money in my opinion.

    • @terrylumpkin4129
      @terrylumpkin4129 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 the other welder I’ve looked into is the everlast 200DV. Any experience with them?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      No Terry, I have no experience with the Everlast machines but I did almost buy one. I see most people who have videos of them seem to really like them. I think they are a little more money than the PrimeWeld or YesWelder but I don't hear a lot of bad things about them.

  • @sonofthunder.
    @sonofthunder. 3 роки тому +1

    im really looking hard,the h.freight titanium 200 unlimited ,has constant fan,no foot pedal,i like this triggered torch, this may be my first tig welder ,...how much does a argon bottle mud sized go for approximately

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      I do the same thing Mark, it takes me days to make decisions like that and sometimes even weeks. LOL In my area I buy my argon through a local supply company. Not one of the big national companies but a small family owned business. I bought a medium size bottle (120cf) from them and it cost me $285. When it's empty I take it in and they give me full one for $61. I never have to worry about having the bottle certified or anything like that, they take care of all of that. The first bottle purchase and fill up was painful but the $61 to fill it isn't that bad. My first bottle last me 4 months. My second bottle last me two months and I'm now half way through my third. TIG welding is addictive but I do it on a budget and once you have that initial expense it's really not too expensive as a hobby. That really depends on what you use to practice on. I use the weldmetals.com coupons and I've made a trip or two to the local scrap yard to buy some real cheap metal to practice with. Good luck with your decision and let me know if I can help with any more questions. 👍

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      Are you wanting a multi process machine. Mig, TIG, Stick? You may already know this but Mig and TIG both require different gas. If you get a multi process machine and want to do both MIG and TIG. You will need to have two bottles of gas. One for MIG and different bottle for the TIG. Just thought I would mention that.

    • @sonofthunder.
      @sonofthunder. 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 yes ,im after a mid sized argon 100% BOTTLE,I HAVE the older chicago electric 170,with htp upgraded longer mig torch, 50ft power lead,and upgraded ground lead n clamp,w argon c02 mix,*smallbottle

    • @sonofthunder.
      @sonofthunder. 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 hey thanks yeah i recently got into beekeeping ,and its been a investment in gear,boxes,suits,smoker,im sure ive got a couple thousand now,...but its a good hobby,sweaty in summer,learned a ton,plus theres the reward of honey,it has risks too,thanks for the info,few months ago i ran 50a 230v so im ready,just need argon tank,

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      OK, I figured you already knew but I just wanted to make sure you were aware. Another fairly big difference between the YesWelder and the Titanium 200 unlimited is the Titanium has a manual valve for the gas. The YesWelder is controlled by an internal solenoid with both pre and post flow control. They both work but one is more convenient than the other.

  • @toycoma98
    @toycoma98 3 роки тому +1

    what size is the torch connection?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      That is a good question and I have wondered that myself. I measured the outer threads of the male connector on the machine and came up with .629" (5/8") or 16mm. I hope this helps you out.

    • @toycoma98
      @toycoma98 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Thank you. This is now available on amazon, i ordered one before its gone. I found a M16x1.5 to 3/8-24 adapter to use ck superflex on ebay. I was gonna get the weldpro tig200gd but they decided it was a good idea to raise the price by $40 on ebay, amazon, and main website.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      You could have saved 10% if you purchased the machine from YesWelder and used my code DIYHP10% at checkout. Anyhow, it's a nice machine I think and I hope it serves you as well as it has me. Take care!

    • @toycoma98
      @toycoma98 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 they cant ship to me from yeswelder direct. Amazon allows shipping to my location, i already have their mig 205ds. BTW, is the machine 220v only? what plug does it have? could it be plugged in 110v?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Oh, I understand now. The TIG 250P is 240V plug only. It comes with a 50A 240V style plug on the machine. (unfortunately no 110V on the TIG 250P machine)

  • @carmonkeysales9490
    @carmonkeysales9490 3 роки тому +1

    I click on buy it now with the code 20 and the price is 749, what happened

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      That doesn't sound right. I think I would send an email to customer service. I would also include your order number telling them what happened. Let them know you were trying to use the YESWELDER20 coupon code and they should be able to adjust the total for you.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Once you click on buy it now it should take you to your shopping cart page. On the right side of that page you should see a box that says "Gift card or discount code". Click in that box and type the word YESWELDER20 in caps then to the right click (apply). Once you complete that it should show a list with the original price followed by the discount and finally the final price of $600.00.

  • @dart451kad
    @dart451kad 2 роки тому +1

    Hey Bruce? Have you tried welding two aluminum soda cans together with your YesWelder AC/DC 250P welder yet? I've tried, failed miserably!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      I have and failed too. I have a few technique ideas that might make it successful that I haven't tried yet. When I try them out I'll probably make a video of it so you can check it out.

    • @dart451kad
      @dart451kad 2 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 I'm looking forward to what you come up with! Thought I messed up my machine! Wouldn't weld for crap...found out I turned the frequency down to nil instead of the amps...sits there and just buzzes...Had to use your settings here to figure out my mistake...you the man!

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      I'm glad you figured it out and are back up and welding Keith. I've made plenty of silly mistakes like that myself. LOL

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  2 роки тому

      Well, I tried and still unsuccessful. I tried turning down the AC balance to reduce the penetration and then tried lighting up the arc on the filler rod to prevent burn through on start up. I worked better but still a long way from what I would call successful. I guess I still need to practice more with the aluminum can trick. When you get it figured out let me know what the trick is. LOL

    • @dart451kad
      @dart451kad 2 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 LOL! Lately I've just been burning nice black holes in the aluminum cans. I had it turned down to 16 amps...didn't seem to matter...

  • @carmonkeysales9490
    @carmonkeysales9490 3 роки тому +1

    I click on buy it now with the code 20 and the price is 749, what happened

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      That doesn't sound right. I think I would send an email to customer service. I would also include your order number telling them what happened. Let them know you were trying to use the YESWELDER20 coupon code and they should be able to adjust the total for you.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Maybe I misunderstood you. Did you actually place the order or were you just trying to?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      Once you click on buy it now it should take you to your shopping cart page. On the right side of that page you should see a box that says "Gift card or discount code". Click in that box and type the word YESWELDER20 in caps then to the right click (apply). Once you complete that it should show a list with the original price followed by the discount and finally the final price of $600.00.

  • @weldh2o
    @weldh2o 3 роки тому +1

    How can I use different Tig torch and have the access to the same features as the original Tig torch?

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      By features are you referring to the finger switch? Just get a torch switch and zip tie it to your new torch. Maybe?

    • @weldh2o
      @weldh2o 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 I can't weld if I use a different Tig torch that is not connected to five pin connector

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I don't know the answer. I've only used the foot pedal with mine.

  • @carmonkeysales9490
    @carmonkeysales9490 3 роки тому +1

    Yesterday you said the code was yeswelder20 for tig 250P less than$700 now it's 15 percent black friday until the 29th

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      YesWelder web site says YESWELDER20 for 20% off right on the first page when you access the web site. It says the 20% off "Black Friday Sale" runs Nov. 24 through 29, 2020.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      If you select the TIG 250P and use the code YESWELDER20 it will show a $149.99 discount. That should make the machine total $600.

  • @TheCompanyofEagles
    @TheCompanyofEagles 3 роки тому +1

    I have been waiting for my order of this welder to be shipped for 4 weeks and the Communication and support has been as bad as it gets. They respond but avoid answering my questions. They have claimed it is in stock but can’t give me a ship date. I have been asking for 3 weeks when it will ship. I ask once a week. And get no answer accept asking if I want a refund. If I get a refund then they got a 4 week interest free loan.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      The web site is showing out of stock and deliveries by the end of June 2021. I hope you get your welder or refund soon. I saw a while back where someone posted a phone number on their facebook page. I don't know it off hand and I have never tried to call it so I can't say if it's a good number or not. Just thought I'd let you know I saw it on facebook.

    • @TheCompanyofEagles
      @TheCompanyofEagles 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 Thanks for this information. I checked for stock before I ordered on April 28th because it was stated that stock had arrived on April 25th and orders would ship in order received. I have been told that welder was in stock and ready to ship for 2 weeks and then nothing more about in stock. So my concern now is if my order is actually pulled from the April stock arrival and awaiting shipment or they ran out before my shipment and have not told me that my shipment will come from the June stock arrival. I will contact them again and ask.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому +1

      No problem, I hope they get you sorted out soon! I don't know anything about how the company handles orders but I noticed they seem to be out of stock on quite a few items on the website. They were running a spring sale so maybe they sold out of a lot of their products and are hopefully working hard to get caught up.

    • @TheCompanyofEagles
      @TheCompanyofEagles 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 They sent me a coupon but that doesn’t pay my bills. My clients don’t care if I get a future discount. I do like my helmet. They sent me spare parts kit for a welder I may never get.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      You'll get it and soon I hope. :)

  • @AutodidactEngineer
    @AutodidactEngineer 3 роки тому +1

    *Aluminium**

  • @elidari60
    @elidari60 3 роки тому

    Hi I was trying to get a hold of yes welder I have a couple questions I send them an email twice I tried to call the phone number that I found more than twice and left messages nobody answer how can you promote a company that you believe in their customer service it’s no good if that’s the way they operate I’m not a buyer I think you should stop promoting because people listen to you thanks

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I'm sorry you had that experience. I have had a good experience with their online customer service email listed on their web site. I really don't know anything about the internal workings of the company. I have had good results with the two YesWelder products I currently own and I find them to be a great value for the price.

  • @brandoncurry9387
    @brandoncurry9387 3 роки тому +1

    If only this machine did mig too.. I’m sure you can run a spool gun off it though

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      It would be the ultimate machine if it did MIG too. If you ran a spool gun off it you could have a spool gun with pulse. :)

  • @atvdave88
    @atvdave88 3 роки тому

    You need a water cooler with this otherwise the tig torch gets real hot

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I suppose if you are welding a lot that could be true. I haven't had any heat problems with the small projects I have been welding with it.

    • @atvdave88
      @atvdave88 3 роки тому +1

      @@DIYHomesteadProjectsDIYHP10 yea ive used a lot of machines with aircooled tig torches and they do get hot,water cooled is the best way to go unless your just doing a few small welds.

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  3 роки тому

      I agree with you, I'm going to have to give a water cooler a try in the near future. I have a feeling that once you use a water cooled torch, I'm not going to want to go back to air cooled. LOL Thanks for the info and tips!

  • @adamclark94
    @adamclark94 Рік тому

    Button sounds so plasticy

    • @DIYHomesteadProjectsDIYHP10
      @DIYHomesteadProjectsDIYHP10  Рік тому +1

      Sure welds nice!

    • @adamclark94
      @adamclark94 Рік тому +1

      @@DIYHomesteadProjectsDIYHP10 seems they put the money in what matters. Did alot of research and thinking about getting the 211 model. The double pulse option actually makes mig worth doing aluminum with. Will save alot of time over tig. And it still stick welds and flux core welds. One bad a** machine. Not sure on longevity but the internals on these are half and half name brand and off brand. However everything is solidly built even if some is offbrand. The ground is only 14 gauge though I would upgrade that to get better welds on dirty surfaces. They give you everything you need to be successful welding something though.

    • @adamclark94
      @adamclark94 Рік тому +1

      @@DIYHomesteadProjectsDIYHP10 and it's 110/220