Why would you need to disable the driver signature thing does not seem a little dangerous I mean shouldn't the device be plug After doing that disabling the driver signature installed without any problems whatsoever issues later on by doing that but thanks for your advice it was most helpful the blasted videos that come with these things are useless in the desk🤔🤔👍👍
hi! I've got a problem: When I plug in the usb-dmx , the computer not see the "uDMX", it see a "port3". I tried install the UDMX driver, install the UDMX driver whithout sign, but it isnt work. The USB-DMX still "port3" ... and it not work.. :(
I was able to setup my lights on Freestyler, but after turning off my laptop and disconnecting the usb, it can no longer recognize the lights. any idea?
Restart PC ... Other USB on PC ... Turn lights on / off. In Freestyler there is a function to turn off the light .... You have the lights in Freestyler turn on at 0% or 100%. I really can't think of anything anymore.
I don't want my moving Head (4 out of 6) to go back because it light up the wall. I want them to stay in the front only. Is there a way to bloc them all or only 4 out of 6 to go to some positions? Was a typo I meant block them at 180 degree.
Ahoj... Takže tohle je návod od 15 minuty jak si nastavit světla tak aby jeli "podle" hudby? něco jako auto mod s tím že si zvolím jaký efekty a pohyby mi to bude házet? :)
Hneď v 51 sekunde si neviem rady... ako náhle zvolím obnovenie a potom reštartovať tak mi reštartuje PC ale možnosti ako vám mi neukáže. Viete mi poradiť čo robím zle? V momente keď chcem deaktivovať popis ovládača musí byť DMX prevodník zapnutý v PC? Ďakujem,
to jestli je DMX zastrčeno je jedno. Zrovna teď jsem to zkusil na jiném PC bez DMX a jde to. Možná máte nějaké divné win. A nebo jste přihlášen jako administrátor? Bohužel s tím vám moc neporadím. To je spíš otázka na podporu výrobce PC ne po na podporu Microsoft. Já mám win 10....
How can we see the 3D preview in freestyler? And what's the driver to make it work properly I do not find it and rêve production, the builder of my cable, doesn't exist anymore
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Best Freestyler tutorial video in UA-cam !
:))))))))
Super video
Thanks for that. I was struggling with no-name chinese 4par lights..
Super video potřeboval bych poradit s naprogramovamim laser Derby
Your setup is much better! Thank you So much!!
Why would you need to disable the driver signature thing does not seem a little dangerous I mean shouldn't the device be plug
After doing that disabling the driver signature installed without any problems whatsoever issues later on by doing that but thanks for your advice it was most helpful the blasted videos that come with these things are useless in the desk🤔🤔👍👍
hi!
I've got a problem: When I plug in the usb-dmx , the computer not see the "uDMX", it see a "port3".
I tried install the UDMX driver, install the UDMX driver whithout sign, but it isnt work. The USB-DMX still "port3" ... and it not work.. :(
I was able to setup my lights on Freestyler, but after turning off my laptop and disconnecting the usb, it can no longer recognize the lights. any idea?
Did you save the settings?
Otherwise I don't know :(
@@cubivideoCUBIVIDEO yup i did, too bad i'm at dead end on solving this. anyway thanks man.
Restart PC ... Other USB on PC ... Turn lights on / off. In Freestyler there is a function to turn off the light .... You have the lights in Freestyler turn on at 0% or 100%. I really can't think of anything anymore.
Let s say I do have moving light. Is there a way to tell freestyler to do not allow them to go 360 degres but only 180 degres ?
I'm sorry, but I don't understand the question.
What is "degres"?
I don't want my moving Head (4 out of 6) to go back because it light up the wall. I want them to stay in the front only. Is there a way to bloc them all or only 4 out of 6 to go to some positions? Was a typo I meant block them at 180 degree.
I have no experience with this
What do you do if your lights are unbranded? What do you put in?
it doesn't matter. I also have unbranded
thank you for this
whats the use of the little disk?
It's not a disk but a DMX adapter
Ahoj... Takže tohle je návod od 15 minuty jak si nastavit světla tak aby jeli "podle" hudby? něco jako auto mod s tím že si zvolím jaký efekty a pohyby mi to bude házet? :)
mimo jiné taky.....
Hneď v 51 sekunde si neviem rady... ako náhle zvolím obnovenie a potom reštartovať tak mi reštartuje PC ale možnosti ako vám mi neukáže. Viete mi poradiť čo robím zle? V momente keď chcem deaktivovať popis ovládača musí byť DMX prevodník zapnutý v PC?
Ďakujem,
to jestli je DMX zastrčeno je jedno. Zrovna teď jsem to zkusil na jiném PC bez DMX a jde to. Možná máte nějaké divné win. A nebo jste přihlášen jako administrátor? Bohužel s tím vám moc neporadím. To je spíš otázka na podporu výrobce PC ne po na podporu Microsoft. Já mám win 10....
@@cubivideoCUBIVIDEO Ok, Ďakujem za ochotu. Som rád že sa našiel niekto kto sa podelí o svoje know how ohľadom freestilera s nami laikmi :)
@@temi4469 no jsem taky lajk:))
Can you please shear the usb dmx 512 filed I lost mine.
freestylerdmx.fbf ???
udmx are auto disconnect and auto connect after 5 or 6 minute
my udmx works fine, it doesn't disconnect
THANKS SIR
@@newbharatielectric7758 Great. And thank you
How can we see the 3D preview in freestyler? And what's the driver to make it work properly I do not find it and rêve production, the builder of my cable, doesn't exist anymore
it's hard then ....
Ho! And for the 3D preview?
I have no experience with this
ua-cam.com/video/JMTznsvXZ0c/v-deo.html
uDMX is only for home fun and it is not recommended to make any comercial show .
uDMX hasn't got a opto-isolation so it's no safe for computer