@UCqnaiVg1YHF2NjvR-w8lBAA dekhi Bhai mene aapki videos subscribe b kiya hai aapka channel ..Mera project hai abaqus mein aur muje new abaqus krna hai download kyunki old meinbahut problem aa RHA hai...
Ths video is quite educative.I have obtained vey useful information about Abacus.Can Abacus assist one to check on structural integrity of a building just before construction.
Could you do a video on analyzing moment curvature of a composite beam? It would be really helpfull to understand how to model the interface interaction between studs (shear connectors), steel and concrete.
I want to estimate the number of cycles/ stress intensity factors SIF and the corresponding crack extension rate to establish paris law for the given material under uniaxial loading. The sample has and edge crack (with symmetry boundary conditions) and a notch (hole) right to the crack edge. Load is 350N. Young’s modulus for PMMA (Acrylic) of 2.8 GPa (406.1 ksi), and a Poisson’s ratio of 0.34.
Hi TM, Thank you for the excellent ABACUS tutorials! Your explanations are really clear and beginner friendly. It would be great if you could make at least one more ABACUS tutorial about setting up an acoustic modelling from scratch. I know that Abacus can simulate acoustics, and also acoustic-structure interactions. The only problem is that I could not find any useful tutorial on UA-cam, or elsewhere about this. Thanks
Hi, does anybody know hot to adjust custom_v6 file for abaqus 2019 to apply the floating license? I have 3 port@ licenses to set and I put them under the flexnet server type with "serv1;serv2;serv3" pattern but abaqus notices only serv1
He is asking me the deformation values when calculating results of structural analysis like exponent and other deformation values... means it is saying that these values cant be zero in the error how u done without this values please tell i am stuck
What does student edition is restricted to 1,000 nodes. The nodes are just 320 but this pops up anytime i want to submit my job. Please, I need urgent help to turn in my graduate project.
Thank you for this beautiful and well-structured lecture. This training has taken me to a level in understanding Abaqus. However, l working on composite material, please can l be trained or received something like this to train myself?
can you explain how can i apply same load on five different points of a 100 mm long plate ? each load has to be applied after a gap of 30 seconds and each load has to be applied for about 15 sec
can anyone explain when the video explanation goes to "this thing pops out"? because it does the same on my laptop and I don't know where is to drag the pops up stuff
Hi, thanks for the comment. Are you referring to the phrase at 6:17 in the video? In my case the popup appeared on my second screen. So I just dragged it over onto my main screen.
Hey brother I have a couple of questions,please help me by answering those.......I am running a cracked abaqus software for just learning,going to buy an original one soon .My problem is that whenever I try to use gpgpu acceleration it says gpgpu token not available........what's the problem?........is there a way to get it working .Note:I am using GTX1050 3GB on my laptop.....(I know it's not "supported" but as it has CUDA cores it should work right?).Please ,please give me a solution,I desperately need it for my thesis work.
Hey! Great video! But I couldn't copy paste my data. My Excel says Excel cannot paste. And I tried to paste it else where, but the copy wasn't right :/ Expecting a reply!
Hi Thanks for the comment. No, the approximate size gives Abaqus an indication of the "drawing grid size". The actual dimensions of the beam is specified by drawing the beam (a rectangle in this case). It should be noted that Abaqus does not entertain units of any kind. The user must choose and keep track of all units
thank you for your help I want to make simulation for high performance concrete but i dont know what is the parameters that i need it to make simulation to HPC , Can you explain it to me ?
How can I get a rid of this worning? Please reply. Thank you very much The absolute zero temperature has not been specified for computing internal thermal energy using the absolute zero parameter on the *physical constants option. A default value of 0.0000 will be assumed. No valid radiation output requests have been generated. This may be because no valid cavities exist in the model.
Hi, thanks for the comment. That is a strange warning I've never seen before. It seems that Abaqus is attempting a thermal analysis of sort, did you maybe select CFD modelling as oppsed to a standard/explicit model?
@@TMsChannels Thanks a lot for your reply. I want to do the Transient Heat Transfer analysis. I am using ABAQUS for the first time. Unable to find out the options to get a rid of these warnings.
@@TMsChannels Getting one more warning...... Warning: Boundary conditions are shown in the local co-ordinate system, in which they were defined. Thank you
For Transient Heat Analysis on ABAQUS, in your STEP module select ‘Heat Transfer’ then select whether ‘Static’ or ‘Transient’ analysis, define your simulation time, move on to the INTERACTIONS module and define your boundary conditions such as ‘Conduction, Convection and/or Radiation’ and check the associated parameters for these conditions using available data from published experiments, also determine your initial temperature of the whole model. Move on to mesh and choose ‘HEAT TRANSFER’ elements and lastly define the Absolute Zero Value and the Boltzmann constant using model attributes, lastly submit the model for analysis and view results.
dear sir... when I tried the same example as which you have explained..... but I got the following error.... can you explain in brief how to sort out this problem...…. "The executable standard.exe aborted with system error code 1073741819. Please check the .dat, .msg, and .sta files for error messages if the files exist. If there are no error messages and you cannot resolve the problem, please run the command "abaqus job=support information=support" to report and save your system information. Use the same command to run Abaqus that you used when the problem occurred. Please contact your local Abaqus support office and send them the input file, the file support.log which you just created, the executable name, and the error code." waiting for your valuable reply.....
Sir, I would like a very important advise on the fact that my "Abaqus" has to be run on my laptop......and since it's getting old I am buying a new one.I would like to have your advise that is CPU( say 3.7 vs 4 Ghz) more important over storage( 516 SSD vs 1TB correspondingly).....for "Simulation".Please,I need an advice from an expert like you. PS:I don't have the option to use a desktop for some reason s so it has to be a laptop.THANKS IN ADVANCE. @ TM''sChannel.
Yes, ABAQUS is a CPU-heavy software and you can run projects off an external hard disk. Though I advise you to get a PC instead because cooling is much better and thus, higher performance.
This video brought everything about Abaqus to my desk.
very detailed vedio and almost everything was there for a starting tutorial. Thanks mate.
Thank you! You explain it step by step very clearly. Will study all your uploaded videos and looking forward for the next one! Thank you so much!
Thank you so much!! I could not have started Abaqus without this vdo.. Please do some more like this.
That is a really helpful video. Could you upload more videos. Such detailed videos on Abaqus are rare on youtube
hey sis can you help me in abaqus😔
@@abaqusfem ok bhai 👍
@UCqnaiVg1YHF2NjvR-w8lBAA dekhi Bhai mene aapki videos subscribe b kiya hai aapka channel ..Mera project hai abaqus mein aur muje new abaqus krna hai download kyunki old meinbahut problem aa RHA hai...
@@gaganui5041 for online training and projects in ABAQUS contact bindeshchouhan@gmail.com,
All problems in modelling and analysis contact me
@@abaqusfem Could please help me to know total number of nodes and elements in the meshed component ?
I appreciate you for creating such a good tutorial.
Thank you for making this video! It was extremely helpful in getting started with Abaqus!
Awesome content, my friend. Had put down ABAQUS for a few years and needed to jump back in. This video was really clutch for me. Cheers!
Thank u. This tutorial helped me very much.
Great video, thanks! Could follow still along on the 2023 version :)
Great Explanation.....keep on uploading more videos......it was very helpful 👍👍👍
Thank you very much for this video. Is super well explained and really helped with my dissertation
Ths video is quite educative.I have obtained vey useful information about Abacus.Can Abacus assist one to check on structural integrity of a building just before construction.
Well explained video.. good for beginners!! Thank u..
Excellent tutorial! Thanks for sharing!
Awesome video! thanks for sharing your knowledge
Could you do a video on analyzing moment curvature of a composite beam? It would be really helpfull to understand how to model the interface interaction between studs (shear connectors), steel and concrete.
This video was very helpful, your are absolutely awesome yourself bro 👍👍👍
really helpful for new students for introduction
Loved the video, thank you so much for the clear tutorial :D
That is a really helpful video thank u so much brooo
thank you for your contribution to society
I want to estimate the number of cycles/ stress intensity factors SIF and the corresponding crack extension rate to establish paris law for the given material under uniaxial loading. The sample has and edge crack (with symmetry boundary conditions) and a notch (hole) right to the crack edge. Load is 350N.
Young’s modulus for PMMA (Acrylic) of 2.8 GPa (406.1 ksi), and a Poisson’s ratio of 0.34.
Really great video ! Thank you for your help
Hey, do you need customized tutorial just for you? If you do, please Email at learnsharewithdp [at] gmail [dot] com.
Hi TM,
Thank you for the excellent ABACUS tutorials!
Your explanations are really clear and beginner friendly.
It would be great if you could make at least one more ABACUS tutorial about setting up an acoustic modelling from scratch. I know that Abacus can simulate acoustics, and also acoustic-structure interactions. The only problem is that I could not find any useful tutorial on UA-cam, or elsewhere about this.
Thanks
really good explanation
thanks for the lecture
Thanks! Very good details towards the end,
your video was wonderful.. thanks for that sir
What a great video! Thank you, fam!
THANK YOU. YOU HELPED ME LEARN SOMETHING
Really amazing tutorial. could you please share more videos on behalf of biomaterial.. Thank you So much
thank you for this very informative video
your video is awesome! thank you very much!
Awesome Tutorial
Thank you !! video is really helpful
Great intro tutorial.
Absolutely fantastic, thank you
I am a beginner. Infact it's my first time but i have learned a lot already
Thank you very much, very interesting !!
very helpful video. could you upload videos based on impact too? thankyou
thanx boss. It was really helpful
Hey, do you need customized tutorial just for you? If you do, please Email at learnsharewithdp [at] gmail [dot] com.
good explanation for abaqus beginners. If possible please share us any PDF materials and also many more videos on this CAE software sir....thank you.
Nice introductory video
Thanks for the video and explanation. Can I use ABAQUS for dynamic load? like simulating triaxial test for the soil?
Thank you very much! So helpful
Dude, thank you SO MUCH!
Glad I could help!
Very helpful, thank you.
Hello there! Want more videos like this. From the beginning. Also, I couldn't find 2,3,4,5 part of Abaqus
Hello, Thanks for this video...can you please upload a video on complex eigenvalue analysis
real helpful vdo... plz do upload more vdos....
Thank you for this lesson!
nice video it is very helpful
Really good video
Thank for the useful video
Hi, does anybody know hot to adjust custom_v6 file for abaqus 2019 to apply the floating license? I have 3 port@ licenses to set and I put them under the flexnet server type with "serv1;serv2;serv3" pattern but abaqus notices only serv1
thank you very much for the lecture
He is asking me the deformation values when calculating results of structural analysis like exponent and other deformation values... means it is saying that these values cant be zero in the error how u done without this values please tell i am stuck
This video is really helpful. Could you please upload some videos related to composite steel and concrete column.
thank you.
What does student edition is restricted to 1,000 nodes. The nodes are just 320 but this pops up anytime i want to submit my job. Please, I need urgent help to turn in my graduate project.
Very helpful, thank you. Like given!! And subscribed
Thank you for this beautiful and well-structured lecture. This training has taken me to a level in understanding Abaqus. However, l working on composite material, please can l be trained or received something like this to train myself?
Hey, do you need customized tutorial just for you? If you do, please Email at learnsharewithdp [at] gmail [dot] com.
Sir please upload some tutorial related to crushable foam.
Thanks a lot, very interesting
can you explain how can i apply same load on five different points of a 100 mm long plate ? each load has to be applied after a gap of 30 seconds and each load has to be applied for about 15 sec
AWESOME VIDEO
can anyone explain when the video explanation goes to "this thing pops out"? because it does the same on my laptop and I don't know where is to drag the pops up stuff
Hi, thanks for the comment. Are you referring to the phrase at 6:17 in the video? In my case the popup appeared on my second screen. So I just dragged it over onto my main screen.
alright understood@@TMsChannels
Hello
I try to simulate a coated substrate, can you help me?
so much interesting for beginners as me
Hey brother I have a couple of questions,please help me by answering those.......I am running a cracked abaqus software for just learning,going to buy an original one soon .My problem is that whenever I try to use gpgpu acceleration it says gpgpu token not available........what's the problem?........is there a way to get it working .Note:I am using GTX1050 3GB on my laptop.....(I know it's not "supported" but as it has CUDA cores it should work right?).Please ,please give me a solution,I desperately need it for my thesis work.
Hey! Great video! But I couldn't copy paste my data. My Excel says Excel cannot paste. And I tried to paste it else where, but the copy wasn't right :/ Expecting a reply!
Sir can you explain use of CSTATUS and CSTRESS
It's excelent! Thank you
can I simulate optical fiber by this program?
Can we get final analysis pdf report as same we get with ansys software
Really nice!
I have a question, how can we get the angular displacement?
Good video, thank you!
Well done man!
how would i add rebars to it if i wanted?
Hi, can you do a tutorial on RC beam/column wrapped by FRP sheets? Really glad if you do so . Thank you
do you make video about roller bearings?
You said your beam will be 3 meters however for approximate size you chose 10. Does that mean every 10 units of abaqus is equal to 3 meters?
Hi Thanks for the comment. No, the approximate size gives Abaqus an indication of the "drawing grid size". The actual dimensions of the beam is specified by drawing the beam (a rectangle in this case). It should be noted that Abaqus does not entertain units of any kind. The user must choose and keep track of all units
sir thanks ,please do a one video on dimensions making and units making
hiii friend can you upload more video for r.c. ssb and how apply frp plate.....
This was a nice introduction, thank you!
thank you for your help
I want to make simulation for high performance concrete but i dont know what is the parameters that i need it to make simulation to HPC , Can you explain it to me ?
for online training and projects in ABAQUS contact bindeshchouhan@gmail.com,
All problems in modelling and analysis contact me
Could pls model how to do column jacketing in abaqus
Bro..cmd saying denied...even I follow the same procedure..
deflection values in which form
How can I get a rid of this worning? Please reply. Thank you very much
The absolute zero temperature has not been specified for computing internal thermal energy using the absolute zero parameter on the *physical constants option. A default value of 0.0000 will be assumed.
No valid radiation output requests have been generated. This may be because no valid cavities exist in the model.
Hi, thanks for the comment. That is a strange warning I've never seen before. It seems that Abaqus is attempting a thermal analysis of sort, did you maybe select CFD modelling as oppsed to a standard/explicit model?
@@TMsChannels Thanks a lot for your reply. I want to do the Transient Heat Transfer analysis. I am using ABAQUS for the first time. Unable to find out the options to get a rid of these warnings.
@@TMsChannels Getting one more warning......
Warning: Boundary conditions are shown in the local co-ordinate system, in which they were defined.
Thank you
For Transient Heat Analysis on ABAQUS, in your STEP module select ‘Heat Transfer’ then select whether ‘Static’ or ‘Transient’ analysis, define your simulation time, move on to the INTERACTIONS module and define your boundary conditions such as ‘Conduction, Convection and/or Radiation’ and check the associated parameters for these conditions using available data from published experiments, also determine your initial temperature of the whole model. Move on to mesh and choose ‘HEAT TRANSFER’ elements and lastly define the Absolute Zero Value and the Boltzmann constant using model attributes, lastly submit the model for analysis and view results.
Can you help with pile soil interaction using abaqus?
Hi, to be honest I have never done interaction in abaqus. I believe you may be more successful with the abaqus documentation and published papers?
i didnt have parts.. idont know way...pleas help me?
Very useful.
Thank you very much it was really helpful ... May god have mercy on your parents
It means ... bless your parents
Good Job
how i make reinforced concrete beam column joint in abaqus ?
dear sir... when I tried the same example as which you have explained..... but I got the following error.... can you explain in brief how to sort out this problem...….
"The executable standard.exe aborted with system error code 1073741819. Please check the .dat, .msg, and .sta files for error messages if the files exist. If there are no error messages and you cannot resolve the problem, please run the command "abaqus job=support information=support" to report and save your system information. Use the same command to run Abaqus that you used when the problem occurred. Please contact your local Abaqus support office and send them the input file, the file support.log which you just created, the executable name, and the error code."
waiting for your valuable reply.....
Hi, thanks for the comment. Uhm... I am unsure what that error is and how to solve it. When does the error present itself?
Sir,
I would like a very important advise on the fact that my "Abaqus" has to be run on my laptop......and since it's getting old I am buying a new one.I would like to have your advise that is CPU( say 3.7 vs 4 Ghz) more important over storage( 516 SSD vs 1TB correspondingly).....for "Simulation".Please,I need an advice from an expert like you.
PS:I don't have the option to use a desktop for some reason
s so it has to be a laptop.THANKS IN ADVANCE. @
TM''sChannel.
Yes, ABAQUS is a CPU-heavy software and you can run projects off an external hard disk. Though I advise you to get a PC instead because cooling is much better and thus, higher performance.
Tack så mycket !
Thank you
How can I represent biological agent in abacus
Pleas
Please Email at learnsharewithdp [at] gmail [dot] com. I can help you with that.
how to design 6 layers of soil interaction under pit foundation
thans is very helpful