I think if the take a tooth less bucket and add a 6 or 8 feet wide blade to the bucket they could clean the walls better,, but a better machine operator would also help ..
i'm betting it's intentional. creates engagement in the comments. drives me nuts myself, i can't imagine what the operator is going through taking so little at a time. you can tell this person can operate this machine by how smooth it is moving, it's not jerky at all. this is on purpose. WolfieColada!
in these areas, the people that buy these machines have no idea how to run them, and the people they hire are the cheapest they can find, likely with little to no experience themselves. It's not like the US where you pay professionals for speed and efficiency.
Extend at maximum and dig a full bucket in the center. Now open in extending to break the bottom of the pile. Now dig a trench from bottom to top ...5 minutes and all it's done
A great plan, with just two minor problems: A) the bucket cannot even reach half-way down. B) the operator cannot see the bucket. Also this is iron ore, not dirt or sand. Those trucks carry 100tons of it and dropping 8x8x8 foot boulders onto this layer makes *no* difference. The operator is doing fine, you just have no clue how this works.
At the rate that excavator is moving, it would take a month or more to clean that hopper. That operator would never work for me being that slow. Production is money, and that company is losing lots on the downtime.
Why does it seem like it's the first day for ALL these operators? Why don't they have a true long reach with just a flat blade and clean the opposing wall so they can see? Logic would tell you to clean the bottom first.
Really enjoyed this video. Can you make more of these? I would like to see them made more often. Thank you for sharing. Looking forward to your next one
First, they are called an operator. Second, they have a job in a mine operating heavy equipment and you are just watching them on UA-cam and making dumb comments. How about that?
Attach a large rake to the excavator bucket ? - An der Baggerschaufel eine große Harke anbringen ? Loosen the (sand) by shaking ? - Durch Erschütterung den (Sand) lösen ?
Another commenter who said that he worked in the mining industry stated that maintenance costs are reduced when the equipment design encourages material to remain adhered to the chute surfaces, so that the abrasion is "dirt grinding against dirt" rather than "dirt grinding against steel". If true this might explain the checkerboard surface texture of the dump truck buckets and the sides of the chute and the sides of the buckets of the front-end-loaders.
If the hopper was designed and built with the angles greater than the angle of repose of the feed in the first place, you wouldn't need to waste production time cleaning it.
Start from the bottom work your way up. That way the rocks at the top will fall freely down the hole and won't get caught on the lower pile. Why is the operator afraid to dig with the bucket ?
This fella is smooth enough but needs educating on how this should be done. The slide wall is far too flat. Give it a few feet increasing the slope and these fellas can be doing something else.
Bon, on s'en fou de la "PUb" qui dure et on passe à autre chose... Déja, le bras et le godet de la machine ne sont pas adaptés pour faire une bonne maintenance du centre...
Well, that was painful to watch, how's that place making money. Saw another one of these an they were using a pekker to clear the hopper, you couldn't make it up.
Ich hätte gerne mal so Urlaub wie die Vögel schaffen. In der Zeit hätte ich schon eine ganze Insel bevölkert. Ich glaube die müssen für ihre Arbeit noch Geld mitbringen.
ce n'est pas du bon travail il faut en premier virer le responsable du site et aussi les manchots qui gaspillent leurs temps et le carburant en faisant semblant de travailler . de plus qui sont ses gens autour de la trémie qui sont les bras ballants , croisés ou mains dans les poches ???
Material piling up on the filling funnel just shoes that the funnel is not steep enough. Removing this material by an excavator will mean that the next truckloads will deposit again in the funnel and so on and so on. Just leave the material where it is. You see that it creates a steeper „funnel“ surface which means that no more material can accumulate in the funnel. Totally useless work.
Amazing technique ?? are you serious?? there is nothing amazing about this,, get someone who can operate the machine that knows what they are doing,, that would be Amazing..
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
To clear the walls it needs a Long reach arm and a wide no tooth bucket. The amount of ore stuck on the sides is ridiculous and looks a mess
I think if the take a tooth less bucket and add a 6 or 8 feet wide blade to the bucket they could clean the walls better,, but a better machine operator would also help ..
Hire someone that knows how to operate an excavator. 😅
Most of those Asians have only just got used to using a hand shovel!
I agree with on that that dude is no using the full ability of that excavator
i'm betting it's intentional. creates engagement in the comments. drives me nuts myself, i can't imagine what the operator is going through taking so little at a time.
you can tell this person can operate this machine by how smooth it is moving, it's not jerky at all.
this is on purpose.
WolfieColada!
I'm not even an excavator operator, and watching it was tough!
in these areas, the people that buy these machines have no idea how to run them, and the people they hire are the cheapest they can find, likely with little to no experience themselves. It's not like the US where you pay professionals for speed and efficiency.
This is the second one I've seen with terribly ineffective cleaning techniques, two different devices.
In further thought, the company is probably just using the equipment they have to the best of their ability.
Extend at maximum and dig a full bucket in the center. Now open in extending to break the bottom of the pile. Now dig a trench from bottom to top ...5 minutes and all it's done
A great plan, with just two minor problems:
A) the bucket cannot even reach half-way down.
B) the operator cannot see the bucket.
Also this is iron ore, not dirt or sand. Those trucks carry 100tons of it and dropping 8x8x8 foot boulders onto this layer makes *no* difference.
The operator is doing fine, you just have no clue how this works.
I've been around this 50 yrs this is painful to watch company must be all brother in laws and nephews
Why don't they use that legendary cleaning hook?
I'm certainly amazed at this amazing technique !
D'accord avec la plus part des commentaires. Voir tant de perte de production 😢
At the rate that excavator is moving, it would take a month or more to clean that hopper. That operator would never work for me being that slow. Production is money, and that company is losing lots on the downtime.
If you start at the bottom and work upwards it’s going to go a lot faster.
Even Fred Flintstone was more productive than these bunch of jokers.
Always wondering that such a huge mine has the time to work and clean with unsuitable gear.
Picking up the same dirt over and over, what an operator🤯
Why does it seem like it's the first day for ALL these operators? Why don't they have a true long reach with just a flat blade and clean the opposing wall so they can see? Logic would tell you to clean the bottom first.
first day at the job?
Я так же нежно поглаживаю свою жену как этот экскаваторщик пытается работать
С низу надо начинать
Why are they not cleaning more before they leave? That makes no sense
Really enjoyed this video. Can you make more of these? I would like to see them made more often. Thank you for sharing. Looking forward to your next one
You dump half ton boulders in the chute and you want to be soft?
Is there a reason the operator refuses to use the bucket as a bucket? Just dig the dirt out instead of scraping a couple inches at a time.
Killen time
My God…! Get a LONG REACH. START AT THE BOTTOM! 😵💫
That so called excavator driver is a waste of time and diesel.
His doing his best
Kinda like your conception
First, they are called an operator. Second, they have a job in a mine operating heavy equipment and you are just watching them on UA-cam and making dumb comments. How about that?
@@chrislindquist2003 ce sont quand même des bons à rien opérateurs ou pas !!!
Did you ever think about whether he could even see what was going on in the pit? Doesn't look like he had a great view.
They could extract some metals with a big magnet on the bucket?
I hope the excavator operator adjusted & reduced the maximum back pressure of the hydrolic pump so it does not damage the hopper.
Attach a large rake to the excavator bucket ? - An der Baggerschaufel eine große Harke anbringen ? Loosen the (sand) by shaking ? - Durch Erschütterung den (Sand) lösen ?
Halt keine deutsche Wertarbeit.Wenn ich sehe wie der den Bagger bedient klappts mir die Fußnägel nach oben😂😂
@@kurzschnautzert180 Ja, Theorie und Praxis , stimmt effizient arbeiten geht anders .
This needs to be a steeper sides and deeper to stop it sticking to the sides just the same as the other sides
Another commenter who said that he worked in the mining industry stated that maintenance costs are reduced when the equipment design encourages material to remain adhered to the chute surfaces, so that the abrasion is "dirt grinding against dirt" rather than "dirt grinding against steel". If true this might explain the checkerboard surface texture of the dump truck buckets and the sides of the chute and the sides of the buckets of the front-end-loaders.
If this guy is an operator then I am a jet pilot
pakai pc200 Long Arm lebih Baik bisa Maksimal. pengawas nya kurang pengalaman Spertinya,
If the hopper was designed and built with the angles greater than the angle of repose of the feed in the first place, you wouldn't need to waste production time cleaning it.
If they had a better excavator driver it would take half the time. He needs to take much deeper scoops starting from the bottom.
Machine operator is definitely charging per hour 😅
Amazing….amazing that he cleaned it out…Oh he never did he🙄
Start from the bottom work your way up. That way the rocks at the top will fall freely down the hole and won't get caught on the lower pile. Why is the operator afraid to dig with the bucket ?
They could have used a flat blade bucket and cleared the faster
Dont spraying the water it will stick to it and build up the dirts .just leave it alone no waters i know dusted...
This fella is smooth enough but needs educating on how this should be done. The slide wall is far too flat. Give it a few feet increasing the slope and these fellas can be doing something else.
กลัวมันเจ็บ หรือคลิปไม่ยาวพอ
Looks like the excavators is on a roof of a building but looks like a coverup for a drill...anchor...or actual iron cover for the lava.
Turn the excavator side on You will see more
why are they not dumping while they clean
Bon, on s'en fou de la "PUb" qui dure et on passe à autre chose...
Déja, le bras et le godet de la machine ne sont pas adaptés pour faire une bonne maintenance du centre...
I understand not wanting to damage the liner but this is absurd.
Well, that was painful to watch, how's that place making money. Saw another one of these an they were using a pekker to clear the hopper, you couldn't make it up.
Ich hätte gerne mal so Urlaub wie die Vögel schaffen. In der Zeit hätte ich schon eine ganze Insel bevölkert. Ich glaube die müssen für ihre Arbeit noch Geld mitbringen.
why did you put my channel?
Means?
Already removed
@@TECHNICALINFOMINING k
Safety First. All next.
現場の責任者の移動をお願いします🙇
パァーフェクトな仕事をし無い
Really don't you know how gravity works start from the crusher up let gravity help you.
The wheel loader opperator sure knows how things are done !
Ain't got no gas in it.
Cool video
That was not even 20% clean.
Total waste of time and diesel.
Wouldn’t it help if the operators did not load so much dirt in the dump trucks???
i am literally screaming at my monitor and kicking my desk, FFS man get on with it.
Mal deutsche Fachleute ran. Ist nicht mit anzusehen diese Stümperei
Wow,never seen so many negative comments here.At least he is getting the job done
Is he though, never seen one actually cleaned out and he keeps picking up the same dirt 🙄
This Fool surely doesn’t know how to work this excavator. Look at him he making me cry 😢
Worst clean out job ever. I could have done alot better using a scraper and a shovel lol.
I know I'm not the only one, but has anyone else thought this might be the newest method of getting rid of a body? At least you won't recognize them.
This worker should go get some potatoes, because he doesn't know anything about the machine!
Operador é fraco
ce n'est pas du bon travail il faut en premier virer le responsable du site et aussi les manchots qui gaspillent leurs temps et le carburant en faisant semblant de travailler . de plus qui sont ses gens autour de la trémie qui sont les bras ballants , croisés ou mains dans les poches ???
Can you say POINTLESS 🤦🏾♂️
プラントを管理する、責任者が、余り?指示をし無い😅
仕事なのだから!!
いい加減な仕事をし無いで下さい!
your Camera quality is not good.
If you don’t like it don’t watch it?
Slabota 😂
I would go far down as I could and dig with water up
Way not water or I use bucket and shove down
Are these harsh comments really justified?
Yes
Definitely
Yes
Did he really clean it out?
Not good cleaning 🥱🥱👎👎👎
Material piling up on the filling funnel just shoes that the funnel is not steep enough. Removing this material by an excavator will mean that the next truckloads will deposit again in the funnel and so on and so on. Just leave the material where it is. You see that it creates a steeper „funnel“ surface which means that no more material can accumulate in the funnel. Totally useless work.
More like amazing fail of cleaning..
Painfully bad process
Berja⚜️¹
operatorx lemot
больно смотреть как работают олени... , а что нельзя загнуть ковш и повозить им влево вправо???
Amazing technique ?? are you serious?? there is nothing amazing about this,, get someone who can operate the machine that knows what they are doing,, that would be Amazing..
Vous êtes du métier ?
@@Vincent-nm4pw i operate heavy equipment.. so what does that matter ?
포크레인 기사 운전 못하네 박거라