Râteau soleil sur chargeur frontal/Frontloader Mounted wheel rake
Вставка
- Опубліковано 13 жов 2024
- Modification fait par moi-même d'un rateau soleil Vicon afin de l'attacher sur le chargeur avant et le replier pour le transport
Modification of a Vicon wheel rake to fit on a frontloader and to fold for transport on the road
Need wheel hay rake 2+2 which work in sugarcane farm.
Could you rake and bale at once? Or are the speeds of travel to apart?
In the way i made it, i cant rake and bale at once because the windrow is outside the wheel so the baler cant pick it up. Maybe it could be possible to made it with some modifications and with an other wheel rake in the left side, but in my case my frontloader tractor aren't powerful enough for the baler.
Depending of the quantity of forage in the windrows and the baler, i think it could be possible to match a speed of travel to fit the rake and the baler
@@davbilo The baler is a small rectangular bale at about 100lbs. Thanks for the information.
malin ! et a pas cher !
je voudrais faire l'équivalent pour écarter le fourrage devant le tracteur, et rassembler 3 andains de faucheuse en relevant bien l'andain que je chevauche
et aussi prendre 2 andains dans les gros méteils sans rouler dessus car ca a tendance a en laisser sous les roues, je ne gratte pas trop pour ne pas relever de galets ni mettre de terre dans les boules, les vaches n'aiment pas et le matériel non plus ...
a votre avis, en coupant un remy en 2, et former en Vé qui écarte, histoire d'avoir un andain bien homogène derrière ? ca andainerais du méteil pas trop sec ?
Je crois que cela pourrait fonctionner
C'est assez surprenant comment ce type de rateau travaille bien dans le fourrage humide
@@davbilo la difficulté, c'est que je voudrais séparer un andain en 2 pour ensuite regrouper en un gros andain uniforme gauche et droite, pour ne pas zigzager avec la presse, je n'ai pas de visuel sur la pression G / D de la chambre
il faut que j'en trouve un a pas cher pour tester ...