How to drill centered hole in a rod - Homemade idea

How to drill centered hole in a metal rod without lathe? Jak zrobić/wywiercić otwór w środku pręta bez tokarki. Cómo hacer/taladrar un orificio centrado en una varilla sin torno. Como fazer/perfurar orifícios centrados em uma haste sem torno. Как сделать/сверлить центрированное отверстие в пруте без токарного станка.
The simplest way to drill in the center of rods is to make a drill guide, insert the rod into the bearing, what's next in the film. This awesome idea lets to make straight holes in bushings in garage conditions.
Link to music used in the film • SILVESTRO - Rhythm of ... - Rhythm of my heart

[@RustyInventions-wz6ir]

Very interesting. Nice work sir

[@kevinrichisneat]

The centering jig just magically appears

[@SILVESTROThingS]

Thanks for comment

[@TVRCreators]

Cool video and awesome channel. Keep going. :)

[@rubenchristensen596]

Good video but no offence thats som real goffy ahh Sony bing bong music.😄👍

[@SILVESTROThingS]

Thanks for the opinion. You would prefer a squeaking drill, because then you have to put the plugs in, which equates to no sound. :)

[@NTT286]

Why u added this worst sound track 😔😭

[@SILVESTROThingS]

Thanks for your comment😁

[@bobbybruh9723]

Worst soundtrack ever

[@SILVESTROThingS]

Thanks for your opinion, and can I ask what did you watch the movie?

[@ravioli9171]

Yeah Bobby, did you watch the movie?

[@pmittal19]

Drill size?

[@SILVESTROThingS]

Good question. I used drills with a diameter greater than 8 mm. With short drilling, I think you could eat up to a diameter of 6 mm, which is the same as in the guides for holesaws.

[@CALVINLNIKONT]

I don't get it!!!

[@SILVESTROThingS]

Understood. The friction between the drill bit and the object in the bearing is greater than on the bearing balls. When we press the drill against the workpiece, it will start to rotate. In order for the drill to start plunging, the movement of the object placed in the bearing must be blocked, in the video I use pliers. If we release the lock every now and then, the workpiece will rotate around the drill axis. If the number of revolutions of the workpiece around the axis is smaller than the number of revolutions of the drill, we obtain drilling similar to the operation of a lathe.

[@mohammedzahrani5068]

@@SILVESTROThingS I would appreciate it if you do a tutorial.

[@ESSENTIALNEEDZ]

I can't try it at home

[@doordash-nh1ih]

Gotta give you props for doing this but still... What if the bar you're drilling is 16 1/8" and is stuck inside a 16" tube? You gotta drill out the bar. Then replace the bar. Then drill perfectly centered bolt holes. Ugh. My plight.

[@SILVESTROThingS]

First you want to drill a rod to pull it out? And it's only 1/8 inch? Is there any way to thread it out and pull it out?

[@doordash-nh1ih]

@@SILVESTROThingS negative. The tube is 16" long. The bar inside it is 16-1/8" so the bar is just longer than the tube. The bar needs come out lubed up and re-inserted. Then must rotate freely inside the tube. Snow Machine suspension parts.

[@SILVESTROThingS]

@@doordash-nh1ih You didn't mention the diameter of the pipe and rod. But since it's a suspension, I think it has to be at least 4 inches in diameter. You need some kind of actuator to get the rod out and you probably won't be able to do central drilling without a lathe. I hope the pipe is not bent...😁

[@doordash-nh1ih]

@@SILVESTROThingS dudes at the machine shop were able to press it out and said that if I wire brush the tube, the rod can be used again even though both are very slightly bent. We'll see.

[@SILVESTROThingS]

@@doordash-nh1ih Well, that's cool.

[@ksdoll2404]

?'

[@SILVESTROThingS]

?