My friend, I want to thank you for taking the time to put this video together, and very calmly step by step taking thru the process. I just installed this kit today with the help of your awesome video! I looks freaking awesome! 🙏
Thanks for the step by the step demo. Very helpful! Side question though - is that the cafe deflector you have on the front? Or is it something custom? Looks very cool so wanted to ask. Thanks ahead.
Awesome man and thanks for the support. Be careful when you tighten the screws down on the visor for the Dark Knight. It can crack if you go too hard. Painter did a great job on my bike but his guy over tightened the visor screws it it put 2 light cracks in it. Solid cowl though just be warned.
The factory one is replaced by the tail lamp. The tail lamp has a plate light built into it. Small white LED shines through the bottom and lights the entire plate up. If you look closely during the test towards the end you can see it.
At that time no. After replacing just the back with LED I didn't have any issue with hyper flashing. However, when I replaced the fronts as well I did have to install an aftermarket relay.
No they worked out just fine. I am about to replace the front signals with some fork wrap LEDs. Usually hyper flash doesn’t show up until you replace all 4 corners so we’ll find out soon.
@@SCMOTO Thank you for the video it is pretty good and informative. Let us know if you had to used the led relay when you do the video for the indicators on the front. And if you had to used it , how do you installed it. I think the relay goes under the gas tank. Thanks
@@tinokovr5839 Just installed front LED signals and confirmed that inline resistors or a relay swap will be needed if you do all 4 corners. Researching the best solution and will have a video after I get something ordered.
Looks great, I ordered the same configuration just now. I saw your post on all 4 corners needing the relay so I’m gonna order that now. Great details on your post. Thanks!
Bought my Vulcan with one came to realize the light doesn’t react to me braking. Found out it was always on. Took the fender of checked wires just to realize the foot pedal switch needed adjusted lmao 🤦🏻♂️
Really like that look ! I've just got a Vulcan S for Xmas , thinking of doing the same . 14:09
Did mine today with your video thanks. Looks so much better and I can actually get my pit bull lift to work perfect now.
Glad it helped
@@SCMOTO what are the measurments for the Highsider?
My friend, I want to thank you for taking the time to put this video together, and very calmly step by step taking thru the process.
I just installed this kit today with the help of your awesome video! I looks freaking awesome! 🙏
Hey bro I am so glad it helped. Appreciate the kind words.
Great video. Thank you for the step by step instructions.
Glad it was helpful!
Very well detailed especially removing the fender. Nice job.
Appreciate it and thanks for watching
I like the new intro. Getting better with the editing bro.
Thanks
This was very helpful! I stripped one of the 3 loctite allen screws and had to dremel it out lol, but besides that super easy!
Glad it helped bud
nice to see others using the dremel trick... i did that when i installed the tail tidy a few years ago
Great video. I will use it to change it in mine.
Looks clean.
Thanks
Thanks for the step by the step demo. Very helpful! Side question though - is that the cafe deflector you have on the front? Or is it something custom? Looks very cool so wanted to ask. Thanks ahead.
Actually never mind, I found your other video and you have me sold on the dark night cowl!! Great work, man and ride safe!
Awesome man and thanks for the support. Be careful when you tighten the screws down on the visor for the Dark Knight. It can crack if you go too hard. Painter did a great job on my bike but his guy over tightened the visor screws it it put 2 light cracks in it. Solid cowl though just be warned.
Post some links for all the stuff, i just picked up a 2017 S 650 today!
Congrats. I will add some links in the description of this video
I dig the turn signals.
Thanks
That DOES look a lot better😮
Thanks bro
Pretty cool 😅
What happened to the license plate light? Is it connected to the eliminator plate?
The factory one is replaced by the tail lamp. The tail lamp has a plate light built into it. Small white LED shines through the bottom and lights the entire plate up. If you look closely during the test towards the end you can see it.
Did you already have an LED relay?
At that time no. After replacing just the back with LED I didn't have any issue with hyper flashing. However, when I replaced the fronts as well I did have to install an aftermarket relay.
Did you have to install an led relay for the indicators?
No they worked out just fine. I am about to replace the front signals with some fork wrap LEDs. Usually hyper flash doesn’t show up until you replace all 4 corners so we’ll find out soon.
@@SCMOTO
Thank you for the video it is pretty good and informative. Let us know if you had to used the led relay when you do the video for the indicators on the front. And if you had to used it , how do you installed it. I think the relay goes under the gas tank. Thanks
@@tinokovr5839 Just installed front LED signals and confirmed that inline resistors or a relay swap will be needed if you do all 4 corners. Researching the best solution and will have a video after I get something ordered.
Looks great, I ordered the same configuration just now. I saw your post on all 4 corners needing the relay so I’m gonna order that now. Great details on your post. Thanks!
@@dongranizo9100 Thanks and that's awesome. The Highsider turn signals are some of the highest quality ones I have seen. I think you will enjoy them.
Bought my Vulcan with one came to realize the light doesn’t react to me braking. Found out it was always on. Took the fender of checked wires just to realize the foot pedal switch needed adjusted lmao 🤦🏻♂️
Sorry to hear that
Hi
Do you have the link to purchase it?
I got it through revzilla.com
putting links in description of video
Were the turn signals hard to install?
Not really difficult at all. Pretty easy just take your time.