GSM/GPRS Home Automation using Blynk | TTGO TCall board | ESP32 Projects
Вставка
- Опубліковано 3 сер 2024
- You must have seen many home automation projects. Some uses WiFi, some uses Bluetooth and some uses IR. But we at techiesms changed the dimension of Home Automation a little bit.
We made a home automation project that can be controlled over cellular network via GSM/GPRS connectivity using TTGO TCall module.
To try out free trial version of Altium, click here - www.altium.com/yt/techiesms
You can support me🙏🏻 and also get benefitted on Patreon :- / techiesms
Subscribe now💪🏻 to watch some amazing videos coming up soon.
bit.ly/techiesms_youtube
_________________________________________________________________
👨🏻💻 Important Links 👨🏻💻
Buy Genuine TTGO TCALL from our store - www.techiesms.com/product/ttg...
Code used in the video - bit.ly/3sy7NqE
Introduction to TTGO TCall - • TTGO T-CALL : The Best...
_________________________________________________________________
Now you can get free PCB with every order of techiesms T-shirt or techiesms pocket notebook.
You can buy the merchandise from here,
techiesms.com/merchandise/
_________________________________________________________________
👀 You may Like these videos 👀
GPS Tracker using TTGO TCall - • GSM/GPRS based GPS Tra...
Introduction to TTGO TCall - • TTGO T-CALL : The Best...
_________________________________________________________________
Buy the components from your projects 💡🔌
ESP32 board - amzn.to/3jiwCD6
NodeMCU - amzn.to/2wbzNrZ
5V Relay - amzn.to/2OXAewN
BC547 Transistor - amzn.to/2SK3Fna
9V2A Adapter - amzn.to/3bDZjGx
7805 IC - amzn.to/2SunOic
PIR Motion sensor - amzn.to/2wclovE
DHT11 Temperature & Humidity Sensor - amzn.to/2UP8y0R
Proximity sensor - amzn.to/326YP7P
MQ135 Gas Sensor - amzn.to/2SKFBR4
LDR Light Sensor - amzn.to/2SsYskp
2pin Terminal Connectors - amzn.to/37uezT2
1n4007 diode - amzn.to/2SL4n3x
330 ohm resistors - amzn.to/2OQqUuz
Visit my Amazon Storefront for purchasing any components you need for this project or any other project :-
bit.ly/techiesms-Amazon-Store
_________________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Microphone - Samson Meteor (amzn.to/32jfVAt)
Editing - MacBook Pro
_________________________________________________________________
Subscribe Now :- bit.ly/techiesms_youtube
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
WhatsApp number :- +91 82000 79034
You can support me and also get benefitted on Patreon :- / techiesms
_________________________________________________________________
techiesms
explore | learn | share - Наука та технологія
I love my TTGO board.
Let me explain....
Sir please provide me the ttgo tcall with cam link to buy
Sir please make a video on interfacing ENC28J60 with ESP32
Make video on how to use Wi-Fi and GSM on the same board
nb-iot may be the future
I love too
bro , I just make it work my ttgo module and I got little problems with the connection with blynk-cloud but I fix it out and run like hell, is the best proyect that I have create man using blynk, thnks for your support with your videos, I really appreciate how good your content is.
Thanks. A card with these possibilities was exactly what I was looking for and I found it thanks to you. Greetings from Mexico
You deserve more people to watch this video... this is so amazing bro I appreciate your dedication to provide useful knowledge to the people
I saw more than 100+ video to find without wifi module to make IOT based automation, finally i find
I had made your previous project that was esp32 bases...and i used in agriculture motorpump to start, slow, fast and status indicator
As you know there was prob that was wifi connection ...
Than i upgrade to this project and i use instead of that project...thank you sir you and your projects are great..
❤️ love it... your amazing
Different and knowledgeable video...Big support for techie sms👏
Thank you so much 🙂
💯
Best video keep it up sir ji👌
Super and useful video sir
Today the video beginns with Differently brother .....🤣🔥❤😍
Yes 😊
Tried something new
how was that?
@@techiesms nice brother
I think Mr sachin. This is a very good module we can insall in a portable generator to monitor the Voltage, current, KW,fuel level, running time, engine temperature etc...
Because i got an enquiry last year from one of our client they are renting heavy duty portable generator set all over in UAE.
Excellent work. Sir if you can add LCD or OLED to display each output status on it including eeprom in upcoming project it will be more practical and useful.
Nice. Sir want more videos on lora with many nodes and gatway
Heard about it before but ,we will need 4 g support cause soon everyone will shut down 2 G network, and that's why I haven't purchased it yet .but let us all know if that comes in future ...😃and thanks for today's video.
This project is good for vehicles as well
Automation of 5hp irrigation water pump and Solonoid/motorized valves for for drip irrigation. This type of project could be interesting
Best UA-camr
Good evening, your channel is very good, I want to ask you a question, is it possible to share a project on two or more cell phones? Thanks a lot!!
Yup ... Please make a video about control appliances using TTGO sms & calling....
Great project...
Sir if possible Run last status... To power cut on off
Love this project.....bro why not works on diy Power wall with help with solar Energy... please help on this 👍🙏🏻
Great video. What I was looking for🤩
Does the sim card require *2g data* Or just *simple validity extension* with some account balance?
No it doesn't require 2g data
@@ajeetyadav5783 thnkz
Make a video on phone call Home automation with ttgo module
Really nice content. Keep up the good work.
Is there any 3g/4g supported development boards out there?
Yes
what yes 😂😂 name? 🙃
Arduino + SIM7600
I have a scenario, In a remote farm, let we have a motor and moisture analyzer. Using individual TTGO for each of these modules is not cost-effective. Can you make a project in which, communicate an esp 8266 module with TTGO and control and monitor over TTGO GSM network?
Great ♥♥♥
Very useful video. We can put this on vehicle automation. Sir can we connect GPS tracker in this module
Already made that project
ua-cam.com/video/ps1m6bWwvEM/v-deo.html
Hello sir. I like your videos and I have a small doubt. And that it is a how to make six channel remote controller using nodemcu and blynk app. is this possible or not..!?
Please bro. give me reply
7:57 yes pls make video on that
Is it possible to share this gsm net to other nodemcus via esp32 hotspot? Please take a look on this possibility
Can you make a video with controling devices with homekit and alexa and google assistant without using any third party apps
Great video! Can anyone help me on how can we power it using a permanent source with the help of a 220V to 5V step-down power module like a HiLink power module.
Sir.
Show us how to make internet down sms alert with this module.
Thanks ❤️
Bro. could you make some videos about how to develop NB-IOT for ESP/Arduino/STM32..Thx!
Please make same project for
Blynk 2.0 with same board.
Sir can we add Bluetooth control also in this project
Hello Dear,
Can you make video on how to use ESP-IDF with Visual Studio code?
Make BOREWELL MOTOR CONTROL WITH TTGO TCALL BOARD WITH BOTH CALLING AND WITH WIFI
Please make videos on Home Assistant, openHab
Bro where to buy this as aliexpress is closed any other recommended site..
sir if I want to operate with both normal SMS and gsm data then what should I do ?
I need help. I have some relays turned on with blynk over the internet with gsm...how can i make them turn off if the internet connection or the blynk connection is disconnected...and how do i make blynk refresh all the buttons and relays status on the app when it's recommended
Sir make some project using NRF24L01.... like data transfer, weather station etc.
Ok I will try
other than blynk, can i use it with arduino iot cloud?
Can I power this TTGO board with 9V Ni-mh battery through battery connector of this board?
I had a question, I want to make a project in which I want IFTTT to send a request to my ESP8266-01 (then the ESP will do some work like turning on relay). I know how to send request from ESP to IFTTT, but not the other way around. Is there any simple library that allows me to do this easily or you may be knowing any such way, please help me out if you can. Thanks. :)
GPRS service is required ?
How to reset the board to default (to erase all codes from the board)???
Make project on control 32 relay on ttgo tcal bord
Why to buy this module??, Rather we can simply use nodemcu with WiFi dongle . right
i personally would be very careful connecting a device like this directly to a the public cell network since you will be on a public address for IPv4/6.... the ESP devices dont have enough horsepower for real security.... best to put them behind a gateway device that connects to cellular and does wifi in the local
after resetting the board.. it will wait until the network connected then it will run the code.. can u make the system to run the code if there is no network and automatically connected when the network signal is available?
Can we add a sensor to esp32sim800l controller..can anyone explain
@@saikiransolo7172 yes..
Mega 2560 + WiFi R3 ATmega2560 + ESP8266 CH340G board please make video on that
Motor control pump 3 phase
Sir ttgo tcall module with cam is available in market or online shopping?
Online it's available
offline it's not available everywhere
Which website online available sir
can you tell me how can I get the Arduino's pin Internal register address. I tried a lot to find but didn't get anything.
Thanks in advance.
buddy, can you share the code needed to communicate with Telegram bot using TTGO TCall board?
Instead of blynk can we make this with web server.
😱😱 it also has a reset button....🤣🤣
Buy the way how much data it consumes...?? It supports 2g connectivity so i think 100mb is enough for a day for just get and post data on the web server.....
The best thing.... this board has reset button 😝😝.. am i right...??
Is it safe to buy TTGO T-CALL from Banggood?
Yes
I got from that website only
@@techiesms 👍👍
It is possible to send feedback sms same time.
Soooooo I have to pay for the mobile network ??? 🙄😭
Edit: anyways, good video as always ❤️👍
Yes you have to
@@techiesms 😊👍
Apn for Airtel?
Can't we just use a DTMF module than IoT module in farms??
DTMF won’t be able to send sensors data connected to our board
This board can
Make this Alexa controlled
There is a board with gps and gprs, you could build amazing tracker for escooter with remote control and alarm if you add MPU6050 and a siren 👌👌 would love to see such
There is need for such and especially if you also add to it possibility to controll addressable leds line and few more inputs out puts for blinkers and Stop signal from brake handle (sort of like scooter / electric skateboard all in one)
Bro total cost of this project ?
Pls reply
The TTGO Tcall module alone will cost you around 2-3k rs
give me the app link
Everything is still 2G where i cant use jio and airtel
First
please
Plz. Make this video in Hindi language
do you know more than BLYNK? 😑
Yes sir
Adafruit IO
Ubidots
Reyax
NodeRED
Mosquitto
Bolt IOT
And many more
I just use Blynk because it is easy for my subscribers to replicate the project.
But I made video on all of the above cloud servers
I meant app not the cloud server. Any app of your own creativity or logic?
not useful device ,2g and 3g now outdated technology.
Ya
But it still works in India, so I made it
@@techiesms appreciate your efforts Aju,pls work on home assistant.