Fastest Chainsaw Boat? Stihl 088 Surface Drive P2
Вставка
- Опубліковано 22 сер 2024
- The chainsaw surface drive gets some upgrades and it is fast, test ride in the harbor through shallow waters.
Facebook / dkthewelder
Get tools and parts here help support my channel dkthewelder.com/
Wow! That's surprisingly quick!
Yeah pretty good for a chainsaw motor!
She’s a ripper! Good on you mate! 👍🏻😎
Thanks it’s good fun , goes well for a chainsaw motor!
That oh-88 with a bar and chain on it is worth $1, 500.to2000 You could have just sold that and bought a nice motor...
Excellent brother!!! So badass as always!!!!
Thanks mate! Need a surface drive on one of your boats
@@DktheWelder stay tuned we got one 😎
I know I'm late on this video, But I have a suggestion . I run RCs and decided to build a boat around a weed eater motor and was amazed at the complexity's of boats. If you can find a RC Boat mag check it out. About your turning having the rudder raked back a little will help and also you might try turn fins they kind of act like turning brakes on a dune buggy or tractor and sit high at a angle so the inside one only cuts the water also chines on the hull will stop water creeping up and equal speed( their just little strips use 90 degree angle piece point up)
That looked like you were flying! It also looked like a ton of fun. A fixed rudder might help prevent it from sliding when you're turning
Yeah like on a surf board or a RC speed boat
2 angled on the side should give some stability in the turn
That is a good idea pretty scary sliding in such a narrow boat
Daniel your my hero mate! Been watching your videos! Keep up great work!! The videos are great
Very good, but you have to put the cylinder cover on it, otherwise the engine can be damaged cause it doesnt get cooled.
Yes a outboard vid I've been waiting for it for ages😁😁
I have been working on two projects at once but glad I got a good test run
@@DktheWelder yeah well I hope to see more boat videos as they are my fav thing to watch on UA-cam atm😁
Should try doing a bark box exhaust and a tunable carby, will give the saw some more power and less bogging
it is hard to start as well . what is a bark box ? I was going to make an expansion chamber for it but not sure the carby would keep up
@@DktheWelder you can buy tunable carbs! A bark box is an upgraded exhaust which is 100% proven to make more power and bolts into the factory location
@@jameskay7370 bark box wont fit that 088.I wonder if this guy still has the saw.
That looked like a load of fun
It is fun , starting it wasn’t though haha
@@DktheWelder lmao, looked that way 😂😂
That is pretty darn cool man, but now I challenge you, add a second one and prop shaft. Muahahaha
Alumarocket
Thanks! I think it would e crazy if I did that
Could you not rig the chainsaw motor to the jet drive? I'd think the high rpm's ot has it would surely help the jet.
I'm building a jet surfboard right now, and i'd start into a moped motor fitted out to make about 10-12hp. But i have a chainsaw engine at home, if that could work, that'd be great! Subscribed!
Yeah I was going to try that but it spins the wrong way. I could correct this with chains and sprocket but I think the jet unit is not efficient enough to make the most of the power . I will try figure out a better impeller in the future but doubt it will go as well as a propeller. I think 10-12hp would work on a jet board the chainsaw motor wouldn’t be powerful enough unless it is huge
For turning performance you need turning knives. Hydro boats use them too.
knives? I will have to look into that thanks
@@DktheWelder
Like swords on a flat bottomed sailing boat. Put them on the front of your drive pontoon, then there is sufficient distance between the steering rig and the pivot point in the water.
On sailing boats their fitted half way the hull. On hydro boats their fitted on the back end of the forward floats. Only single sided becourse they only preform left hand turns.
@@henkormel5610 ok that makes sense, have you seen my video of the new setup? I think it will steer better
@@DktheWelder
Not yet, i check it out.
You ment your surface drive? If it goes quick you will run into the same problem. The hull is planing so there is no turning performance. Maybe for the better becourse your hull is so narrow.
I think with turning knives at hard turning at speed the hull will enter a high speed roll becourse it is that narrow and your body is sitting very high. Be carefull water at speed is like concrete.
Blimey Daniel, she goes a bit now, and I bet it feels even faster when you are on board. So is the next project making some water skis so you can drag your daughter behind the boat? Do you have any ideas about why the boat does not turn well? Could you weld some shallow chine strips to the hull to grip the water in turns? It's certainly coming along. To be honest, I didn't think you'd be seeing speeds like this when we saw the early videos of this project.
The surface drive is great the fastest thing on the water maybe need hydrofoils as well haha. I think it spins out because it is only really half the prop in the water and nothing keeping it straight. Chines would help or a small rudder or I can just slow down for turns
love it
Good effort!! Thats cool, my only concern is the the revs not being quite upto its peak/happy 10000rpm, and not having the top cover has a massive effect on cooling, under revs ups load and heat, no cover reduces ducting. Would hate to see ya kill it this far in. 🤙👍🇬🇧👍
Yeah I got that chainsaw how it is , there are parts missing I guess I could buy replacement parts 👍
@@DktheWelder Fair enuf. I take it’s got something terminally wrong with it chain/bar mount wise? Just seems odd to use a £1000 saw that’s all.
Nice work is it a stepped hull? 35kmh is faster than most chainsaws on the water that’s for sure!
No it’s not. I am hoping the longtail will be faster though
Where do you get your little props from mate? Hard to find
Sps mud motor props search on google. They are pretty cheap too 👍
@@DktheWelder thanks mate! I like tinkering with these little boats too, maybe not quite as custom as you go though! Keep up the good work
A hydrofoil would make for awesome results. No need to slow down during turning if one was installed
It is a surface drive so if it got lifted by hydrofoils it wouldn’t drive, but I have a catamaran with a longtail motor that would always reach the water so that could be perfect so I will build on when I have time
Awesome man just awesome 👌
wicked!!!
Thanks Austin!
She is a ripper
sir can run on water jet thuster
52mph thats fast
It ripped mate
cool bro
Thanks 👍
That was a complete ripper
Thanks 👍
Yo! Is that a river or just a bit of flooded land?
It is where a river goes into the harbour
@@DktheWelder cool👍
How about Gorge Kambosus
George Kambosos*
need to fix the boat that it cuts the water better to much contact
Ha that thing hauls ass, weapon
thanks! would be faster with the tower of power on it!