BEST $10 smoke machine you can make (rev 2)

Поділитися
Вставка
  • Опубліковано 3 січ 2025

КОМЕНТАРІ • 25

  • @Howardtripper
    @Howardtripper 6 місяців тому +2

    For the pieces that go in to the lid you can use 2 tyre Schrader valves they work great they have grooves on the rubber that will make a nice seal on the lid then just remove the inside of the one valve for the smoke to come out and the hose. Can fit on there

  • @BeADad2447
    @BeADad2447 8 місяців тому +1

    Awesome video!
    Great idea with a coffee heater!
    Get a little tiny harbor freight 12v electric pump (10 bucks) super good video

  • @mptrader1620
    @mptrader1620 Місяць тому

    Great Video.. BTW where on the manifold is it best to connect it.

  • @vannevels6758
    @vannevels6758 6 місяців тому +1

    GOT-DAMN MacGyver! A transfer pump, a thin cigar and a lighter; >$10!

  • @danh2134
    @danh2134 4 роки тому +1

    I'm going to try this out , thank you

    • @livefree6878
      @livefree6878  4 роки тому +1

      We have found a lot of leaks with the first one we made. Cheap Soldering iron with the plastic in front works a lot better. The bicycle pump gives a lot of control so you can give a good pump and watch as you’re pumping. I also like the glass, you can see when you have enough smoke to give a pump. If you try it let me know how it works. And if there’s any improvements let me know👍

  • @pfsantos007
    @pfsantos007 6 місяців тому

    Good video thanks!

  • @edwardmmanns7454
    @edwardmmanns7454 7 місяців тому

    Too perfect... who has all those machines?

  • @abruptlyblunt
    @abruptlyblunt 11 місяців тому +1

    you'll save yourself a lot of headache if you go pull a couple old tubes out of the trash of your local motorcycle shop, motorcycle tubes have steel threaded inlets with nuts that can be used to tightly secure all your air intake and exhaust to the jar lid, just add a the appropriate sized metal washer and cut a rubber sealing washer from the the inner tube you just removed the threaded air inlet from. no lathe of waiting for glues to set, you can build the whole thing in minutes and it will be way better then using plastic pen body's and caps........

    • @mptrader1620
      @mptrader1620 Місяць тому

      Being unfamiliar with these types of tubes what do they connect to on a motorcycle so I can ask a shop if the have trashed any.

  • @FireEater
    @FireEater 2 роки тому

    Thanks for sharing

  • @PatrickSteadman-le8tq
    @PatrickSteadman-le8tq Рік тому +4

    Why not just drill a hole and put a valve stem in it

  • @scooter12368
    @scooter12368 9 місяців тому

    What was the contents in the jar that would create smoke? Looks like a rag of some sorts. What else?

  • @johnnylennox3217
    @johnnylennox3217 2 роки тому +2

    What do u use for fuel in your smoke machine..mine doesn't produce much with baby oil or lamp oil

    • @Theranthrope
      @Theranthrope 9 місяців тому

      Mineral spirits or commercial fog juice for smoke machines (same thing, just in bigger quantity).
      You can get the fog juice at anyplace that sells DJ equipment or a Halloween store.

  • @shawnpidich9480
    @shawnpidich9480 3 роки тому

    This looks like a passat? or a 1.8t engine. where did you put the hose to the smoke machine to test?

  • @Hilariokinyo
    @Hilariokinyo 3 роки тому +1

    I’m trying to do this right now and no smoke is being made the soldering iron is red hot inside the glass container. Could my jar be too big, what could be the problem?

    • @aqib2000
      @aqib2000 Рік тому

      How did you fix it

  • @-g.k.4389
    @-g.k.4389 2 роки тому

    Does this produce . 2 psi

  • @jizzybuzz397
    @jizzybuzz397 9 місяців тому

    nice smoke machine .just need a bit of cleaning under the nails

  • @peterzinia3767
    @peterzinia3767 Рік тому

    Most of the videos like this one are prepared in advance so that nothing goes wrong. Cheap soldering irons don't reach the temperature that mineral spirits combust. Most of these videos are bogus but give it a shot if you got nothing else going on. You'd have a better results if you took a Monster Bong Rip & blew it down the line. But remember to look for the leak. Don't space out & forget. You could also use a bottle of Map gas & have your buddy flick his lighter at the connections(not the tank or gas cap that would be a Dick Move). Be Safe. Don't attempt the Map gas procedure. Bad joke? Ya it was.

    • @aqib2000
      @aqib2000 Рік тому

      Yeah what’s a good way to get it hot enough since soldering iron doesn’t work

    • @leirquadros8959
      @leirquadros8959 11 місяців тому

      ​@@aqib2000 Ele não sabe , porque quem sabe faz , quem não sabe critica .

  • @peterzinia3767
    @peterzinia3767 Рік тому

    Watch your Bic pen liquefy before you get any smoke going.