Just figured out how to get the mod launcher to launch both seamless and a randomizer. Seamless: Do everything the video says, but make sure to copy the contents of the Seamless Coop file (the esrc.dll, settings, and locale file) and paste them inside the "ModEngine2" folder you created earlier. Next, open the elden ring config tolm file and locate the section where it ask you to type out any external dlls you'll be using. in that section, add "ersc.dll". it should look like this: external_dlls - ["ersc.dll"] this is what i did and after launching elden ring through the mod launcher it loaded seamless coop successfully. For Randomizer + Coop: I simply copied and pasted the contents of the "randomizer" folder into the "mod" folder located inside the "ModEngine2" folder we created earlier. *MAKE SURE TO COPY AND PASTE ALL FILES* after this, randomize your seed and if done correctly when you launch your elden ring through mod loader it should have both seamless and randomizer active. if that doesn't work, i'll double check what i did later and add an update.
didnt get this to work, but found a reddit where i followed the advice and got it to work: you go intop the same elden ring config tolm and in external dlls whrite the path to the ersc.dll in your gasme folder, so: "C:\\Program Files (x86)\\Steam\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll" this is what worked for me, hope it helps. if you do this, mod loader is not required at all, and it even worked with me using vortex to deploy seamless, just make sure its deployed when u launch elden ring trought the mod loader launcher. also you dont need to put any seamless files in modloader2 mod folder.
First off: You have an incredibly pleasant voice. Second: It didn't work for me immediately. But I got it to work doing the following: 1. Follow all steps as laid out in the video. 2. Additionally drop the SeamlessCoop folder and the ersc_launcher.exe in the ELDEN RING/Game/ModEngine2/mod folder. 3. In ELDEN RING/Game/ModEngine2 open config_eldenring.toml 4. Find: external_dlls = [] and in the brackets write {"mod\\SeamlessCoop\\ersc.dll", } without the curly braces so it looks like this: external_dlls = [ "mod\\SeamlessCoop\\ersc.dll", ] 5. Find: mods = [ { enabled = true, name = "default", path = "mod" } ] and add: { enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" }, So it looks like this: mods = [ { enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" }, { enabled = true, name = "default", path = "mod" } ] And then launch via the launchmod_eldenring.bat
If Mod Engine isn't loading Seamless Co-op go to mod engine config, there's a dll section that let's you add and load dlls. Install seamless co-op as intended and add the dll with dll's path. If it's not working, varify integrity files from steam, make a back up of your mods and at first only install Seamless Co-op. Then install other mods. DEN Maps is now updated. You can just use Denmaps instead.
@@africanchild5932 In your Mod Engine folder there's a configuration file with ".tmol" (or something similar) . Open it with notepad, there's a section called add external dlls. There's a text that tells you exactly how to add dlls but basically you want to write down the location of a dll. Putting Seamless co-op files in Mod loader used to work but now for some reason you have to mamually tell Modengine.
Step 1 - Ensure SeamlessCoop folder and ersc_launcher.exe are in your ELDEN RING\Game folder. Step 2 - Navigate to your ModEngine-2.1.0.0-win64 folder and find the config_eldenring.toml file and open with your text editor. Step 3 - Find the line external_dlls and copy and paste this line - [ "D:\\SteamLibrary\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll" ] (might be different depending on which drive you have your Elden Ring installed) **Make sure there are 2 backslashes between each folder destination! Step 4 - If done correctly the line should be - external_dlls = [ "D:\\SteamLibrary\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll" ] Step 5 - Save the text file and launch the game using launchmod_eldenring.bat in your ModEngine-2.1.0.0-win64 folder
I followed this tutorial as well and the discord for seamless isn't updated due to traffic. I cannot get seamless to work with mod engine 2 either. Although, Elden Mod Loader's log file shows that it is initiating ersc.dll, but when loading into the game, it does not load into seamless coop.
I did as well all the steps and followed every detail in this video, but it did not work. Got the "Inappropriate.." -message when launching. Then I copied the folder seamlesscoop folder with it's content to the mod -folder, in modengine2 folder and edited the config_eldenring.toml to have that external_dlls = ["mod\\SeamlessCoop\\ersc.dll"] That worked Seamless loaded, but then it did not load other mods :)
we couldn't get the randomizer to work with seamless until we tried this the seamless coop files that you add to the mod folder in the base game folder, add them to the 'modengine2' folder (aswell as the base 'mods' folder from the video) and also add "ersc.dll" to the external dll part of the elden ring config .toml file in 'modengine2' folder. this worked for us :)
"Install mod with many files and folders" is not very well explained at all.. where and what are we supposed to rename? I found a folder with a ton of dcx files... Must I copy and rename every single one? and then have double the files. One with an l and the un-remaned ones?
Nothing worked for me I followed your guide step by step and nothing worked originally seamless worked perfectly fine but trying to get any other mod to work nothing happened
this makes zero sense but i would like help because im trying to get Clevers and Mckenyu moveset into my seamless coop with my firend but none of it works i dont get my save from Seamless and when and I just get my saver files from my base game, nor do i get the seamless items
Thank you TroubleChute for the amazing explanations. Is there a chance you could make a video explaining how to set up Elden Ring in SplitScreen using Nucleus Co-Op and Seamless Co-op?
When I drag Mod Engine 2 stuff into the folder and run the launchmod.bat, it opens up a window for a split second like you but then Elden Ring doesn't launch. Any tips?
Completely shut down steam, in task manager too and reopen again. Also sometimes Elden Ring runs in task manager even when it's not running the game. Make sure that's not the case.
the co-op mods no longer works - about 2 months ago, steam updated something and that shut the lobby side of it down? it's strange because you can still invade people using the mod but the co-op is down with no clear indication anything will be fixed. sad times.
@@cainepenn6388 yeah me too. my mods initially worked but they stopped working after a restart. now, i can only have mods in default elden ring but no more mods on seamless with friends.
If anyone have problem that ersc.dll doesn't load, place ersc.dll, ersc_seettings.ini and locales into modengine2 folder where u have launcher for mods and open config_eldenring.toml with notepad++ or any text editor, then in external_dlls type next - "ersc.dll", only this worked for me, hope this will help someone with same problem
Oddly enough even following this step by step it still won't load seamless coop with launchmod_eldenring and seamless cook's launcher doesn't launch with other mods
@nubcuk I fixed it. Ended up having to also put the seamless coop settings and dll file into the modengine2. I also added the ersc.dll file to the config_eldenring.toml and it workd fine idk if I needed to do the toml part but did just in case
So all I can say is I followed all of his steps then added the seamless coop settings and dll file into modengine2 after that I opened config_eldenring.toml and added ersc.dll and in the area where you see external_dlls = [ ] I made it external_dll = ["ersc.dll"]
So ultrawide fixes.dll has to be in the elden ring/games/mods folder? But the auther says to just put the "menu" folder extracted from the zip into elden ring/games/ModEngine2/mod folder? What am i missing? Because i can see you have ultrawide fixes and some sort of ultrawide folder, i dont get it.... If only devs could actually make ultrawide support! But nooooo......
I didnt get it either to work as there are some missed steps or something has changed in the span i did this and the video was posted. @nilly0052 saved me, thank him lower down in the comment section. Ill paste it here just to be sure: First off: You have an incredibly pleasant voice. Second: It didn't work for me immediately. But I got it to work doing the following: 1. Follow all steps as laid out in the video. 2. Additionally drop the SeamlessCoop folder and the ersc_launcher.exe in the ELDEN RING/Game/ModEngine2/mod folder. 3. In ELDEN RING/Game/ModEngine2 open config_eldenring.toml 4. Find: external_dlls = [] and in the brackets write {"mod\\SeamlessCoop\\ersc.dll", } without the curly braces so it looks like this: external_dlls = [ "mod\\SeamlessCoop\\ersc.dll", ] 5. Find: mods = [ { enabled = true, name = "default", path = "mod" } ] and add: { enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" }, So it looks like this: mods = [ { enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" }, { enabled = true, name = "default", path = "mod" } ] And then launch via the launchmod_eldenring.bat
So I alr have seamless co-op mod before modloader, and modengine because I wanted to play online without mods, but now I want to play online with mods. I did everything he said, but when I launch the game in launchmod_eldenring, my save files are missing, but when I launch ersc_launch, my save files are there but no mods. How do I fix this?
did the seamless co-op did the Elden mod loader created the ModEngine2 file copied everything i needed did the password followed everything exactly right and then at 3:50 I launch it like he says to generate required files the game loads up because I can see that my mouse cursor has changed to the Elden ring cursor but its a black screen and then 2 seconds later it just closes the game and it wont load up. How do I fix this?
yo guys i have 2 questions. .first one is is it really possible to play seamless coop with friends while using carian combo mod? and second one is why does my friend do no dmg with carian combo but i do? we both downloaded the same at the same time
@@uno_3099 hey can you clarify a little? I have the eldenring.toml file open but what do I add into it and where? wdym by srsc.dll? you mean the elden ring exe file?
everything is working aside from when i launch the bat file it will not launch online and will not allow me to login. It continues to say that there is connection issues even though there isnt.
can u back up seamless mod character? thats what im trying to do so i can play seamless mod with mods but i wanna back up my character from seamless mod and this doesn't show up. and if not idk how i would make another character with mods then.
Me and my friend simply downloaded the latest seamless patch. Set the same pass word. And use tiny pot then effigy of Malenia then it shows us “ no session found” not sure what to do
Can you make a video explaining why the elden ring launcher for the DLC has disappeared in my files? When I try to put it back into the files it says access denied..
I'm trying to install this and a modengine2 loader mod. I'm doing all the steps and the mod engine mod does load, as well as the title screen of the game does have the pop up that seamless is working but when I create a character, and I start the game, I don't have the seamless mod items to control multiplayer (join/leave worlds, etc). is there a fix to that?
After Ensha invadedand I killed him, I returned to the round table, and he was still there. Then I teleported to the round table again and every npc disappeared. The game got stuck. I couldn't go anywhere and couldn't turn off the game. Does anyone have a solution?
you dont load the game from steam you just need to have steam opened and logged in. for the save you have to type %AppData%/EldenRing in the File Explorer then find the file that has random number and find the file .sl2 and copy it and rename it .co2 then you should have all your saves.
hey my friend issued that the game is perma crashing (not right at the start but 2-10 mins in) with the coop mod. do u have any ideas on what the cause could be?
Hello if someone can help it will be great. All mods and seamless coop work but when i join my friend or he join me my horse/torent stop summoning like i am in a cave. How to fix it?
7 videos on how to do this stuff and still none of it worked. Followed everything done, every step, and even the steps in the comments. 0/7 worked. Been trying to get it for 2 days and im losing my shit. Why is nothing working????
How do i delete old seamless co-op mod? Me and my friends tried opening the mod on an old patch maybe and it wouldnt work if anyone could quickly tell me that would be heavily appreaciated
So when I open the eldenring.bat, I load in with mods but no seamless Coop but when I load up with Ersc_launcher.exe, I load up with seamless coop but no mods??? What's up with that?
Some helpful tips if you already have/had seamless and mods : Tip 1 = Delete old seamless coop "seamlesscoopsettings" and "eldin_ring_seamless_coop.dll" from Eldin game files, mod folder in Eldin game files; basically anywhere else they may be (these resulting in error 1.5.1) \ Tip 2 = You need to fix external_dlls in "config_eldinring.toml" , ex. external_dlls = ["E:\\SteamLibrary\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll"] . That allowed me to load via "launchmod_eldinring" with seamless and mods. Otherwise I was just able to load with seamless. I also put "ersc_settings" and "Erse.dll" in modengine2 folder (though idk if that actually did anything I never had them there in the OG seamless and it work.
@@kaithefox3515 In external dlls section put the exact path of the dll. Make sure it's done correctly. above external dlls there's a text explaining how it's done. It should 100000% work. That's one of the only methods working.
Mod tells me I need to provide administrator permission to move to the game folder, I give it administrator permission as the only administrator and user on the entire computer, and it just tells me to try again every time
I got a virus when I first downloaded it so my pc automatically deletes it. Is it safe because I wanna play it with my friends already... Can anyone confirm if it's a false positive?
Just figured out how to get the mod launcher to launch both seamless and a randomizer.
Seamless:
Do everything the video says, but make sure to copy the contents of the Seamless Coop file (the esrc.dll, settings, and locale file) and paste them inside the "ModEngine2" folder you created earlier.
Next, open the elden ring config tolm file and locate the section where it ask you to type out any external dlls you'll be using.
in that section, add "ersc.dll". it should look like this:
external_dlls - ["ersc.dll"]
this is what i did and after launching elden ring through the mod launcher it loaded seamless coop successfully.
For Randomizer + Coop:
I simply copied and pasted the contents of the "randomizer" folder into the "mod" folder located inside the "ModEngine2" folder we created earlier. *MAKE SURE TO COPY AND PASTE ALL FILES*
after this, randomize your seed and if done correctly when you launch your elden ring through mod loader it should have both seamless and randomizer active.
if that doesn't work, i'll double check what i did later and add an update.
thank you!!
This is the fix ty fr
The external dll issue was what fixed it for me to get my minecraft horse skin for torrent working in co-op
didnt get this to work, but found a reddit where i followed the advice and got it to work: you go intop the same elden ring config tolm and in external dlls whrite the path to the ersc.dll in your gasme folder, so: "C:\\Program Files (x86)\\Steam\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll"
this is what worked for me, hope it helps. if you do this, mod loader is not required at all, and it even worked with me using vortex to deploy seamless, just make sure its deployed when u launch elden ring trought the mod loader launcher. also you dont need to put any seamless files in modloader2 mod folder.
@@DOIRAC post the link for other incase they have a similar issue?
First off: You have an incredibly pleasant voice.
Second: It didn't work for me immediately.
But I got it to work doing the following:
1. Follow all steps as laid out in the video.
2. Additionally drop the SeamlessCoop folder and the ersc_launcher.exe in the ELDEN RING/Game/ModEngine2/mod folder.
3. In ELDEN RING/Game/ModEngine2 open config_eldenring.toml
4. Find:
external_dlls = []
and in the brackets write {"mod\\SeamlessCoop\\ersc.dll", } without the curly braces so it looks like this:
external_dlls = [ "mod\\SeamlessCoop\\ersc.dll", ]
5. Find:
mods = [
{ enabled = true, name = "default", path = "mod" }
]
and add: { enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" },
So it looks like this:
mods = [
{ enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" },
{ enabled = true, name = "default", path = "mod" }
]
And then launch via the launchmod_eldenring.bat
u save my life, love u!!!!
you might be the goat!
Finally, it worked, thanks brother!
Hero, you are my hero, save my life!
The GOAT
James Marriott! You have surprised me yet again with a smooth explanation for these kinds of things. Good job.
You're very nice to listen to when doing walkthroughs like these. Honestly, man thank you
If Mod Engine isn't loading Seamless Co-op go to mod engine config, there's a dll section that let's you add and load dlls. Install seamless co-op as intended and add the dll with dll's path. If it's not working, varify integrity files from steam, make a back up of your mods and at first only install Seamless Co-op. Then install other mods. DEN Maps is now updated. You can just use Denmaps instead.
im stupid dumb that shit way down brother
@@africanchild5932 In your Mod Engine folder there's a configuration file with ".tmol" (or something similar) . Open it with notepad, there's a section called add external dlls. There's a text that tells you exactly how to add dlls but basically you want to write down the location of a dll. Putting Seamless co-op files in Mod loader used to work but now for some reason you have to mamually tell Modengine.
I'm going to like this comment so that it gets noticed. This helped me figure it out and now its working
I must be doing it wrong
@@draxinavd1711 I can probably guess what it is.
When you specify the ersc.dll location. You have to use double backslash “\\” between each folder
can't get it to work after install it just keeps saying inappropriate activity detected. it was so simple before
Step 1 - Ensure SeamlessCoop folder and ersc_launcher.exe are in your ELDEN RING\Game folder.
Step 2 - Navigate to your ModEngine-2.1.0.0-win64 folder and find the config_eldenring.toml file and open with your text editor.
Step 3 - Find the line external_dlls and copy and paste this line - [ "D:\\SteamLibrary\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll" ] (might be different depending on which drive you have your Elden Ring installed) **Make sure there are 2 backslashes between each folder destination!
Step 4 - If done correctly the line should be - external_dlls = [ "D:\\SteamLibrary\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll" ]
Step 5 - Save the text file and launch the game using launchmod_eldenring.bat in your ModEngine-2.1.0.0-win64 folder
pathing for the modengine 2.1 seem to need you to \\ have a double slash for some reason
@@xoXyrus Thanks that worked for me with the coop Mod But the other mods like more runes from defeated enemies still don't work
@@xoXyrus Thanks man, it helps
@@xoXyrus BRO YOU HELPED ME SO FUCKING MUCH THANKS A LOT MAN!!!!!
I followed this tutorial as well and the discord for seamless isn't updated due to traffic. I cannot get seamless to work with mod engine 2 either. Although, Elden Mod Loader's log file shows that it is initiating ersc.dll, but when loading into the game, it does not load into seamless coop.
This doen't work either for me.
Same here ):
I tried everything and its the same
I did as well all the steps and followed every detail in this video, but it did not work. Got the "Inappropriate.." -message when launching. Then I copied the folder seamlesscoop folder with it's content to the mod -folder, in modengine2 folder and edited the config_eldenring.toml to have that external_dlls = ["mod\\SeamlessCoop\\ersc.dll"]
That worked Seamless loaded, but then it did not load other mods :)
@@hannupelkonen3317 did you ever get it working?
this man is the best ngl
we couldn't get the randomizer to work with seamless until we tried this
the seamless coop files that you add to the mod folder in the base game folder, add them to the 'modengine2' folder (aswell as the base 'mods' folder from the video) and also add "ersc.dll" to the external dll part of the elden ring config .toml file in 'modengine2' folder.
this worked for us :)
Do you mean the one with a # or the one below it? inside of the elden ring config file
my boy, please can you make a video on what you mean here LMAO.
DAMMNNN, IT's WORK !!
Thanks !
IM GONNA KISS YOU
how tf
"Install mod with many files and folders" is not very well explained at all..
where and what are we supposed to rename? I found a folder with a ton of dcx files... Must I copy and rename every single one? and then have double the files. One with an l and the un-remaned ones?
Does adding the mod loader allow for your ERSC existing character to be played?
Cant wait to do NG+ and the Bloodborne mod with the homies. Thanks for the tut!
Nothing worked for me I followed your guide step by step and nothing worked originally seamless worked perfectly fine but trying to get any other mod to work nothing happened
this makes zero sense but i would like help because im trying to get Clevers and Mckenyu moveset into my seamless coop with my firend but none of it works i dont get my save from Seamless and when and I just get my saver files from my base game, nor do i get the seamless items
Thank you TroubleChute for the amazing explanations.
Is there a chance you could make a video explaining how to set up Elden Ring in SplitScreen using Nucleus Co-Op and Seamless Co-op?
When I drag Mod Engine 2 stuff into the folder and run the launchmod.bat, it opens up a window for a split second like you but then Elden Ring doesn't launch. Any tips?
Me too 😮💨
Yep been my problem for awhile
Completely shut down steam, in task manager too and reopen again. Also sometimes Elden Ring runs in task manager even when it's not running the game. Make sure that's not the case.
Same problem
the co-op mods no longer works - about 2 months ago, steam updated something and that shut the lobby side of it down? it's strange because you can still invade people using the mod but the co-op is down with no clear indication anything will be fixed. sad times.
I follow the guide step by step and when I launch the eldenring.bat file it still launches it without seamless co-op
Found a fix?
having the same issue too. followed everything and even redid the entire process incase I missed something and still doesn't work
@@john_wack I found a fix so that modengine would run seamless but then ran into the issue that it didn't run my mods with seamless
@@cainepenn6388 yeah me too. my mods initially worked but they stopped working after a restart. now, i can only have mods in default elden ring but no more mods on seamless with friends.
@@cainepenn6388 did u ever fix it?
can you still use the new invasion feature if you have seamless and other mods installed?
what if multiple mods have a regulation bin? i can only get one working at a time
This was perfect thanks. Does the "_l" for remote visuals also work for Torrent, so each player has their unique torrent?
I can't access it because it asks for my cell phone number and unfortunately mine is connected to a work account, what do I do?
Can you do a video on how to combine mods to an already existing seamless CO-OP file through vortex mod manager?
If anyone have problem that ersc.dll doesn't load, place ersc.dll, ersc_seettings.ini and locales into modengine2 folder where u have launcher for mods and open config_eldenring.toml with notepad++ or any text editor, then in external_dlls type next - "ersc.dll", only this worked for me, hope this will help someone with same problem
This worked! Thank you so much
are you still launching the game using the launchmod_eldenring?
@@jackboyle4944 yes
Seamless still isnt loading doing this am i doing something wrong?
@@James-tm5st same the above didnt fix it
when i mod seamless coop will it affect the base game? i really dont want to risk corrupting my normal elden ring saves.
Oddly enough even following this step by step it still won't load seamless coop with launchmod_eldenring and seamless cook's launcher doesn't launch with other mods
same for me.. it just launches vanilla elden ring without ersc
@nubcuk I fixed it. Ended up having to also put the seamless coop settings and dll file into the modengine2. I also added the ersc.dll file to the config_eldenring.toml and it workd fine idk if I needed to do the toml part but did just in case
@nobody-dd2wy How did you add the ersc.dll file to config_eldenring.toml ?
@@nobody-dd2wy I tried this but did not get anything working. Is there any more info you can provide about what you did?
So all I can say is I followed all of his steps then added the seamless coop settings and dll file into modengine2 after that I opened config_eldenring.toml and added ersc.dll and in the area where you see
external_dlls = [ ]
I made it
external_dll = ["ersc.dll"]
in the discord the seamless modding doesnt exist
U come in so clutch man
These tuts are so helpful❤
So ultrawide fixes.dll has to be in the elden ring/games/mods folder? But the auther says to just put the "menu" folder extracted from the zip into elden ring/games/ModEngine2/mod folder? What am i missing? Because i can see you have ultrawide fixes and some sort of ultrawide folder, i dont get it....
If only devs could actually make ultrawide support! But nooooo......
I didnt get it either to work as there are some missed steps or something has changed in the span i did this and the video was posted. @nilly0052 saved me, thank him lower down in the comment section. Ill paste it here just to be sure:
First off: You have an incredibly pleasant voice.
Second: It didn't work for me immediately.
But I got it to work doing the following:
1. Follow all steps as laid out in the video.
2. Additionally drop the SeamlessCoop folder and the ersc_launcher.exe in the ELDEN RING/Game/ModEngine2/mod folder.
3. In ELDEN RING/Game/ModEngine2 open config_eldenring.toml
4. Find:
external_dlls = []
and in the brackets write {"mod\\SeamlessCoop\\ersc.dll", } without the curly braces so it looks like this:
external_dlls = [ "mod\\SeamlessCoop\\ersc.dll", ]
5. Find:
mods = [
{ enabled = true, name = "default", path = "mod" }
]
and add: { enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" },
So it looks like this:
mods = [
{ enabled = true, name = "SeamlessCoop", path = "mod\\SeamlessCoop" },
{ enabled = true, name = "default", path = "mod" }
]
And then launch via the launchmod_eldenring.bat
So I alr have seamless co-op mod before modloader, and modengine because I wanted to play online without mods, but now I want to play online with mods. I did everything he said, but when I launch the game in launchmod_eldenring, my save files are missing, but when I launch ersc_launch, my save files are there but no mods. How do I fix this?
did the seamless co-op did the Elden mod loader created the ModEngine2 file copied everything i needed did the password followed everything exactly right and then at 3:50 I launch it like he says to generate required files the game loads up because I can see that my mouse cursor has changed to the Elden ring cursor but its a black screen and then 2 seconds later it just closes the game and it wont load up. How do I fix this?
is it possible to play multiplayer when one of us had the DLC and one of us doesnt?
is possible but if one of u enter the dlc, the other cant
yo guys i have 2 questions. .first one is is it really possible to play seamless coop with friends while using carian combo mod? and second one is why does my friend do no dmg with carian combo but i do? we both downloaded the same at the same time
Tried serveral times and cant get Seamless COOP to work with Sykkes all in one mod.. anyione get this working?
exactly what im trying to get working currently
MAKE SURE IN "config_eldenring.toml" in the external dlls portion you INCLUDE QUOTATIONS when youre adding ersc.dll path! it works for me now!
@@uno_3099 hey can you clarify a little? I have the eldenring.toml file open but what do I add into it and where? wdym by srsc.dll? you mean the elden ring exe file?
how does one download multiple mods with regulation.bin files?
Are all these steps needed for convergence and seamless co op ?
did you recently get it working? it has not worked for me no matter what i seem to do
I can't get it to launch in seamless coop no matter what I do.
did u get it sorted yet? im having same issue
I can't get the fps mod working does anyone know how to install it?
everything is working aside from when i launch the bat file it will not launch online and will not allow me to login. It continues to say that there is connection issues even though there isnt.
thank you goat
Latest update, v1.7.4, has bug with infinite loading screen loop when going to round table
what if i have multiple regulation.bin files? can i just rename one and drop it in and they will both work?
When I try to launch launchmod elden ring.bat file nothing happens, does anyone know why?
did u fix it ?
@@leyonyu3981 nope bro
@@leyonyu3981 make sure you're not extracting modengine2 files into Game. Make a folder in game and drag the files into that
The issue that fixed it for me was making sure I had the right version of mod engine; I had 2.0, not 2.1
where'd you get 2.1?
i must be doing something wrong because it just keeps saying that i have to log in, i followed each step
I did the step's of modengine2 but it doesn't launch anything
If anyone know what's the problem pls tell me
Either my mods are working and the co op mod isn't or the co op is working and my mods aren't what do I do
could anyone tell me if convergence just doesnt work with seamless co op anymore
i hv a cracked version of the game(dlc) i installed from aimhaven and when i open mod engine, it takes me to my old non dlc elden ring. pls help😭😭🙏
can you make a video on using the de bug tool my gf got a infinite loop loading bug
Elden Ring Mod Loader is not needed. Mod Engine 2 has been able to run DLLs for a while now.
can u back up seamless mod character? thats what im trying to do so i can play seamless mod with mods but i wanna back up my character from seamless mod and this doesn't show up. and if not idk how i would make another character with mods then.
My game will run and the mods work, but the dlc items have no icons in the inventory menu. Does this happen for anyone else??
Me and my friend simply downloaded the latest seamless patch. Set the same pass word. And use tiny pot then effigy of Malenia then it shows us “ no session found” not sure what to do
have u tried to check if u wrote the same password
or
does your password has spaces
or
does your password has "non-english" letters
@@satobadnli1606 yes we checked. Just the one space after the = then same password
@@satobadnli1606 going to verify files again and try next time
@@bbickerstaff23 imma make a vid tomorrow, maybe u did little thing wrong(is common when u modding)
@@satobadnli1606 Id appreciate any help. We did it correctly before DLC been playing a few months, but once we updated we have issues connecting
has anyone tried this with the clevers moveset modpack i cant seem to get it down, any tips?
does not work with me
i can not get the regulation bin files to install properly is there anything else i need to do?
For me it either works w/mods or seamless coop vanilla sighhh depending on which launcher I use
Having the same issue
What if you want to play solo with the same mods when your friends arent on? Would you just take the seamless co op DLL out of the modengine folder ?
so today it says this version 1.7.2 is depreciated and requires an update so what do i do ?
, i dont want to lose progression greetings from belgium
1.7.5 and newer versions seem to be incompatible with Mod Engine 2, have not found a workaround yet
Not worked. I even cant install mod without seamless coop
its not using my seamless save file but instead using my main and putting me in offline mode
have the same problem
same here, tried adding the dll to the toml too and it still wont work
Looks like a new update is out. Do I just redownload the file and replace it. Or should I delete the older version and then download?
I have the Problem that only my Boyfriend the Host of the World can enter BOss Rooms how to fix it?😭😭😭😭
Can you make a video explaining why the elden ring launcher for the DLC has disappeared in my files? When I try to put it back into the files it says access denied..
i tried manny times step by step for the Randomizer but it didnt work...
So all the mods that were last updated before the DLCrelease won't work?
I'm trying to install this and a modengine2 loader mod. I'm doing all the steps and the mod engine mod does load, as well as the title screen of the game does have the pop up that seamless is working but when I create a character, and I start the game, I don't have the seamless mod items to control multiplayer (join/leave worlds, etc). is there a fix to that?
Rest at the first site of grace
Whenever I copy it, it just has my old SC save files but not the newest one I made for the dlc 😢 I need help!
for me it doesnt load seamless coop i get my regular game with any other mods i installed
do my friends also need to buy shadow of the erdtree?
After Ensha invadedand I killed him, I returned to the round table, and he was still there. Then I teleported to the round table again and every npc disappeared. The game got stuck. I couldn't go anywhere and couldn't turn off the game. Does anyone have a solution?
can you still start a normale game without geting banned? with the mods installed in seamless
im new at the game .. and its not work with me on steam .. i did its step by step
and its start new save for me
you dont load the game from steam you just need to have steam opened and logged in. for the save you have to type %AppData%/EldenRing in the File Explorer then find the file that has random number and find the file .sl2 and copy it and rename it .co2 then you should have all your saves.
does this not work with Syykes all in one?
I did everything just as described, but when I start the bat file it start elden ring without seamless coop.... any idea what I am doing wrong? :/
same here 😭
Same! I’m getting an error. Idk what to do. 😢
same for me
I wonder if we’ll have to wait longer for it to work.. Hopefully not. 🫣🫣😭
Same.. coop only works when i use the coop launcher exe... bat file wont load coop mod for me
Can you do a guide on how to get seamless coop working with Map for Goblins?
hey my friend issued that the game is perma crashing (not right at the start but 2-10 mins in) with the coop mod. do u have any ideas on what the cause could be?
Hello if someone can help it will be great. All mods and seamless coop work but when i join my friend or he join me my horse/torent stop summoning like i am in a cave. How to fix it?
Can't get map for goblins to work with seamless
i cant get seemless to work with modengine2
The game won't launch from the bat file. Anyone got any suggestions?
7 videos on how to do this stuff and still none of it worked. Followed everything done, every step, and even the steps in the comments. 0/7 worked. Been trying to get it for 2 days and im losing my shit. Why is nothing working????
Doesnt launch with seamless enabled brother.
How do i delete old seamless co-op mod? Me and my friends tried opening the mod on an old patch maybe and it wouldnt work if anyone could quickly tell me that would be heavily appreaciated
Having a damn hard time doing it with the Jalter mod. It has .dcx and it's just not working man
So when I open the eldenring.bat, I load in with mods but no seamless Coop but when I load up with Ersc_launcher.exe, I load up with seamless coop but no mods??? What's up with that?
same here
Seemless just keeps crashing on the white screen no matter what I do.
i cant seem to get it to work at all with randomizer, both coop and randomizer work separately but i cant get them to work together. any tips?
Same
I got it to work
So in the elden ring toml file
I made the "-" sign into a "=" sign and it worked
thanks for the video ! is it possible to be banned for that ?
no if you play with the mod, if you want to play vanilla just delete or move all the files to another folder to be 100% sure its safe to play
i dont have dinput8.dll in my game folder, how can i find it or can i remove mod without it?
the dll is in Mod loader's files. drag it in game folder.
when i run with modengine 2 the seamless coop dont work
Newest versions of Mod Engine 2 and Seamless are incompatible rn
Some helpful tips if you already have/had seamless and mods : Tip 1 = Delete old seamless coop "seamlesscoopsettings" and "eldin_ring_seamless_coop.dll" from Eldin game files, mod folder in Eldin game files; basically anywhere else they may be (these resulting in error 1.5.1) \ Tip 2 = You need to fix external_dlls in "config_eldinring.toml" , ex. external_dlls = ["E:\\SteamLibrary\\steamapps\\common\\ELDEN RING\\Game\\SeamlessCoop\\ersc.dll"] . That allowed me to load via "launchmod_eldinring" with seamless and mods. Otherwise I was just able to load with seamless. I also put "ersc_settings" and "Erse.dll" in modengine2 folder (though idk if that actually did anything I never had them there in the OG seamless and it work.
thanks for the virus / jk it actually worked thanks bro #eldenGOAT
Did a fresh install, followed the Video and your comment, still doesnt work for me. is there anything else you did or did i do something wrong?
THIS! Although for me, I had to move ERSC.DLL into the mode engine folder.
Tip 2 worked for me thank you so much! I'm getting ready to start a whole personal campaign in the game with one of my friends lol
@@kaithefox3515 In external dlls section put the exact path of the dll. Make sure it's done correctly. above external dlls there's a text explaining how it's done. It should 100000% work. That's one of the only methods working.
no sessions found error please help in dlc
Mod tells me I need to provide administrator permission to move to the game folder, I give it administrator permission as the only administrator and user on the entire computer, and it just tells me to try again every time
I got a virus when I first downloaded it so my pc automatically deletes it. Is it safe because I wanna play it with my friends already... Can anyone confirm if it's a false positive?
seamless coop when downloaded from nexus mods is safe idk about anything else mentioned in this video
legit followed this step by step the whole way and it simply does not work
mine has a pop up that says fatal error
games launches without seamless trust me i did everything right and this happened not sure if the update from today broke it or not
found a fix just had to edit the elden ring toml and put the location of seamless with space and quote
pls created guide how to install convergence mods with coop mods