One on ones with Fran on the dyno is always the most amusing part of the videos.
Great vid as always guys. That 1LE made great power.
Eric and Matt both know what they are doing building and modifying Corvettes and Camaros and everything else that comes in to RPM. Both have very good work ethics. I think I have watched them do every mod that can be done. Every one at RPM is every knowledgeable about the cars that come in to the shop. I like Steve's commentary about the builds. Great insight. Bill shows he knows about all about the builds also when he in in the shop. Of course Fran is the man that holds it all together. His tuning is a great asset to RPM. jmho
My Camaro SS 2018 needs to be done just like this beautiful monster ✊Excellent job guys ✊
Those are some crazy numbers on that LT1 build. Great video again.
Good luck this weekend. Can't wait to see the ZR1 running again.😁
The best part of the vids are fun time with Fran,not only are they often funny as hell,you more often get good educational infoo.
such a complete solid build in the Camaro
Just awesome.. awesome work guys incredible and now to add more to my wishlist and figure the $$$ flow...
When I need my Chevy fix, this channel is the place!
That Camaro sounds so good
Freaking awesome. That's all I have to say. The videos never disappoint.
Duuuuude, that dyno graph for the SS looks like the start of a tall roller coaster. Mclovin.....niiiiiice
That car made me excited I was trying to climb in my phone sweet 👍 work
“The tail light special” that’s a good name for the cam.
Love your channel and all the cool vids!! Zzzzzz's for day's 💯❗❗❗❗
When you guys install a new clutch, do yall break it in? Or just put it on the dyno?
Nothing makes me moist like watching Matt putting in a cam!😂
Sounds great
Try Granatelli wires vs stock wires on a NA fbo Z06. I was curious to know if the LSx motor (LS7) would gain more WHP than than open exhaust (cutout).
Just the one forged piston and rod? Interesting approach
great vid! im doing a f1a build and you think it will be okay using the msd intake instead of hollley and stock heads making similar power?
Unreal boys !
How much power you think it could make on California 91 octane gas?
Buy a MSD, and send it to pray performance for his port work and see if it helps. He has some nasty N/A setups. But I’m curious to see if a ported one helps even more. Also you guys are right about he stock manifold. Generally leaves a dip in the upper RPM range on the dyno graph.
That's crazy guys. 980 without E85, or race gas. Great build!💪
I agree with Fran... all cams should just be named SHAFT
Greatest episode yet! I love that SS Camaro 1LE
Matt having a child takes time! With my experience having a child usually takes just that one time!😂
DAMN IT STEVE 4K VIDEO ALREADY DAMN IT!!!!! ITS A BIG DIFFERENC FOR ANYONE WHO CAN VIEW IN 4K.
That 1LE is fokkin` BRUTAL, Mang…. now I wanna see it shredding some tires ! :-)
what's the custom low side fuel system, Is it a aux or completely different pump that flows more than the ZL1/1LE pumps?
What kinda watch does fran have on? Asking for my watch collector friend....
You guys have any experience with Hemi motors or are you strictly LS?
I wonder how much the build cost to do the 1le
after going back through hundreds of episodes... Cam Name: The Raw Dog. Why? Because Matt has installed one before without using any gloves.
Matt and Eric are true gifts. #lsheroes
The butt buzzer!
Once there was 3 now only 2....shop is down someone do you know who?
Falopian Tube Rambler Cam
Zr1 chillen in the background (no big deal)
Fran is so damn funny... I was laughing so hard my stomach was hurting... I'm gonna have to try it LMAO
BowTie greatest at their best.
if i sign away my first born to you guys can you build my 1LE just like that. Great thanks
Are AI 280 cc heads for ls7 and ls3?
Sick... 🔥🔥🔥
The French Tickler or "Thumper" for the new cam identification
What’s the price tag on some work like this
I wonder if the springs were changed out , if it's smooth out that wavy thing I'm seeing. Wonder if it is at its peak for those springs . Or fuel system...? Idk that's why them boys make the dollars not me lol
Call the cam in the ZL1 “The longslong”
That first z06 dynoed low af. With headers and intake. Why would that be?
Would you put a tesla on that dyno and measure the audio db on that, i'll bet it makes 115db :)
Centrifugal Superchargers Rule!!!
Call Matt’s cam the Humper 😂
How do you guys not have 100k subscribers
Nice!!
The Slip-Around Cam
Call the cam the dirk digller 😂😂👌👌
You should follow Fran around for a day just for one episode a day in the life of Fran
The GOOTCH GIGGLER
The “CAM O’ WHOOP-ASS!”
+636 rwhp nice!
Hello guys. I have a corvette c7 with an LT1 engine and I installed the F1A94 procharger with 4.13 head unit pulley and I’m planning to replace the head pulley to 3.85 with pump gas and I couldn’t find a clear lead for the size of the belt that will fits perfectly in my corvette. In addition, my current belt is K080450 could you please advise me what is the best belt number to be fit in my new upgrade? Could any one who positive leads me out?
The way this dude wears a hat 😂
🤯That SS is an absolute MONSTER! The owner is going to lose his sh*t when he gets it back!
Just notice it makes more torque than the Zl1 with the pro charger
damn never realized you have to remove the a/c condenser on a 6th gen camaro for a cam swap
Why doesn’t rpm use the belt driven high side pump that katech makes?
Ryan Nolt i am sure they would or will when they need it, last time I looked that was very pricey.
Cool! I’ve been wanting to see how much power that LT1 made. Very cool. So is the difference between the LT1 and LT4 just fuel system and forged pistons? Aside from the obvious blower of course. Are the heads, block, rods, and crank the same?
zenithskull Do the heads flow more or are they just a little thicker in places to be more durable with boost?
Adam Murray different aluminum , chamber sizes, intake valves , higher compression ect.
But I don’t know the flow numbers on either to tell you.
LT4THOR Cam
LT4 Cam = Jimmy Jostler !
New cam name ... The Fran Tickler
RPM karaoke must be lit
How much is a set up like that cost? To make over 1000 hp.... that's truly awesome....
For various reasons we do not publicly disclose what our customers spend on their builds/cars however as always if you are interested in putting a package together for your car please email us sales@raceprovenmotorsports.net
Same thing happened to me like 5 years ago I paid for my food at jack and gave her a 20 and I got like 37 and some change lmao true story
The nut rattler
Call the cam the gap stick
Dang right about Chick Fil A. #America
Camshaft name: Pene de Burro
Cam name: Ribbed for His Pleasure
Cam Name: The Exodia
Why not use some long bolts for the cam install? Make it easier no?
Also back in the day we used all this lube so the cam would break in . Nowa days why not just lube where it rides on the cam bearing and just splash some oil on the lobes ? Keep the roller spinning instead of sliding. Not breaking balls just asking . Love the channel ! Now that white camaro has a badass sounding cam 💯💯💯
Different break in procedure for roller cams...not like old hydraulic flat tappet cams.
Cory Unferferth that’s what I mean looks like doing it the same way as the old cam.. I would think they would just lube the cam where it rides on the cam bearings not sure how much lube a roller lifter would need .. splash a little motor oil on them call it a day ..
Again not ball busting more just wondering.
Name the cam - - - "The Chode Chopper"
I love it my guys rpm keep up work and love video and I love Camaro Zl1 and c6 zo6 lot 💯💯💯💯💯💯💯👍 me Chevy gang all day
Lt4 cam name “fun sucker” lol
Whats the price on that set up on the 2018 ss
If you're interested in putting a package like this together please email us sales@raceprovenmotorsports.net
"Carlos Danger" cam name,winner get a Tshirt,thanks Steve.... No Nova plate winner?
We announced a winner for the plate, looks like u missed an episode.
Whatever happening to that other guy
ANGRY ERIC CAM
so i want this package on this white 18’ ss 1le. i need a price. like. right now. real talk sir. who can i get in contact with about this?
We list an email in the description of every video or simply call the shop during business hours Mon-Friday 9am-6pm EST.
One would think 💭 that you love ❤️ fast food 😂
what ever happened to the other tech.
I wonder too lol my comments have been highlighted but never answered so I gave up
I'm going to ask a question that everyone hates. Soo how much for them xtra ponies?
I have the same car 1LE how much for same package out the door total
For all quotes and scheduling please email us sales@raceprovenmotoraports.net
@25:46 You know why...?
When you do the builds like H/C, rods/piston stage 2,3,4 and so on if you could show the base price for each package ppl could get an idea on what to plan for. Thanks for the entertainment.
Those wheels alone taking 50hp from the car
Cam name: the bum chum
Steve, you look so damn goofy with your hat like that. Pull it down, it won't mess up your hair that bad!
The car is amazing drives like a stock car anything after 8 psi hold on lol ....
Thank you all just cant believe I own this Monster . Steve your video's are great the car looked so good on the dyno
Congratulations!!!
Beautiful car man
Insane_Hp_1LE how much did the whole setup cost? Tune included. RPM seems to be the shop to go to and I’m looking at getting an SS 1le
@@ray7027 call them and just talk to bill hes awesome . I started out going for 600 hp then ended up with this set up I had like 6 different invoices ! I don't want to give you a number and it is completely different from there's so if you know what you want call RPM
Insane_Hp_1LE car is a absolutely insane!! How’s it hooking with all the power?