This is great content - The kind I hope never to need! As always there is a LOT of disassembly to get these apart, especially broken arms. I see that the motor detachment and landing leg damage was deemed unrepairable - even if the Carbon Fiber arm proved to be strong!
Hello, my Evo light hotel had an accident. It fell from around 50 m and broke the glass of the camera and the gimbal. The impact opened a little and the camera rotates completely on its axis. I wanted to know if it is feasible to get that spare part. Even though I manage to tighten that piece so that the drone calibrates the camera and has perfect calibration of both the GPS and the Laimu, when it takes off it goes completely to one side. I wanted to know if it could be a part that is bad or where I can get the spare parts. Thank you for your time.
Hi, my evo 2 pro lodt conection to tje radio, rear leds keep flashing yellow, bind button led shows solid green and doesnt flash to bind mode when I press it I was setting it up for a shoot, turned on and it suddenly stopped Have you heard anything similar? Any ideas on how to hard reset the drone without the radio? It turn's on normally, just doesnt connect to the radio
Maybe someone knows a website where you can order spare parts for this drone from Russia now? I'm a tourist and I broke a beam in the mountains. I chose an Outel based on its characteristics and now I can't fix it.
@@aldinzorlak5131 aliexpress.com/item/1005006450594261.html aliexpress.com/item/1005004653266343.html Just as example. But ask for photo before shipping
This is great content - The kind I hope never to need! As always there is a LOT of disassembly to get these apart, especially broken arms. I see that the motor detachment and landing leg damage was deemed unrepairable - even if the Carbon Fiber arm proved to be strong!
actually the motor was overheated due to an oscillation issue and melted the plastic in the mounting pad. So I decided to change a whole arm
Hello, my Evo light hotel had an accident. It fell from around 50 m and broke the glass of the camera and the gimbal. The impact opened a little and the camera rotates completely on its axis. I wanted to know if it is feasible to get that spare part. Even though I manage to tighten that piece so that the drone calibrates the camera and has perfect calibration of both the GPS and the Laimu, when it takes off it goes completely to one side. I wanted to know if it could be a part that is bad or where I can get the spare parts. Thank you for your time.
hey is the mainboard covered in conformal coating?
Hi, my evo 2 pro lodt conection to tje radio, rear leds keep flashing yellow, bind button led shows solid green and doesnt flash to bind mode when I press it
I was setting it up for a shoot, turned on and it suddenly stopped
Have you heard anything similar?
Any ideas on how to hard reset the drone without the radio?
It turn's on normally, just doesnt connect to the radio
Maybe someone knows a website where you can order spare parts for this drone from Russia now? I'm a tourist and I broke a beam in the mountains. I chose an Outel based on its characteristics and now I can't fix it.
Could u so repair of the upper shell i have a crack on mines that need to be replaced thanks
of course I can, but I'm located in Ukraine ;)
Добрий день, я бачу що ви займаєтесь ремонтом дронів, не могли б ви дати свій контакт ?
доброго, напишіть поівдомлення в ФБ: fb.com/AutelGarage
@@autelgarage жаль але немаю фейсбуку!
I am from India my drone crashed I want to purchase spare arm ?
you can find spare arms on alexpress
Could you please point me where on aliexpress you got it i need arm and motor
@@aldinzorlak5131 aliexpress.com/item/1005006450594261.html
aliexpress.com/item/1005004653266343.html
Just as example. But ask for photo before shipping