New Bosch GRL 500 H Laser - Walk-Around
Вставка
- Опубліковано 7 вер 2024
- I picked up a new laser. Here is a walk-around of it showing all the features. I really like the laser and highly recommend it! Like what you see? Check out The Dirt Ninja on Facebook here: / thedirtninja Be sure to hit the subscribe button to see new videos every week!
Thanks for posting this video. Nicely done ! Being a BOSCH Dealer and selling laser levels we utilize video quite a bit to explain laser levels and how they are used.
Nice review. I really like the Top Con RL-H4C we have, well till now.
The real test is when a whirl wind blows the Lazer and tripod over and it still works.
Top Con 1 Wind 0 .
Thats a nice laser, i really would like to have a new one also. I like the Autoalign. Just a tip for you, i use a traffic cone that sits by it self and has a hole on top where you can put the stick in with the receiver to stand by it self. :)
And if you have gradestakes you can clamp the stick to the gradestakes with a woodwork quickclamp. :)
thequattro20v Those are excellent ideas! Thank you for the tip! Yea the auto align is a nice feature.
thequattro20v Good ideas. I made a wooden support that is fairly compact, but wind is an issue.
Dirt Ninja Hey, no problem. I've got many ideas from your videos too. The promlem now is that i want one bosch too. :) Nice price also. :)
1:50 ..I hope it turns on much less than within 30 minutes. Could be a serious production killer hahaha
Is also auto leveling and will let you know if the tripod and head have been jarred out of position while working.
I wish i could buy a receiver like this for mine
Have you had a problem with the charging point, how do you know when it is fully charged ????
Great video thanks for the content. I'm looking at getting into doing some small excavation work and I have learned a lot from your channel. I'm wanting to get a Bosch laser but also want to have a magnetic receiver for grading with a mini ex. I cannot find a Bosch magnetic receiver does your Topcon magnetic receiver work with the Bosch laser? Thanks
man you are cool sharing your ideas be blessed with more👍👍👍👍
Hi, I am trying to decide between GRL 300 HVCK and GRL 500 HV. The difference in working range (1,000 versus 1,650) is not that important for me. What s more important is if they can help me align and plumb fence posts on a sloping lot. How does the slope feature on the GRL 500 help in this case? would it give a laser line that is sloped in the direction i want to have the posts?Does GRL 300 have that slope adjustment feature? Thank you
Hey are you still using his laser setup and do u still recommended it?
Hey, nice video as usual. Just wondering if this kit can be bought with the magnetic receiver that you can stick on the excavator stick.
+Newfiestang50 No it cant be bought with one but any other brand magnetic receiver should work with it
Amazing that America is still using such a crude scale as feet and inches in the 21st century, I mean surely the accuracy of metres, centimetres and millimetres has obvious attractions for those in the building or manufacturing trades?
How about Hilti PR-30 HVS ??
How do you use the cross laser level on the roof pitch 12 12 so that you can put your metal roof panels on straight? the line goes left or right nephew go off center. How do you know where center is to begin with?
The beautiful thing about metal roofing is how easy it is to install! Make sure you have the same amount of overlap over the Facia board all the way down the panel of metal, after you double check that, screw it down, and the rest of the panels will overlap 1 rib with the piece installed before. No laser needed, just a tape measure.
Do you still use this laser??? Or have you moved on to a different company?
Do you have to hold the center line button before you enter your slope or after?
neither, it finds the slope for u
Wondering if you still have this laser and if so do you still use it / like it?
I still use the GRL 500H and like it a lot
Buy the GRL 500 HCK here
www.engineersupply.com/Bosch-Self-Leveling-Horizontal-Slope-Rotary-Laser-Level-Complete-Kit-GRL500HCK.aspx
How do you program this Thing 2 inches - stuck on millimeters cannot get it off please help
press the bottom left button (down arrow) and the bottom right button at the same time to toggle between units of measure
press the accuracy button and the down slope button at the same time
We are looking for a new laser... How do you like this one? Is it worth it? Any problems?
@dirt ninja
I use one and have not had any problems with it
How do you program this to inches mine is stuck on millimeters
If it's like other Bosch lasers, just hold the power button when you turn it on until the screen changes to mode selection (3 seconds ish).
press the accuracy button and the down slope button at the same time
When you set the slope manually, Say 4% does it have to be pointed perfectly in the direction of the slope or can you have it find the receiver to centerline at the 4%?
If I have to point the transit in the direction of the slope this could be inaccurate if I’m eyeballing it 500’ away..
Does it connect to your caterpillar ??
Operator9010 Any laser will connect with the Trimble system.
Trimble system video soon ?? ;)
Operator9010 Part 1 went up today!
returned mine after one day, sadly as an old school concrete guy I just want to turn my laser on and get going. has to many buttons to push , which to me is more room for error, also I'm already so dam busy as it is that I really disliked that it only works by charging, sometimes there is no power on our sites for weeks and last thing I need is to forget to charge. Bosch is a great company, but sorry guys this is a bad design,you need to get out of the lab every now and then.
Get a small 12V to 120V inverter for your car, that way you can charge small things off grid using your car battery when you are in a bind.