Mark- spot on with your data regarding cpm/flex analysis/torque and wall thickness. Thank you for the data! I'm playing a 5R in my driver and love it. Lightweight but stable with great feel. Very Mid launching bullets for me and no problem turning it over. GD shafts are the best in golf. A shaft for every swing.
Can you do a graphic design video comparing all the shafts like you did with ventus awhile ago? I think you did it but I can’t find the video. Your ventus video with the data was awesome. I’m curious where the VR shaft compares to others
I’ve got the GC -5S. Previously used VR 6S but was a little soft, compares very well with the ventus blue + but getting a touch more out of it distance wise plus it feels like it has a big unload from just below the grip, for me. Swinging 103-106mph.
That is a good question, this is not a speed range we have looked into for this specific product. What we are learning is there are multiple 40g high quality shafts out there that can withstand these speeds and produce good results. We are seeing the separation of long-drive players using light and soft to get one going a long way "now and again" vs higher swing speed good golfers opt for mid or traditional weight to find more of a balance of distance and consistency. At 110mph the 60g or 50g GC might be more consistent. The 40g S may withstand the speed, but i'm not sure "stable" would be the word :D. Thanks for watching and interacting!
Do you have any spreadsheets of golf shafts that can be reviewed? Currently play a Tensei AV Raw White and curious about your testing, if any has been done.
We have nothing for public use released at the moment. We will look at creating content around the Tensei shafts specifically, and keep an eye out for our technology being introduced to a lot more locations in the coming months!
These are hard to compare, different geometery, different EI curve and different feel. The Kai'Li is a traditional way to knock launch down and GC is a different way of doing it. Neitehr is good or bad, but they will feel very different and create similar flight.
This would look sweet on my TM Mini Copper. I swing my copper pretty consistent around 97-98mph. I can get after it to 100 but do not like too. Not sure the characteristics of this shafts would be a fit for that swing speed. I do have a very fast tempo. Ugh. New subscriber.
Thanks for watching and subscribing! The weight options in this shaft open it up to a huge range of speeds. Depening on how you transition the club I would try a 50g version of this. We are seeing people enjoy the siffer feel at lighter weight.
Good stuff, I'm paying more attention to any S3 data I can find and it is incredibly helpful. Is there any way for average joes to gain access to S3 database from cool clubs? I would be willing to pay for a service like that.
Currently, S3 access is not available to the general public. However, stay tuned for a press release expected before the end of the month, which will provide new opportunities for accessing this data and discovering the perfect shaft for your needs... with additional technology! Thank you for watching and participating.
Getting fitted by cool clubs made a huge difference. I had been taking lessons for about 2 years but still couldn’t hit a fairway wood consistently. That changed when they fit me into a graph if design IZ shaft. Lessons are important, but so is having a shaft that fits yours swing
I love the guys at Cool Clubs. I had a great fitting with Chris Thomas in Scottsdale, AZ.🎉
Thanks for sharing with our community! We’re glad you had a good time.
Mark- spot on with your data regarding cpm/flex analysis/torque and wall thickness. Thank you for the data! I'm playing a 5R in my driver and love it. Lightweight but stable with great feel. Very Mid launching bullets for me and no problem turning it over. GD shafts are the best in golf. A shaft for every swing.
Thank you for interacting, this is a great addition to the GD lineup! We are glad you are getting results and enjoying the content.
Can you do a graphic design video comparing all the shafts like you did with ventus awhile ago? I think you did it but I can’t find the video. Your ventus video with the data was awesome. I’m curious where the VR shaft compares to others
We will definitely get something like this done for you!
I’ve got the GC -5S. Previously used VR 6S but was a little soft, compares very well with the ventus blue + but getting a touch more out of it distance wise plus it feels like it has a big unload from just below the grip, for me. Swinging 103-106mph.
Thank you for giving feedback on your experience, we expect a lot of people to do as you did and be able to reduce weight and not lose accuracy!
I am gaming a House Of Forged Ultra -220 CPM With 3° of torque at the Tip. 46 grams @ 441\2. Its a absolute Bomber. Keep the good content coming
Thanks Jack and Mark.
Thanks for watching!
Hi guys in the GC 4S could you swing that at 110mph and it would hold stable ? thanks
That is a good question, this is not a speed range we have looked into for this specific product. What we are learning is there are multiple 40g high quality shafts out there that can withstand these speeds and produce good results. We are seeing the separation of long-drive players using light and soft to get one going a long way "now and again" vs higher swing speed good golfers opt for mid or traditional weight to find more of a balance of distance and consistency. At 110mph the 60g or 50g GC might be more consistent. The 40g S may withstand the speed, but i'm not sure "stable" would be the word :D.
Thanks for watching and interacting!
Do you have any spreadsheets of golf shafts that can be reviewed? Currently play a Tensei AV Raw White and curious about your testing, if any has been done.
We have nothing for public use released at the moment. We will look at creating content around the Tensei shafts specifically, and keep an eye out for our technology being introduced to a lot more locations in the coming months!
How does this shaft compare to the kai'li white shaft . ?
These are hard to compare, different geometery, different EI curve and different feel. The Kai'Li is a traditional way to knock launch down and GC is a different way of doing it. Neitehr is good or bad, but they will feel very different and create similar flight.
This would look sweet on my TM Mini Copper. I swing my copper pretty consistent around 97-98mph. I can get after it to 100 but do not like too. Not sure the characteristics of this shafts would be a fit for that swing speed. I do have a very fast tempo. Ugh.
New subscriber.
Thanks for watching and subscribing! The weight options in this shaft open it up to a huge range of speeds. Depening on how you transition the club I would try a 50g version of this. We are seeing people enjoy the siffer feel at lighter weight.
Good stuff, I'm paying more attention to any S3 data I can find and it is incredibly helpful. Is there any way for average joes to gain access to S3 database from cool clubs? I would be willing to pay for a service like that.
Currently, S3 access is not available to the general public. However, stay tuned for a press release expected before the end of the month, which will provide new opportunities for accessing this data and discovering the perfect shaft for your needs... with additional technology!
Thank you for watching and participating.
I’m also shocked the tour AD rep said the DI launches high … bro… have you ever hit your own shaft?
I beleieve he is referring to the relativity of this GC shaft and the VF.
the EI of this GC is different than anything GD has ever made, same with CQ.
Yes, this is refreshing from our point of view. We can really distinguish between EI, launch performance and feel. The GC is performing well!
to the bro in glasses, i appreciate your input but PLEASE let the others finish talking.
Lol, we’re going to look at some data and less of the sales pitchy stuff, straight to the VP of Sales’ face
We try to add out finidings and data in any situation.
Just a new $300 plus shaft. Every new thing gives golfers hope. Just get some lessons.
We love to see manufacturers trying to help people Play Better Golf.
Very interested in this shaft...wish it was a better color.
@@chucksmerdon6256 Would look great in a TaylorMade BRNR. Maybe not a whole lot else…
Getting fitted by cool clubs made a huge difference. I had been taking lessons for about 2 years but still couldn’t hit a fairway wood consistently. That changed when they fit me into a graph if design IZ shaft. Lessons are important, but so is having a shaft that fits yours swing
Not everyone sucks at golf dummy