Disaster Restoration: Fixing All The FIRE DAMAGE On My CHEAP Z28 Camaro
Вставка
- Опубліковано 26 кві 2022
- I bought a 1993 Chevy Camaro Z28 that caught on fire yesterday. Today we're going to cut all the fire damage out of it and replace it all with new. Nylon "non-repairable" fuel lines had burnt, wires melted, plastic had turned into glass art, the fire caused lots of issues. After a full day of work I should have this old LT1 Camaro back on the street and ready to cause havoc again.
Nylon Fuel Line Repair Kit:
www.oreillyauto.com/detail/c/...
Hatch Struts:
www.oreillyauto.com/detail/c/...
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make UA-cam videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#CarRescue #ChevyCamaro #Z28Camaro - Авто та транспорт
Awesome job, JR! I sure do miss her, but she’s obviously in good hands! Can’t wait to drive her again!
Nice man, is it weird to watch the progress of it getting fixed on here ??!? Especially when you know everything about the car ?? Like when JR says “ whoever installed this at this time did it backwards or used this brand parts, or I don’t know why someone would install this” (lol) but you know the answer to everything he asked ... gotta be super crazy lol
@@B0xlife1 more sad to see it since it’s no longer mine. But yes definitely weird! All the sketchy things JR has mentioned have been done by previous people, so it’s more of a facepalm moment! Haha.
I’m sure he will sell it back for $10k
I’ve had more than 1 that were just more than I could do at the time, always enjoyed watching someone put them back on the road. Some of that “it used to be mine” pride is always there, cool old Camaro for sure!!
I believe it is for sale!
I love that doorman fuel line repair kit I used to work on Chevrolet fleet cars and that kit paid for itself after the first couple times using it. And the fact that it has all the tools and fittings and is labeled makes it easy to get the job done right.
Awesome! I didn’t even know a kit like this existed!
Nice job!! , I hope you offer it back to the kid before you sell it off!!
I had a camaro that made me mad Not being able to get it fixed correctly and lack of funds to take it to a shop, I really regret selling it!
Can’t wait to see this purple beauty after the detail dudes get their hands on her!
Oetiker clamps are the best ever. That Dorman tool is slick, beats trying to use your hands to shove a heated nylon hose over a fitting (and mangling it several times in the process).
Cool repair. My favourite thing about this channel is the variety of cars and projects you showcase.
The "I'm done fucking around with it" kit
Just get her detailed and I will be on my way to pick her up! Thanx I really appreciate it!😎
That is one cool kit for fuel lines!! Nicely done! Thanks for the laugh GM....changing everything in 94. LOL
Wiper blades from O’Reilly Auto. Go with the Trico NOT the rainX !! They will fit much better!!! Just did one of those. RainX blades wouldn’t fit. Ordered in the Trico brand. 👍👍👍 they have an upside down J-Hook.
21:45 you don’t always have to buy a full exhaust for every car you have/flip lol. Just have a shop weld on a flow master for $150 and make it sound more tamed without a full stainless exhaust! Also great job with getting those repairs done so quick
even the Flowmaster American Thunder kit is under $500 at Summit and has the nice looking overbored tailpipes
My dad had the 97 30th anniversary edition. White with orange stripes. White leather interior T-tops. 6 speed with a ls. Learned how to drive stick in that car. It was awesome.
Great find, great save, nice car! Thanks for the great content as well.
my fuel line had a hole in it right underneath the driver side floor pan, happened when i welded the floors in and i used this kit! honestly was very scared about using it, but it’s held up the whole time i had it driving.
might not have been the exact same kit, but it was a similar fuel line repair kit.
Nice series JR...these are the sort of videos that make your channel so interesting and watchable... ..inspires me so thankyou.
I really love this channel. Best content.
Just get the supercharger elbow for the throttle body intake tube to delete the resonator. You can buy them from vortech I believe for about 100 bucks. It looks really good too!!
Tell us about the SRT8 Dodge Magnum on the lift in the background. One of my favorite cars.
Great Job! I can’t wait to see it detailed out and what you get for it.
Sweet! Nice job. A guy I went to school with got a brand new one of these in 1995 and I always loved them.
I figured you would just go braided line.. Also, really like the ford electric engine idea, going to research it. SL isn't huge on space.
That car will look awesome when you send it to your detail buddies !! I'm almost 60 and I'm not sure I've ever seen that color. I love it.
I too have a 1993 Camaro. The color is called "purple pearl metallic".
I looked on my 93 PPM Z, that metal 90 degree elbow in the fuel line is factory. The hose clamp is not, and there should be a little a little rubber boot over where it connects to the hardline.
If you can still buy the GM 1LE induction elbow, it is exactly the same as the original, it just doesn’t have the hole cut out for that noise reduction tube.
I love this content. Keep it coming.
Can't wait for the detail video!
Proof of work. Nice job.
Cool project and quick! Another cheap fix to stop metal lines or stainless steel lines from chaffing is to cut a rubber fuel or transmission hose down the middle and a couple zip ties and voila! Cheers from Canada!
That repair kit is pretty sweet. I served some time in a TI Automotive factory in a prior life that's pretty much the process the actual swaging machines use.
I'm not sure I would have used the clamps. I'm wouldn't be so much worried about abrasion, but stress risers in the surrounding material. Nylon isn't too terribly compressible.
Anyhow, it's _probably_ not going to burst into flames, which is really any of us can say about our work if we're honest. 😆
Trust me you need those clamps, do enough Fuel line repairs on Ford trucks with 45's and you will find leaks without them. Also that kit was a pita trying to do the same 45's. I hate Nylon fuel lines lol
Nice - you scored well on this. Looking forward to seeing it detailed. :-)
That color really pops
That’s awesome JR
Nice work. I am looking forward to the before and after detail job.
The Statue saves the day again!
Great video from JR.
Cool fix. I could never get the fog lights to last on my '96, they would continuously get destroyed by rocks. This brings back so many memories now of wrenching on that thing! lol
Super nice!
I bought replacement hatch struts for mine that have removable eyelets on the body side of the car. You just undo the clip and unscrew the strut. No longer have to undo the torx nut any more to replace it.
That fuel line kit is great! Hopefully you won’t have to use it a lot but it’s saved my ass many times when you stumble across rusted fuel lines in the middle of a repair.
I had a 94 Z in high school between 98-01. The whole time I used a baseball bat to hold up my hatch. Damn things were $60 each back then.
That thing is beautiful! That's what i want to buy my daughter...been seeing a few of them around, one i wanna ask after. That being a '93 makes me feel old as heck. I remember when those were brand new and you were the talk of the town if you bought one!
Excellent video 👍 👍
They do make a billet aluminum plug for that plastic intake resonator tube. I have one on my 97 camaro ss.
The air foil thing seems to be a plus too.
I wouldn't disconnect the water from the throttle body, it helps with fuel vaporization in colder weather.
JR Is A Legend Of Mechanic of fixing cars, trucks, motorcycles, and anything with a engine! 🙃🤑😊
Good purchase 👌..
It would be cool to do a little shoot out video between your high school camaro and this one before you sell it since there so similar, keep up the great videos!
Hi JR, I am so glad you got this sweet Camaro going again however I just wanted to share a concern with you. Do you know why the fuel line hole started to begin with? I used to own a 1995 S-10 which I purchased new in 1995 and traded back in Dec 2004. Long before I traded it, many of the under-hood plastics had become brittle from heat exposure from the engine. While I never had a fuel line issue, I did have wiring insulation and most certainly vacuum hoses that were just dried out or destroyed from the heat within the engine bay.
If this may have been what caused the initial fuel line breach in the Z28, that entire fuel line is likely very brittle and now, having a long metal connector on the inside of of the fuel line may end up creating new breaks in the line because the metal pushing against the brittle nylon line.
I will say, I think that what you did was the best possible repair for using the existing fuel lines but just wanted to share a concern that I had about it.
Congrats on getting her going so quickly!
Have a great day!
Friends used to laugh when I yelled "Clear!" before cranking the engine when more than one of us had been working under the hood. One day, someone responded "NO!" And thus saved either a finger or a hand. Not mine, but, still.
JRGO,,,your Awesome,,,watch ya from Central Florida,,,but lived in Wichita for 40 year,,,from a veteran
awesome job amazing work!!!! let me know when your considering getting rid of it!!!
The Dorman tool breaks easy that's why I switched to the SUR&R kit. The lines go on easier and just hold on with a clamp just like what's on a CV boot. Check it out sometime if you ever have issues with that Dorman kit.
I just replaced the fuel line on my Buick with nylon. All you have to do is put the end of the nylon line in hot water and you can push it onto the line.
I love the custom headliner tacs 😁
Love that car!
I remember doing a fuel filter on my mom's car in my high school shop. One of the quick disconnects shattered, so I ended up needing to cut back and extend the nylon fuel line. I remember it being a nightmare and smelling like gas for the rest of the school day. One of these vise setups would've been fantastic
Man that can brings back some good memories
Maybe the Camaro wanted to become a Firebird lol, awesome job as always fuel related fires are always SCARY!
Jr get er done ✔
Cool video
A '94 Camaro donated its LT-1 350, its 4L60E and its front clip to my "48 ford Super Deluxe Coupe (mild custom) years ago (I didn't do the swap). The gen 2 LT-1 is sort of the bastard stepchild of the 350 series of small blocks, but mine runs fine and strong. An LS swap would be cool, but for now, the LT-1 is fine.
Bought an aluminum trick flow intake elbow for the LT1 in the 96 I used to have before the LS1 swap.
Very lucky the bonnet was up when it caught fire saves a paint job.
Some of the z28's/ss had the cone of silence in the muffler to cut back in the hp as this car was in competition with the corvette.
I have a hooker aero chamber muffler on mine.
If the fuel system has a return line to the fiel tank, i believe that the return line should be checked or flush to prevent any over pressure in fuel line, which is could caused any leak (cause of over pressure)
To delete the noise tube, use a spray paint can lid...flexes and slides in there
👍👍👍💪💪Verry nice car Greats from the Nederlands 👍
That explains why the fuel lines looked different to me. Didnt realize they changed them between 93 and 94. As mentioned on the previous video, I did indeed get the whole assembly from the connectors under the driver floor to the rail. And yeah the yellow was ugly.
Loving the content! Now you have me looking for one of those cars but to no luck. How much you going to be asking for the car?
Good job JR!, if you ever want to sell the Z28 I am interested. BTW I did my undergrad at WSU where I met my wife. I used to buy cheap cars, fix them up and sell them after driving them for a few months.
Now you get to let the dude you bought it from take it for a drive again
Split loom has a convoluted past.
Glad you got her back on the road, I've always loved the silly impractical wedge shape of these 4th gen f-body cars. Looks like a poor man's Jaguar XJ220 IMO. I really think the GM designers had a bit of Lamborghini Countach influence in the design, in the crazy raked windshield, the low hood, the stupidly low seating position and overall height, those wide rear fenders. Yeah it might not look like the Countach, but both the Countach, 93-97 Firebird/Camaro subscribe to that slightly angry rubber door stop look lol.
People who work on their GM fuel injected cars. The proper fuel line orings are GP sorenson 800-9214 and 800-9215. About 5 bucks a box for the proper large and small fuel connection orings. Bags of 10. Also fit the fuel filters. Dont let clerks sell you orings from plumbing oring kits
Awesome
93 came with the 700R4....94 got the 4L60E....you can get rid of the intake snorkle by using a 1LE elbow...dont know if they are still available
I'm no expert with fuel line, but from experience with plastic water line, it's cheap enough to replace a longer section of it, farther off the engine. Use some of that new fuel line you got.
Love your channel JR I’m one of your OG subscribers back when your original Camaro was on the channel even back when you completely restored the Geo tracker whatever happened to that thing
If I had a dollar for every gas strut I witnessed JR replace.......
New engine fire brought to you by dorman
The flip flop returns !😱
Did you buy that heatgun or just one day found to be in possession of it? I have the same one but couldnt tell you when or where it came to be.
The Crispy Camaro lives again!
That is clearly the correct name for it.
JR is the man! Miss that car so much.
If I could help Watch JR Goes work on the Camero I would drink the shot of whiskey and the cold Bartle Skeets and puff on the Cannabis Cigars with him and get all schmoked up
You never want to rip the boot when you work it over! And just like Nugenix, she'll like it too.
Doing a fuel line also on my 97 Buick riviera supercharged lol
I wonder if a shark bite fitting would have worked too lol
Yay
Can you run e85 thru that nylon fuel line…..I wanna run e85 but I don’t know what’s the right material for running the fuel line…..I’m sure I heard somewhere that my rubber injection hose will not cut the mustard and that e85 eats up all the gaskets and stuff
I love F body's! Great camaro
Wow i would like to buy that thing from you JR lol
I bought a 96 z28 t-top for my first car had the engine rebuilt and a week before getting my car back from the shop I found out the title was in Pennsylvania and I’m in California and since it was my first car I didn’t know titles can’t just be transferred over , and had to sell it , I miss it everyday I want it back
This reminds me of running pex 😂
Sounds like it need lifters adjusted and exhaust manifold gaskets
If it was a Pontiac, you could call it the FIREbird.
Or a Firechicken!...lol
I really liked this one JR. Hey, do you have a brother or cousin in Spokane Washington? There is a guy in a tv commercial that at first glance, I thought it was you.
thank god you had your headlights and fog lights on in the middle of the day
Ready to flip !
Should watch some of Watch Wes Work videos, he has done the fuel line repairs for GM in some of his videos using the same tool.
Just after you started it you should have spliced in a video of a warehouse on fire and you can be heard saying.. "Well, that escalated quickly..... kidding!" :D
Call it the fireball camaro!
There was a recall issued for fuel fires on the '93 model.
Are going to do the 411 pcm conversion on the Camaro