I just added chapters to the video. Now it's easier to view what the video consists of or skip to a specific section. Soon there will be new video dedicated to the 3D printed version of this aircraft. See you soon!
Nice design flies great. Glad the hot wire software worked well. I'm learning XFLR5 a challenge for an old man like me but I think I'm getting there. Would be great to see a more in-depth video of XFRL5 and how you calculated the centre of gravity👌
Lovely project and thanks for sharing but I worry that all the small FPV Nanogoblin style drives have forgotten all their basic aerdynamics ce lectures : drag is proportional to frontal area so the thinnest strongest walls should be used on the fuselage. Expanded polystyrene is not smooth like a sailplane surface
It is shown how I cut it out. I cut the top view from the epp block and then the side view. Then I hand rounded the edges and sanded. Also, I hand-cut the hatch and the equipment space inside fuselage. Unfortunately, I did not record all of this
Awesome. Remembers me a little bit of the Strix Nano Goblin. If it's about wing design (lift vs stability), maybe the Nasa Prandlt D wing could be interesting (free profile DL on the Nasa-Homepage). But I guess nobody scaled it down yet (and kept respecting the theory behind it).
Hello, I liked the model very much. I follow you from Turkey. I could not access the dxf drawings. The site gives an error. Can you share the dxf drawings, thank you
Cześć. Jak połaczyłeś rx-a z ardu i jaki protokół wybrałeś żeby przysyłał telemetrię na radio? Mam ten sam skrypt i na razie lata po passthrough przez x8r. Teraz buduję skrzydło na elrs i będę chciał uzyskać ten sam efekt. Dzięki.
@@amoswolfe7122 Yes, you can try to catch it because the approaches are slow. I don't know yet what the weight of the printed version will be, but the print itself should weight about 120g, so I guess whole plane around 310-320g
Ground speed is speed relative to the ground, and airspeed is speed relative to the air. In this aircraft, airspeed is only a value estimated by the flight controller because there is no pitot tube here
I just added chapters to the video. Now it's easier to view what the video consists of or skip to a specific section. Soon there will be new video dedicated to the 3D printed version of this aircraft. See you soon!
Really appreciate the video of this, not enough designers do this. It's great to understand the design philosophy and flight performance of a model.
Well done. I look forward to seeing the 3D printed version
Samolot prezentuje się świetnie, widać że ktoś nie żałuje kapitału na swoje dzieła 😁
Great build. Congrats.
Came for the wing build and stayed for the foam cutter video. Would be great to have chapter markers in the videos.
You're right, I just added chapters to the video
Great video. Thanks for sharing. Hope your weekend was great, our weather is finally warming up to be nicer flying weather. Have a great week.👍👍👍💯💯💯
I'll reapect the language change on the channel. Great video, waiting for the next one!
Very nice! Link is broken, page not found
Are you planning add to shop foam kit? Would be great
Nice design flies great. Glad the hot wire software worked well. I'm learning XFLR5 a challenge for an old man like me but I think I'm getting there. Would be great to see a more in-depth video of XFRL5 and how you calculated the centre of gravity👌
Lovely project and thanks for sharing but I worry that all the small FPV Nanogoblin style drives have forgotten all their basic aerdynamics ce lectures : drag is proportional to frontal area so the thinnest strongest walls should be used on the fuselage. Expanded polystyrene is not smooth like a sailplane surface
Great Job :-)
did you ever make the model available to buy ?
can you please share the dxf drawings?
Muy bueno felicitaciones, tienes los gcode para la cortadora de espuma? ya que los stl para imprimir en 3da ya te los compre!! gracias!!1
ganz große klasse, super
Great video thank you.
You're brilliant mate thank you!
Looks professionally made! Btw your link to the plans is not working.
Dude - great video but you need a pop screen for your mic or a 75hz high pass - my subwoofer just kicked a hole in the wall.
I like to see how you make a fuselage. any video how you make it?
It is shown how I cut it out. I cut the top view from the epp block and then the side view. Then I hand rounded the edges and sanded. Also, I hand-cut the hatch and the equipment space inside fuselage. Unfortunately, I did not record all of this
Great video. Would it be possible to scale this up to human carrying size? I see canards but not planks, wondering if there’s some reason for that.
Really cool plane, are there plans for this?
mega materiał !
Verry nice 🎉
Awesome. Remembers me a little bit of the Strix Nano Goblin.
If it's about wing design (lift vs stability), maybe the Nasa Prandlt D wing could be interesting (free profile DL on the Nasa-Homepage). But I guess nobody scaled it down yet (and kept respecting the theory behind it).
eclipson-airplanes have a Prandtl wing in their 3dprintable airplane collection.
Amazing!
realy nice OSD set up! what Font did u use?
Is this possible with foam boards?
Where do you buy epp foam ?
hey hi the planes is great, where can i find the design files for the foam version
Hello, I liked the model very much. I follow you from Turkey. I could not access the dxf drawings. The site gives an error. Can you share the dxf drawings, thank you
Good job I love it
Cześć. Jak połaczyłeś rx-a z ardu i jaki protokół wybrałeś żeby przysyłał telemetrię na radio? Mam ten sam skrypt i na razie lata po passthrough przez x8r. Teraz buduję skrzydło na elrs i będę chciał uzyskać ten sam efekt. Dzięki.
Latam na ELRS, jest to widget Yaapu. Konfiguracja jest opisana na ich Githubie.
Whats the stall speed?
Below 25 km/h
@FLIGHTORY so in theory you could handlaunch and catch it?
What's the weight of the 3d printed version?
@@amoswolfe7122 Yes, you can try to catch it because the approaches are slow. I don't know yet what the weight of the printed version will be, but the print itself should weight about 120g, so I guess whole plane around 310-320g
What kind of VTX do you use ?
Walksnail, as shown in the video
What is the diiference between ground speed and air speed ?
Ground speed is speed relative to the ground, and airspeed is speed relative to the air. In this aircraft, airspeed is only a value estimated by the flight controller because there is no pitot tube here
wind is the difference :)
which FPV hardware did you use?
Walksnail, as shown in the video
@@FLIGHTORY did not notice, thanks for the reply!!!
Is this possible with foam boards?
Is this possible with foam boards?
Is this possible with foam boards?