@@appleejack I discovered the way!! if you look just below the password box, you'll see the "automesh" option. That will allow your ESP8266 using the same SSID and password of your router. So the steps you have to follow are: 1) You put your SSID and password of your router. 2) Check the "Automesh" option. 3) Click connect. And... You´r done!! Thus, you´ll have a real mesh network!
Good video. Thx I have two questions. 1. I have 80 mbps speed at home. Will it provide the same? 2. How far can we place it away from the router, to get better reception? Thx in advance
Update with my another ESP8266 Nodemcu i have sucessfully finished all the steps correct connected it to com 6 but for some reason after the actual wifi is connected it still shows not connected and when i am trying to reset i am not ale to help me
Hello. The question is about the ESP D1 mini pro amplifier for wifi range. Uploading is correct after connecting to ESP, enter the network name and password, press connect. A setting change appears, reconnecting to ESP, and no changes have been made. ESP is in the same state as when it was first started. When I enter changes to AP, the changes are saved. But I still can't connect ESP to my network.
Nice one. Thanks. I have tried it and found the signal increased and could work with laptop setting it as metered connection. In Mobile it shows connected but no internet. Is there any solution? Thanks in advance...
Heyy bro... Tell me one thing my wifi has a cyberroam login portal in which we always needs to login, then at that place how we can use this.... I mean my wifi doesn't have a fixed login password....As you know every colleges and schools have same wifi type and that of login type in which students use roll no as username and password.. Tell me a how to use this repreater at that wifi.. please reply or make a video tutorial on it
@TECHNO TECH i have login id which is my roll no and pwd which was also roll no but i have changed... Every time i need to login with my id and password
nothin you can do kid cause the further your repeater is from the wifi the slow your speeds going to be its just amplifying a weaker signal therefore giving you a slow transmission of data the guy got a good speed cause he was much closer to the wifi pay abit extra to get a proper extender
Sunday morning is now "VIral Science time". I really appreciate your videos. they are so cool!
The Router Config page was especially helpful. Try to slow down the mousing a bit though.
very nice and non-costy project ,bro keep it up
hey, it works! still gotta do that little soldering trick to make the external antenna functional, but still great. thank you!
Hello how many mbs do you get is it worth the try or the speed is not that good ?
Thank you Sir.
Great video! Is it possible creating a new access point that simply repeats the signal from the same home wifi?
@@appleejack I discovered the way!! if you look just below the password box, you'll see the "automesh" option. That will allow your ESP8266 using the same SSID and password of your router.
So the steps you have to follow are:
1) You put your SSID and password of your router.
2) Check the "Automesh" option.
3) Click connect.
And... You´r done!!
Thus, you´ll have a real mesh network!
@@appleejack I've tried it but it doesn't work... Have you tried it?
@@vidadeingeniero3350 any update on it?
@@kazemab i ended up by buying tenda nova mw3 which is a real mesh wifi system
Great sir
Try sir but after flash no network found what to do please explain
Hi there... the flash tool link you given has no longer the version you used... could you help?
it also works on the chip from the drone?
Good video. Thx
I have two questions.
1. I have 80 mbps speed at home. Will it provide the same?
2. How far can we place it away from the router, to get better reception?
Thx in advance
Only 8 clients can connect and there also bandwidth limitations due to esp's factory settings
Does it work for open/public wifi ?
You will get repeater speed below 5mbps as it's support 2.4Ghz not 5Ghz don't expect speed more than 5 mbps
It is great,i am using it from last 1 years
hey how are the speeds, i have 15 Mbps but from this esp8266 I am getting around 4 Mbps. Do you have a fix for it?
Sir aapake pass konsa laptop hai
Update with my another ESP8266 Nodemcu i have sucessfully finished all the steps correct connected it to com 6 but for some reason after the actual wifi is connected it still shows not connected and when i am trying to reset i am not ale to help me
Hello. The question is about the ESP D1 mini pro amplifier for wifi range. Uploading is correct after connecting to ESP, enter the network name and password, press connect. A setting change appears, reconnecting to ESP, and no changes have been made. ESP is in the same state as when it was first started. When I enter changes to AP, the changes are saved. But I still can't connect ESP to my network.
Is there also a linux flash tool available for this or maybe upload via arduino ide? tried but couldnt find a file to open in arduino ide..
Hi, thank you for this nice project. When I set up and tried to connect to my "Repeater" access point it shows, "No Internet, Secured". Please advice.
Same happen with me
Set as metered...
plz tell me, After flashing bin file, can i use nodemcu with Arduino ide?
Nice one. Thanks. I have tried it and found the signal increased and could work with laptop setting it as metered connection. In Mobile it shows connected but no internet. Is there any solution? Thanks in advance...
doesnt seem to work with drone like tello even portforward the ports, can control but no video
can you plz make a video on how to reset esp8266 or how to flash other softwares in already flashed in esp8266
After pressing start button it doesnt show anything after 30 min and also it doesn't show any error.
Heyy bro... Tell me one thing my wifi has a cyberroam login portal in which we always needs to login, then at that place how we can use this....
I mean my wifi doesn't have a fixed login password....As you know every colleges and schools have same wifi type and that of login type in which students use roll no as username and password.. Tell me a how to use this repreater at that wifi.. please reply or make a video tutorial on it
@TECHNO TECH i have login id which is my roll no and pwd which was also roll no but i have changed... Every time i need to login with my id and password
@TECHNO TECH ok thanku very much
@TECHNO TECH can i get your cont info like whatsapp..
Will the devices connected to the repeater and the router be in the same lan ? why cant we give it the same name as the router SSID and Password?
Nope, all of the yt don't know the difference between a repeater and a extender. It is all the same for them....
Excellent.......thank you so much!
i am getting com 3 error so i did with com 6 but i a not getting myap wifi option please help me I did this with the mini version
Is it true the original Wi-Fi name can only be one word (not a two word name like”smith guest”?
Another great video, thanks for sharing.
재미있게 보았어요
How to Convert it back to normal esp8266 module firmware...
bro i done it correctly and it worked but now i forgot the password of the created network. what should i do. pls hlp me out
not show in wifi networks esp8266 ssid. Please help
How to fix my home wifi is about to 8mpbs , but my repeater is 1mbps only ??
same
nothin you can do kid cause the further your repeater is from the wifi the slow your speeds going to be its just amplifying a weaker signal therefore giving you a slow transmission of data the guy got a good speed cause he was much closer to the wifi pay abit extra to get a proper extender
V good it work great job well done
Bro make button controlled home automation of 10 devices please bro
how to change mac address of the extender
Worked okay kinda slow. Thanks for the turorial though
Nice project for everyone
Thank you very much for this vedio
Can we make a mesh network using esp modules.
For multi storeyed home it is difficult to remember many password
Give all the repeaters same SSID and Password, smartphone automatically connects best wifi
Sir we can use esp01 module
hi i follow all the steps but connectwithout secure internetWhat is wrong?a question I can put the name that I wantin ssid xxxxxxx
help, the flash tool doesn't recognize none of my com ports
Bro I did same project but if I check network speed it is coming 0.6 to1.00
Really nice idea
I tried this project but not even getting 200kbps repeated speed. Please help🙏
For me wifi signal is not showing... What to do ??
Am I only one facing this issue??
I had the same problem, did you solve the problem?
Can with use android?
Thank you 🇧🇷
Cannot find new access point MyAp after flashing
Can we do without pc
Can we use ESP-01 8266 module for this project ?
ESP-01S yes
@@gohan3243 WeMos D1 mini pro? why I can put a long range external antenna
esp8266 mines not even connecting on internet
Dude, are you from India?
Yes
@@ViralScience after upload the code unable to find wifi ssid of my nodemcu
Great!
Super Bro...
Successful sync but no wifi showed after I followed the Instructions 😢
Maximum WIFI speed on that repeater is 5mbps/5mbps. Its cheap but its slow
perfect why I habe only 5 Mbps and too in my school
Wow nice
great good job
Sp thanks
supper brooo💚🔗
What's the range
Bro can you make signal booster
It doesn't work it's not connecting to the internet
Please help me ... how to contact you
Its showing as fary link and 192.168.4.1 not opening
It means flashing of the files is not done properly, thats the reason you are not getting MyAP
@@ViralScience I am having the same problem. Is there another way to make sure the files have flashed correctly?
I managed to get it working using this method of flashing - ua-cam.com/video/MHrm7axsImI/v-deo.html
Can I use this in a public wifi with log in portal? #respect
Is it possible to use ESP32 cam as a repeater. thanks
How to change the 192.168.4.1 to 192.168.14.1 which is my network IP ?
Its is set to 192.168.4.1
@@ViralScience Do you mean to change the IP of my router, if yes it's not a good idea for me
Can you make a c programing tutorial piz piz piz i need it piz i want to learn
🤘🤘🤘🤘🤘
Mobile setting kora jaby
With witch module i can make mobile controll drone piz piz reply piz
You can use any ESP WiFi module so you can control it with your smartphone
Sir ya video Hindi banaen
😍😍🤟🏼🔌🔌
🤝🤝🤝👍👍
its not working bro
It should work, i have made it 2 days ago.
down/upload 3/3mbit seconds... buy a mikrotik hub lite.. much better then this
No speed
how to make arduino based service robot with line follower
please make like video
Already made multiple videos on this
@@ViralScience please video link
and please all requests how to make home work marcin it is very important please try...
@@ViralScience Yes Pleas vi make home work maicen please...
Please 🥺🥺🥺🥺
This project upload.ino file