I don't understand a word you are saying, but at 5:23 mark you zoom in and I can see this controller does have the JH16 Hall effect modules which are the latest iteration and the ones I am after, so thanks for the video !
The AXYB Buttons are very soft and not clicky like the Xbox Controller. Is there any solution? Is it safe to remove the Rubber Pad beneath? Or should I put like a small peace of paper on there?
@@DOCKER3 I think you should connect dongle to the pc first. It would be flashing frequently. After that you should turn on controller (check the switch on its back - it should be in 2,4g mode). Once it is done you need to push the button on dongle so both dongle and controller pair. This is how it worked for me. If everything is done right the diode on top of dongle would be flashing constantly
Brother, good morning, excuse me. I ordered this controller and the thumbstick or lever on the right side broke although it is still functional. I would like to replace it with a new one because it makes a slight noise and feels a little strange. Do you know where I can get them or from any other brand that do they fit? Thanks in advance.
Hello, i have this G5 pro but the RB has broken ( fall from 1st floor) and joystick broken too. Where can i buy and replace that? Please answer me as soon as possible
I tried to fit a 523450 battery, but it didn't fit by a few millimeters. I want to try a 602560 battery, I think it will work. No matter what size it is, you'll have to cut out some of the internal plastic parts of the joystick (parts with no functions, they look like they're from another project).
That tiny piece of plastic, which is supposed to hold the pressure of the triggers to prevent them from hitting the transistor of the hall sensor, is pathetic. One drop to the floor and the plastic piece inside broke, causing the trigger to hit the transistor and rip it off the board. I have managed to repair the board, but I am going to add A TON of epoxy behind that stupid, undersized piece of plastic because even normal use can rip that crap off and permanently damage the controller. This is a critical point of failure in the design of this controller.
Very nice teardown! this video is going to be very useful for customers when they need to replace something in the future!
I don't understand a word you are saying, but at 5:23 mark you zoom in and I can see this controller does have the JH16 Hall effect modules which are the latest iteration and the ones I am after, so thanks for the video !
The AXYB Buttons are very soft and not clicky like the Xbox Controller. Is there any solution? Is it safe to remove the Rubber Pad beneath? Or should I put like a small peace of paper on there?
hello everybody!
Do you sell analogues for replacement?
Where’s the software it’s been 7 months
Where can I buy replacement buttons? I can't find them anywere
I also need replacement buttons
Regarding product issues, you can consult our store's customer service, and our store can view our video introduction
@@Machenike I have sent a email and got no response, can you give me a link?
@@Machenike I need the RB button, the plastic just break
@@Machenike I need RB button too
Are those mechanical switches surface mounted? if you then where we can buy the replacement?
they are very easy to buy, just type mouse microswitches and get similiar sizes
Hi, I recently bought a G5 Pro, it works with Bluetooth, USB cable, but it doesn't work with the 2.4 dongle, how do I find support?
I have the same problem. Are there any solutions or is it a defect?
@@DOCKER3 I found the problem, it was the lack of the dongle 2.4 firmware update
@@loyaltechnology5764 please tell me how this can be fixed? I updated the firmware from the site - it didn't help. thanks
@@DOCKER3
I think you should connect dongle to the pc first. It would be flashing frequently. After that you should turn on controller (check the switch on its back - it should be in 2,4g mode). Once it is done you need to push the button on dongle so both dongle and controller pair. This is how it worked for me. If everything is done right the diode on top of dongle would be flashing constantly
Update filmeware, site chinese, no global, work for me guys
What a clean teardown
I'm buying it 😮
Brother, good morning, excuse me. I ordered this controller and the thumbstick or lever on the right side broke although it is still functional. I would like to replace it with a new one because it makes a slight noise and feels a little strange. Do you know where I can get them or from any other brand that do they fit? Thanks in advance.
I have the same problem with that button. Did you resolve it?
Is it possible to turn off the backlight completely?
Yes,in driver
Hello, i have this G5 pro but the RB has broken ( fall from 1st floor) and joystick broken too. Where can i buy and replace that? Please answer me as soon as possible
I also need replacement buttons
Hello. What is the battery model name. I want replace it. Because my discharge very quickly 2-3 hours.
Quando descobrir me avise
602248 3.7v 600mah
conseguir mudar de bateria?
tell me where can I buy a large-capacity battery to fit this gamepad?
tell me where can I buy a large-capacity battery to fit this gamepad?
I tried to fit a 523450 battery, but it didn't fit by a few millimeters. I want to try a 602560 battery, I think it will work. No matter what size it is, you'll have to cut out some of the internal plastic parts of the joystick (parts with no functions, they look like they're from another project).
Where's the software?
please make disassemby tutorial for sades runix g80
Где можно приобрести стики к этому геймпаду? Помогите
Тоже ищу....ничего нет, ни стиков, ни передней панели, ни аккумулятора....
RT button was fracture. How to repair?
I also need replacement buttons
quality good of bad?
Very good. I have 1
make a video opening thunderobot g60
Чёткий джой, иду купить
That tiny piece of plastic, which is supposed to hold the pressure of the triggers to prevent them from hitting the transistor of the hall sensor, is pathetic. One drop to the floor and the plastic piece inside broke, causing the trigger to hit the transistor and rip it off the board. I have managed to repair the board, but I am going to add A TON of epoxy behind that stupid, undersized piece of plastic because even normal use can rip that crap off and permanently damage the controller.
This is a critical point of failure in the design of this controller.
⌨️🖱📱
Flydigi Direwolf 2 better!
RB/LB switchs stopped working, they are not clicky anymore. Dont buy this controller.
lmao 2$ for each switch = 4$ + 5 mins to replace them then all problems r done. I love mechanical switch
@@Su4shisususu where u buy them? Besides LB/RB plastic is very fragile. They broke.
@@OliverMendoza2 u can find Omron B3F-3100 mouse switch
Где можно приобрести стики к этому геймпаду? Уже устал безуспешно искать их по всему миру
U can use trigger behid ?
Wow microswitches, someone use brain in china i see