Dc control supply earthing system |110v dc system how we getting 55v positive or negative to earth.

[@Biginjapan85]

Many thanks for the video. It cleared many things up! all the best

[@varadharajanelectricalengi5954]

🙏😳🌍🌏🌎😲🙄 6:53 AWESOME EXPLANATION ☢️THALA🙏 9:51 SUPER THALA

[@baranitech]

thank you and welcome

[@amolmane5586]

In case postive to ground showing +70v and negative to ground - 40 v . What that means , i observed such type of volatge in many of the substations

[@baranitech]

it look like negative earth fault is there or there should be problem in mid point earthing system thank you.

[@erfan_muhammad]

Hi sir, thanks for the video. this is midpoints/center point earthing.
1.what is the another earthing type? positive connection to earth or negative connect to earth.
2. i notice that the most substation using this type of connection. while for the power plant with alot of instrumentation using negative connection to earth. im wondering why.
3. i think this is the best connection to protect instrumentation/plc/ vfd
thanks in advance for your reply.

[@AnandKumar-ym9yw]

Thanks you cleared my doubt.

[@baranitech]

Your most welcome 🙏

[@Mhdmnr68]

Thanks dear ,very useful explanation,also one doubt this mid point normally taken from battery or in charger in substation?(because both are conected in Parallel)

[@rajeshtk1246]

The shown diagram shows solid earthing of the mid point of the battery bank. If the mid point is earthed solidly, there is still path for half the fault current that would have been present if the battery set's -ve was earthed.
The correct way to earth the battery system is:
Earth the mid point of the battery bank via a high resistance in the charger. This way, the voltage will be halved. Also, the return fault current if any, will have to overcome the high resistance in the return path to the mid point of the battery bank which earthed as a reference point.

[@yousefalotaibi8343]

Could you explain the effect of DC positive or negative eath fault on the trip circuit ? And how can that cause malfunction for protection relays ?

[@Biginjapan85]

@@baranitech Did you ever make the earth video?

[@petarsimic2303]

Thank you for good videos

[@SunnySingh-ei3rp]

Dear sir
In our substation DC grounding is not done, what is the advantage and disadvantage of this.

[@SunnySingh-ei3rp]

@@baranitech yes sir we have battery charger

[@naveenchaddha2802]

Sir please explain
Why 11kv incoming panel Y phase PT Ground in Becomake panel

[@baranitech]

i am not able to understand . if you have schematic please share to my email id i will check for you.

[@gurpreetsinghee]

Any method to find out dc leakage in grid sub station sir?

[@baranitech]

your asking about DC battery leakage sir.

[@narayananbiju3224]

For a full battery bank earth system of 30v DC system the phase to earth voltage is 30v,but the phase to earth voltage will be zero volts.

[@baranitech]

Positive to earth or negative to earth

[@erfan_muhammad]

i dont understand the question.. do you mean
+ve to earth = 30vdc
-ve to earth = 0vdc. interested to understand

[@nilamanijena6904]

Plz give a lecture on battery maintenance.

[@a.k3771]

Thanks Sir

[@baranitech]

Welcome

[@yousefalotaibi8343]

Thank you

[@arifmehmud5677]

thanx

[@vigneshwarselva9276]

the metal scale is not connected to ground.. then how it is acting like earthing, someone pls explain..?????

[@baranitech]

Very good question. This metal scale is just explanation for potential dividend( just like in actual cases). Thank you for your question

[@pankajrastogi6834]

Negative to earth will be -55 bhai

[@baranitech]

negative to earth 55 is done on batter charger Unit thank you for comments bro.

[@Biginjapan85]

Many thanks for the video. It cleared many things up! all the best