First of all you don't know how to set up the car ! The springs are fine you should have set up tools (like the ones from hudy) and check the ride height the down stop, camber and toe out for the front wheels ! Then you mount the body and test it ! ! Also the components motor/esc/servo you used are total garbage and you wont have a good experience firstly because of them and secondly because of the wrong setup ! The car is fine you dont know what to do with it ! Also the parking lot floor is nowhere near good enough as a proper racing surface of a track ! This is not a review ! If you need help let me know !
Thanks for your feedback back, the point of the build is cheapest possible electronics, my goal is just to get to the rc touring experience, with minimal budget (left over parts from other projects), $140 usd car need a cheap setup, instead of spending for a tamiya TT02 kit, with this price of chassis i want to experience the type of feel of the car, I can’t do serious racing because i no good under pressure, and average cost for setup station would cost more than the chassis. Anyway Thanks for your input.
For your easier going into the hobby there is no cheap ! Money rules !If you dont have money for the best parts you wont have a good expirience ! Trust me now and you wont regre it ! Tamiya is a million percent worst than this one ! It dosent matter what it cost i am telling you again ! If you want actual budget tools, there are some choices other than hudy with their compromises ! I can help you make a video but this one is all wrong ! Some people or more people will see it and this differently for this car ! I have raced it and my lap times were really close to my xray t4 21 with the same electronics ! See the common ground between the 2?ELECTRONICS !
That parking garage looks like so much fun to drive around! I'm considering one of these chassis.
Nice unboxing. Where did you order it from?
Hi thanks, let me check for US consumer, usually Aliexpress, is willing to get back to you asap
campaign.aliexpress.com/wow/gcp/sellerInfo/index?sellerId=221382427&shopId=4408041&spm=a2g0n.store_m_home.shopHead_8739260.4
@oliverstoys8411 thanks for the info going to check it out.
Just subbed
Recommended video R3G ua-cam.com/video/UNIZnlMGIcs/v-deo.htmlsi=QLi6dils-nxTb_XX
First of all you don't know how to set up the car ! The springs are fine you should have set up tools (like the ones from hudy) and check the ride height the down stop, camber and toe out for the front wheels ! Then you mount the body and test it ! ! Also the components motor/esc/servo you used are total garbage and you wont have a good experience firstly because of them and secondly because of the wrong setup ! The car is fine you dont know what to do with it ! Also the parking lot floor is nowhere near good enough as a proper racing surface of a track ! This is not a review ! If you need help let me know !
Thanks for your feedback back, the point of the build is cheapest possible electronics, my goal is just to get to the rc touring experience, with minimal budget (left over parts from other projects), $140 usd car need a cheap setup, instead of spending for a tamiya TT02 kit, with this price of chassis i want to experience the type of feel of the car, I can’t do serious racing because i no good under pressure, and average cost for setup station would cost more than the chassis. Anyway Thanks for your input.
For your easier going into the hobby there is no cheap ! Money rules !If you dont have money for the best parts you wont have a good expirience ! Trust me now and you wont regre it ! Tamiya is a million percent worst than this one ! It dosent matter what it cost i am telling you again ! If you want actual budget tools, there are some choices other than hudy with their compromises ! I can help you make a video but this one is all wrong ! Some people or more people will see it and this differently for this car ! I have raced it and my lap times were really close to my xray t4 21 with the same electronics ! See the common ground between the 2?ELECTRONICS !