🔴 Concrete of Column | Taking Off Quantities | Part 3

Regulation of Standard Method of Measurement in Section F: Concrete Works.
1. Shall be measured in cubic metres.
2. The volume of concrete is obtained by calculating the cross-sectional area of the column multiplied by the height of the column. A column height is taken entirely from the top level of the ground beam to the top level of the upper beam.
3. Isolated columns and isolated casings to steel columns which shall be deemed to include kickers shall be each given separately. Isolated columns shall be so defined when their length on plan does not exceed four times their thickness.
4. Walls which are deemed to include kickers, attached columns and pilasters, stating the thickness. Retaining walls shall be so described and given separately.
5. Where the thickness is required to be stated in accordance with this clause, the classification shall be in one of the following categories:
Not exceeding 100mm | 100mm-150mm |150mm-300mm
Exceeding 300mm
#KKChannel #Aben # ConcreteOfColumn

[@ts.khairolbinkamaruddin6257]

Untuk video-video tutorial taking off quantity melibatkan bahan binaan yang lain. Sila rujuk playlist ini: ua-cam.com/play/PLgjYVh77tG_FGoG7-uGqnOUe4Bo-KCvZs.html

[@aizat7891]

Terima kasih encik

[@ts.khairolbinkamaruddin6257]

Terima kasih. Moga bermanafaat.

[@chintarisa]

Very good content...

[@ts.khairolbinkamaruddin6257]

Glad you think so!

[@nursahira5695]

Thank you sir ✨

[@ts.khairolbinkamaruddin6257]

You're most welcome!

[@normanhaqeem608]

Good explanation 👍

[@ts.khairolbinkamaruddin6257]

Thanks 🙂

[@jup1250]

Salam cik..bole tak buat tutorial pengiraan concrete roof beam pulak..t.kasih

[@ts.khairolbinkamaruddin6257]

Concrete roof beam sama sama dengan concrete ground beam.
Cuma roof beam tak perlu kira lean concrete. Yang lain semua sama.

[@ルナ_レイ0905]

Thank you so much encik. Definitely easy peasy lemon squeezy.

[@ts.khairolbinkamaruddin6257]

You are so welcome! Yeah...You got it!

[@amirabalqis616]

Good video 👍🏻 thank u sir ☺️

[@ts.khairolbinkamaruddin6257]

Thank you too

[@4birinnabintiibrahim995]

kalau drawing tak sediakan tinggi column nak buat mcm mana ???

[@ts.khairolbinkamaruddin6257]

Maknanya drawing tak lengkap. Perlu minta drawing lengkap untuk buat takking off. No short cut.

[@qurratuaini6916]

saya guna c1: 0.25 dan c2:0.30. total yang saya dpt 2.79m3. terima kasih encik

[@ts.khairolbinkamaruddin6257]

Wow. Tahniah! Sama dengan pengiraan saya. Terbaik!

[@nadhirahsharoslan3381]

Tq sir😍

[@ts.khairolbinkamaruddin6257]

You are most welcome!