Just take the lock cylinder out by pulling the roll pins take the lock cylinder out pull the Fing wafers and tiny springs out put back together. Slapper all back together and never have this problem again. The transponder in the key is the trick to getting it to start anyway so why f with the stupid never ending failing wafers and the key that is constantly wearing.And yes The stearing wheel still locks when you turn it off and pull the key.You can take your key out while its running too which is very convient at times. I put one full rap of black electric tape at the end of the cuts on the key so that the key doesnt fall out of the lock easily. Just did this today and it works like a champ. Sorry locksmith's but this nightmare is BS AND I FOUND THE CURE. Save yourself a tow and 200 bucks buying new keys blah blah
why you don't replace only the cylinder lock or after pulling out take it to lock smith for $30 to clean the lock .you make so complicate video for no reason.it so stupid video.
Your English is pretty good. Thanks for the video.
Excellent video perfectly explained, thank you very much
Where did you order the second key from? The one that you put the original transponder into? Can you please add a link?
Looking at the key it looks like he got it from timpsons locksmiths about £20
thankyou very much 👍
Man y como quitaste los pines q abrazan el switch
Con huevos porque estan bien apretados
wat transponders used
Just take the lock cylinder out by pulling the roll pins take the lock cylinder out pull the Fing wafers and tiny springs out put back together. Slapper all back together and never have this problem again. The transponder in the key is the trick to getting it to start anyway so why f with the stupid never ending failing wafers and the key that is constantly wearing.And yes The stearing wheel still locks when you turn it off and pull the key.You can take your key out while its running too which is very convient at times. I put one full rap of black electric tape at the end of the cuts on the key so that the key doesnt fall out of the lock easily. Just did this today and it works like a champ. Sorry locksmith's but this nightmare is BS AND I FOUND THE CURE. Save yourself a tow and 200 bucks buying new keys blah blah
I know this is old but can you elaborate for someone not mechanically versed? Having this problem now
@@Thegoodneighbor_ I did.. read what i wrote several times and watch vids on this subject matter
why you don't replace only the cylinder lock or after pulling out take it to lock smith for $30 to clean the lock .you make so complicate video for no reason.it so stupid video.
wat transponders used