Це відео не доступне.
Перепрошуємо.
Cheap battery Impact Wrench 1/2'' from Lidl 400Nm
Вставка
- Опубліковано 10 бер 2022
- Impact wrench 1/2" from lidl Parkside 400Nm
4ah battery
#batteryimpactwrenchlidl
#impactwrench
#parkside
#18v
program do obsługi warsztatu:
e-warsztat24.pl - zniżka 10% na zakup programu Użyj hasła: 4wheelsbydavid
Link do grupy motoryzacyjnej:
groups/45816...
link do strony:
/ 4wheels-by-david-10157...
email: 4wheelsbydavid@gmail.com Macie pytania??? śmiało można pisać :)
Amazing review my man, very thorough. Keep it up!!!!!!
thanks Pal
A great video, I was thinking of buying one of these drills, but wasn't sure how good it would be, you have demonstrated how good they are for the money, I will have no problem in buying one now, thank you.
you welcome
It's very good.
I have it, and it's strong as hell.
A good Concise vid 👍🏻🇬🇧
thanks Pal
regards and welcome to subscribe my channel
Thanks for this review!
you welcome
Great review I'm buying one after that demo
thank you!
Interesting to note that they can vary in performance?
Yes it's very good and does the job
thank you for your comment
Thanks great explanation
thank you Pal
I have it and it works great.
I bought it not for £60, but for €40, new, including 4 sockets, 1 4ah battery, and charger!
well done!
regards and welcome to subscribe my channel
No messing about review,cheers 👍
thanks
Thank you for the video.
thanks for comment
regards and welcome to subscribe my channel
Great review, Aldi and Lidl do some half decent tools occasionally.
yes usually fair price for a tool
Great review ❤
Thank you
Informative video
thank you, Pal
Super potrzebuje odkręcić coś w rowerze
może akurat się przyda :)
pozdrawiam
Very well done! seems like this is way better than the cord version of parkside. For changing wheels is not worth to buy brushless tools like dewalt or makita or milawalkee so I'll give it a try. BTW the cord version is absolutely junk
thanks for Your comment and welcome to subscribe my channel
Good to know that as I was thinking of getting that one.
Thanks for your efforts, good advice. If you're a pro mechanic, then probably buy a pro tool. Very few of us are, so this will likely serve well enough.
Thank you
regards David
Interesting to compare your video to others, as these wrenches seem to vary hugely in performance?
just each test and bolt different 😅
Thanks for the review... Now I am going to go pick one of these up
You welcome
Hi.
Very good video.
My car tyre torque must be 105 NM by driver manual book.
So is it OK if i set the wrench for 100 NM?
yes but always check manually after works with torque wrench
regards
Well done!
Thank you
The sockets don't stay on the gun lol 😂.I bought one still have it but you need a pin it's hassle I am going to upgrade
cheap price for a tool is not the Dewalt or Milwaukee but does the job
@@4wheelsbyDavid I have the smaller one aswell its brilliant and punches above its weight. The socket not attaching on the bigger one puts me off I noticed you where holding the socket with youre fingers.its just nice too hear that socket click on.
Does this impact have 5 levels of torque on a button ?
4 levels
@@4wheelsbyDavid is it a button function?
You are holding that impact socketb
is not that bad 😄
Alright Dave,
thanks
Hmm I'm not convinced about this tool I have a draper impact gun and it's three times the price of this one but struggles past 250nm..
price is low so I think the best tool for this money,
we can't compare it to Dewalt or others which cost 5 times more. Is not strong but does the job.
@@4wheelsbyDavid I've just ordered a Kielder Impact gun for £300 it's well over 800nm so thinking this should be tipping into DeWalt territory
I find this video strange. I have one. Bought it due to price & reviews. I've used it a few times and I find it's not great. Never been able to remove wheel nuts with it. I've always had to loosen them manually first which kinda defeats the point. Ironically, I've used it to tighten wheel nuts & immediately tried to remove them again - wouldn't do it. It has adjustable torque settings so I used a lesser one to tighten & a stronger one to try to remove. No joy. Don't waste your money tbh. Mine now sits in its case on a shelf.
Hi
Just You need to remember that is tool for £60
dewalt's battery cost about the same price. So for £60 You getting tool + battery + charger I think is fair price, of course is not strong like a tool for £300😬
but even if you need to loosen the bolt first is better than spin the bolts by hand.
regards
Jakie tanie i dobre kliucz kupić
DeWalt DCF891
Tani i dobry
Pozdrawiam i zapraszam do subskrypcji kanału
Buying new batteries and chargers put me off especially when I have makita and ryobi already. thanks
yes that right, better is just stay on one brand if You happy.
regards and welcome to subscribe my channel
My brother bought two and both of them didn't work LOl
😬 happens, just return them
regards
Is there anyone who’s bought this tool and can give his opinion? :) it’s hard because why would you watch this video after buying, hehe😂
yes that right 😅 but not everyone 😅
I am thinking of buying one 😁
You will like it for sure. I also was thinking for a long time of buying one and after did it, I can highly reccomend it!
I have one. Bought it due to price & reviews. I've used it a few times and I find it's not great. Never been able to remove wheel nuts with it. I've always had to loosen them manually first which kinda defeats the point. Ironically, I've used it to tighten wheel nuts & immediately tried to remove them again - wouldn't do it. It has adjustable torque settings so I used a lesser one to tighten & a stronger one to try to remove. No joy. Don't waste your money tbh. Mine now sits in its case on a shelf.
I bought one, and it works great for the money 🎉
A ja tam wolę po polsku xd pozdrawiam
jest polska wersja na moim kanale
pozdrawiam i zapraszam do subskrybcji
Its clumsy and looks like drills with wires
thanks for your opinion.
You know of a less clumsy 400Nm one for 60 quid? No I isn't think so. Post your apology below. Thank you. Great video
thanks for your comment ;)
@@bobbyfischer6786 i know with 800nm (just order it)which are smaller size similar to those of DeWalt and Milwaukee and thst means not clumsy bigg butt drivers which you cannot fitt in confined spaces
@@Mr11ESSE111whats the model my friend?