i have no idea about how to do this stuff or what i am looking at. I am interested in buying the sound and light board assembled or would you be able to tell me exactly what to get? i followed the links but there are so man esps and bread boards etc i have no clue what to look for.. please message me ty
You are amazing! Can this module be connected with the throttle wires of the electric bike and we can get the engine sound by connecting pam8403? If yes then please tell me how, thank you. Good luck with future videos.
HELLO FRIEND, EXCELLENT PROJECT CONGRATULATIONS, COULD YOU HELP ME RESOLVE A SMALL NOISE IN THE AUDIO OF THE ESP32, THE ENTIRE PROJECT WORKS WELL, BUT THERE IS THIS NOISE IMITATING THE SOUND OF A HELICOPTER THANK YOU. IN VERSION 6.4 IT WORKS WITHOUT NOISE
Hi buddy is it possible to adapt this for a static model? As an example a aircraft or a diorama ? I can see there are many features here that I could probably use in static displays.
Pin 2, according to the sketch. You have to use an IRLZ44N Mosfet and a freewheel diode to drive it. See schematic: github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Thank you. Yes, of course you can. My King Hauler has about 50 LED and everything is connected to the sound controller: www.rc-modellbau-portal.de/index.php?threads/tamiya-king-hauler-mit-hammer-sound.7450/page-3#post-258083
@@bologanbogdan6634 Der MAN TGX ist schon dabei. Einfach das entsprechende Fahrzeugprofil wählen. Sobald das SMD Board Design bestätigt ist, wird es ev. Boards zu kaufen geben. Ist aber noch nicht sicher. Unbestückte Platinen bestellen und selber bestücken ist ja jetzt schon möglich. In diesem Thread sind viele Nachbauten zu sehen: www.rc-modellbau-portal.de/index.php?threads/esp32-arduino-rc-sound-und-licht-controller.7183/page-28#post-258465
hi, i made the new board and connect the shaker to the corner 5v and tried very sitting i know with shaker configuration in Arduino but its hardly start in the beginning and after stop moving cos the brass is heavy ,and solution ?
So if I get the components and print your board and put the components in the image 30PinAssembled.jpg I don't have to connect anything behind the board since the circuit is done?
@@TheDIYGuy999 I know it is a lot to abuse, but your complete code is Rc_Engine_Sound_ESP32.ino and if you want to change the sound, can you go from there? and your end plate is called pcb30pinTop it only looks on one side does not matter to send it to print? is that the truth tells me a lot about a module MFC-01
Finally you got back to interesting DIY stuff instead of Chinese RC cars ;)
Thanks
This DIY Sound and Lights is like Rocket Science to me!! 😞 But it looks so COOL.
Thank you
when you go reverse on throttle does it have the reverse beeper sound?
I think, but I'm not sure anymore, because now I'm using my own sound controller for all vehicles
In this video: comparing a commercial engine sound and light controller with my DIY Arduino controller. Happy new year to you!
i have no idea about how to do this stuff or what i am looking at. I am interested in buying the sound and light board assembled or would you be able to tell me exactly what to get? i followed the links but there are so man esps and bread boards etc i have no clue what to look for.. please message me ty
Really enjoying your videos, just scared about making my own. All looks so confusing :0 lol
can you test Container Truck Lighting and Voice Vibration System Pro(US/EU) 60A
You are amazing! Can this module be connected with the throttle wires of the electric bike and we can get the engine sound by connecting pam8403? If yes then please tell me how, thank you. Good luck with future videos.
What speed control work with this thing cuz mine isnt
i love your DIY works, i wanna learn it
Thanks for the praise. Yes, you should do it, it's not as hard as it looks like. All the best in the new year!
HELLO FRIEND, EXCELLENT PROJECT CONGRATULATIONS, COULD YOU HELP ME RESOLVE A SMALL NOISE IN THE AUDIO OF THE ESP32, THE ENTIRE PROJECT WORKS WELL, BUT THERE IS THIS NOISE IMITATING THE SOUND OF A HELICOPTER THANK YOU. IN VERSION 6.4 IT WORKS WITHOUT NOISE
Hi there how much would it cost me to get you to build me one ??
Hi buddy is it possible to adapt this for a static model? As an example a aircraft or a diorama ? I can see there are many features here that I could probably use in static displays.
There are the following interfaces: PWM servo signal, PPM, SBUS, serial. If you change the code, you could use digital or analog inputs as well
Where did you plug the vibration motor in the Arduino ESP32? Does the Arduino come with an output for that?
Pin 2, according to the sketch. You have to use an IRLZ44N Mosfet and a freewheel diode to drive it. See schematic: github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
Great test nice video
Thank you. Happy new year
Great video.your system are looking great. Can connect more light at your arduino system? Roof light, sidebars...
Thank you. Yes, of course you can. My King Hauler has about 50 LED and everything is connected to the sound controller:
www.rc-modellbau-portal.de/index.php?threads/tamiya-king-hauler-mit-hammer-sound.7450/page-3#post-258083
@@TheDIYGuy999 super arbeit. kannst du das auch für MAN tgx machen?und verkaufen? Danke
@@bologanbogdan6634 Der MAN TGX ist schon dabei. Einfach das entsprechende Fahrzeugprofil wählen. Sobald das SMD Board Design bestätigt ist, wird es ev. Boards zu kaufen geben. Ist aber noch nicht sicher. Unbestückte Platinen bestellen und selber bestücken ist ja jetzt schon möglich. In diesem Thread sind viele Nachbauten zu sehen: www.rc-modellbau-portal.de/index.php?threads/esp32-arduino-rc-sound-und-licht-controller.7183/page-28#post-258465
@@TheDIYGuy999 Ich habe eine private Nachricht im Portal geschrieben.
Is there a smaller package than the ESP32 for smaller scale RC's?
eg WPL
I also have a version for ATmega328, but it's much more limited: github.com/TheDIYGuy999/Rc_Engine_Sound
hi, i made the new board and connect the shaker to the corner 5v and tried very sitting i know with shaker configuration in Arduino but its hardly start in the beginning and after stop moving cos the brass is heavy ,and solution ?
You can change the shaker settings in the shaker tab.
So if I get the components and print your board and put the components in the image 30PinAssembled.jpg I don't have to connect anything behind the board since the circuit is done?
Yes, you only have to use series resistors for the LED. Everything else is on the board.
@@TheDIYGuy999 I know it is a lot to abuse, but your complete code is Rc_Engine_Sound_ESP32.ino and if you want to change the sound, can you go from there? and your end plate is called pcb30pinTop it only looks on one side does not matter to send it to print? is that the truth tells me a lot about a module MFC-01
Hast du das auch auf Deutsch?
Ja, schau mal hier: www.rc-modellbau-portal.de/index.php?threads/esp32-arduino-rc-sound-und-licht-controller.7183/
Danke
in the near future, i want to do the same with your help!
take a look in my truck videos!
I had a look at your truck. Nice mod, but the sound unit is missing ;-)
@@TheDIYGuy999 Yep! for shure i will need your Help!!!kkkkk
After I confirmed everything in the King Hauler build I may design a board, which will make everything a lot easier to build. Happy new year
@@TheDIYGuy999 I will Waiting...Happy new year for you and your subscribers too!!!
Hallo nochmal,
Könntest du mir in deinem video vor 2 Wochen nochmal antworten, wäre echt nett :)
Welches? Ist schwierig, in all den Kommentaren den Überblick zu behalten...
@@TheDIYGuy999Ich meine sein Video von vor 3 Wochen (dein vorvor letztes :)
Show...................
Thanks. Happy new year
ä schwizer
power sound orrible