The chain is bad. Your cleaning is bad. Your adjustment is bad you need to measure it especially on a tracer since its different. And you dont know how to use a torque wrench pls never touch bikes again
Hi my friend I see your comment I would like to ask something. I have a Yamaha Mt 09 and the manufacture adjust is 5.0 to 15.0mm but if I put second person is to tight hat must I do thanks
@@dionyshsde4573 hey that's right the factory adjustment stated in the manual is wrong. They changed it to 25 +- 5 in the new books. I would recommend a total of 25mm when your bike is on its side stand. Good luck hope you will find this useful.
@@dionyshsde4573 that's a weight issue perhaps. You can give it some extra slack but I would not recommend that. Try your pre load of the spring. Spring adjustment should be done for a second rider but doing it every time you got a buddy is not nice. Try to find the balance
Και μετά μας φταίει η αλυσίδα αφού δεν την πλένουμε ποτε τη περιμένουμε μετά
3 роки тому+1
not enough knowledge to set cahin range so if you do it by own you have to read owner manul because chain working range could be 15-50 mm also tork wrench doesnt use pull bolt out.
Wow, you should've used the whole can. I don't think you put enough on.
😂😂
Some stiff links there - you can see them at around 0:45
So what should you tighten first, the adjusters pinch bolts or the axle nut?
Thanks for the video
Stiff link there looks seized
Αυτα τα γράσσα δεν πέφτουμε πάνω στην εξάτμμιση και ζάντα;
Χαίρετε,what brush do you use there to clean the chain please..?✌🏻
Για wd 40 το εκοψα
The chain is bad. Your cleaning is bad. Your adjustment is bad you need to measure it especially on a tracer since its different. And you dont know how to use a torque wrench pls never touch bikes again
Hi my friend I see your comment I would like to ask something. I have a Yamaha Mt 09 and the manufacture adjust is 5.0 to 15.0mm but if I put second person is to tight hat must I do thanks
@@dionyshsde4573 hey that's right the factory adjustment stated in the manual is wrong. They changed it to 25 +- 5 in the new books. I would recommend a total of 25mm when your bike is on its side stand. Good luck hope you will find this useful.
@@wauter2000 tell me about the second person if I put someone it is too tight
@@dionyshsde4573 that's a weight issue perhaps. You can give it some extra slack but I would not recommend that. Try your pre load of the spring. Spring adjustment should be done for a second rider but doing it every time you got a buddy is not nice. Try to find the balance
@@wauter2000 perfect answer thanks 👍
Και μετά μας φταίει η αλυσίδα αφού δεν την πλένουμε ποτε τη περιμένουμε μετά
not enough knowledge to set cahin range so if you do it by own you have to read owner manul because chain working range could be 15-50 mm also tork wrench doesnt use pull bolt out.