EDIC Heat N' Run
Вставка
- Опубліковано 16 гру 2018
- Check out our review of the EDIC Heat N' Run External Heater System. Great product from a great company. Like and subscribe to our channel!
Call us today for a free quote on services!
330-256-6881
jbmcleans@outlook.com
Yes, absolutely
How much pressure does it support, my machine is 1500 psi
Which heater do you recommend i buy?The Edic external heater, or the Mytee hot turbo?
Which way does water flow through it?
Do you think the Edic external heater is worth $ 800?
I would love to buy it for mine ,but tell me why is it so expensive?
Hi ,thanks for the video ,does this heater make water steaming hot?
Yes as long as you don’t put ice cold water in the tank.
What is the maximum length of solution line do you recommend for this heater without loosing heat?
I am sure of that spec but I would say 50 ft
Wonder how long it takes to heat up, and the water in the tank too ..
Thanks for your question! It doesn't heat the water in the tank. The water from the tank is pumped into the Heat N' Run where it is heated and then it continues in the solution line to the wand. Once you turn on the machine and pump water into the heater, it takes about 5 minutes to get hot water.
Do I need to purchase special heat resistant hoses or solution lines with this unit?
Thanks for tour feedback. Check your solution hose, it should tell you what psi and temperature it is rated for.
Thanks.
Of course!
I bought this but can't connect to my ninja extractor they have both female connectors. trying to figure this out.
You should easily be able to switch out one of the female connectors with a male connector.
I do that all the time with my extractors, hoses, and wands.
Could you not just use hot water in the tank?
You can put warm water in the tank, but if you put water that’s too hot and run it through the pump it can damage the pump. Also, hot water will not reach the temperature that it will with the heater.
What amp do I need to run this? 15 0r 20 amp outlet?
Thank you for your question! The heater is a 15 amp heater.
Is it just for your machines ?
It can be used with other carpet cleaning extractors as well. EDIC has mounting brackets automatically on their machines, but it will work with other machines. You just have to think about how you want to mount it to the extractor.
Can you put this on a 500ax-p model prochem that is
You will have to check with Prochem on that but it works with many machines.
@@jbmcleans it does have holes already to attach the mounting plates,but was wondering if the machines needs modifying
@@gaynorkear9643 The EDIC machine it is built for does not need modifying. You will have to check with other manufacturers for extractors made my other companies.
@@jbmcleans thank you
Hi ,thanks for the video, does this heater make water steaming hot water?