Criss Cross Framed Cabochon Pendant Wire Wrapping Tutorial Beginner Friendly
Вставка
- Опубліковано 8 лис 2024
- Join this channel to get access to perks:
/ @oxanacrafts
Materials:
1 piece of square 20 gauge dead soft wire, 15 inches long
1 piece of square 20 gauge dead soft wire, 6 inches long
24 gauge half-round dead-soft wire(just keep it on the spool and use as needed).
18 gauge half-round dead-soft wire, 2 pieces, 4 inches long each
1 cabochon, mine is an oval Aquamarine, about 30mm tall
Swanstrom tool set : tinyurl.com/mp...
Other tools I recommend:
Pliers(Xuron Tweezer Nose): amzn.to/2Vghbyw
Wire Cutters(Xuron Micro-Shear): amzn.to/2UcRWg4
Round Nose Pliers(Beadalon Ergo): amzn.to/2U6ee3d
My bail making pliers: amzn.to/3z2W1rW
(the above are all affiliate Amazon links)
All about wire: • All About Wire (Wire W...
All about tools: • Wire Wrapping Basics: ...
General FAQ video: • FAQ: Stones, Wire, Oxi...
All about buying stones: • FAQ: Stones, Wire, Oxi...
My Website(where I sell my jewelry): oxanacrafts.com
Instagram: / oxana124
Patreon(where you can support me via donations): / oxanacrafts
Facebook: / oxanacrafts
Materials:
1 piece of square 20 gauge dead soft wire, 15 inches long
1 piece of square 20 gauge dead soft wire, 6 inches long
24 gauge half-round dead-soft wire(just keep it on the spool and use as needed).
18 gauge half-round dead-soft wire, 2 pieces, 4 inches long each
1 cabochon, mine is an oval Aquamarine, about 30mm tall
Swanstrom tool set : tinyurl.com/mpbjxpu6
Other tools I recommend:
Pliers(Xuron Tweezer Nose): amzn.to/2Vghbyw
Wire Cutters(Xuron Micro-Shear): amzn.to/2UcRWg4
Round Nose Pliers(Beadalon Ergo): amzn.to/2U6ee3d
My bail making pliers: amzn.to/3z2W1rW
(the above are all affiliate Amazon links)
All about wire: ua-cam.com/video/rQHvjR-m2k8/v-deo.html
All about tools: ua-cam.com/video/ep5nyZfebco/v-deo.html
General FAQ video: ua-cam.com/video/QrgImHlBDI8/v-deo.html
All about buying stones: ua-cam.com/video/QrgImHlBDI8/v-deo.html
My Website(where I sell my jewelry): oxanacrafts.com
Instagram: instagram.com/oxana124
Patreon(where you can support me via donations): www.patreon.com/oxanacrafts
Facebook: facebook.com/OxanaCrafts
Love this simple and elegant design. Thanks!❣
Thank you Oxana!!, I love the simplicity of this wrap, the stone is SO beautiful that it needs to be shown and this simple wrap does that.
Oxana you are very talented. This is pretty. ❤❤❤
What a great way to frame and show off a stone. Thanks for sharing.
You are an excellent instructor. I love your tutorials. You make it look possible. Thank you.
Thank you so much!
So beautiful!! Great video & u explain it so wonderfully. Easy to understand. Thanks for sharing yr talent with us. Teaching others to be creative is awesome. Can't Wait to try to make some pendants.
Thanks so much 😊
Wonderful clean design ❤ thanks Oxana!
You have such a talent I make jewelry to but I make nothing like you do like even if I tried my vary beast I even try to follow along with your vids and I can't you are just to good
If you keep practicing you will get better.
Love the vids you are one of my favorite UA-camrs
Very simply beautiful.
Nice colour
I'm a big Fan. You made it so easy to get started wrapping Stones. What do you use to clean up blemishes on the wire when done?
Thank you! I use a little bit of extra fine sandpaper
@@OxanaCrafts TY that means I'm doing it right!
Thank you Oxana.
What do you do with the excess wire cuts please?
You can save them and use for little chain links or just to have on hand when you need just a small piece.
I love the crisscross pendant from 6/8/24. Any suggestions for using this design for a smaller stone, possibly in silver? Thank you.
Yes sterling silver can be substituted for the copper in any of my tutorials. If the stone is super tiny it might be tricky. If your stone is at least 3/4 of an inch I think this design should work, I'd use slightly thinner base wires since the stone is smaller, 21 gauge square instead of 20 like I use in this video.
@@OxanaCrafts I will give that a try. TX. :)
love your work.! What brand of wire do you use? I can't find everything at rio grande or it is that I don't know what to look for, Half round and square seem to be hard to find.
My wire is from Rio Grande, they typically just have one listing for the square and on the page you select the gauge you want. You can search for square copper soft wire in their search bar and it should come up
Question: Could you use round wire too?
You can for some of the designs, but for this one it would be too difficult I think to use all round wires.
@@OxanaCrafts I just only have round 18 gauge, but watching it looks like that would work?
Can I use round wire for this as well?
You could possibly make it work with round wire instead of the square. But the half round wire can not be substituted for round in this case, I don't think it would work.
@@OxanaCrafts thank you. I’m gonna try this with round wire and use 1/2 hard, half round because it’s what I have …
Oxana, I joined your channel and the member-only videos still wont let me watch.
Only the highest level of membership, called Insider, allows you to watch the videos one week early, before they come out to the general public.
@@OxanaCrafts Thanks for answering. so it will come out to non-members eventually?
yes they all come out to the general public, it is just a matter of timing, the Insiders can view them 1 week ahead of time.
@@OxanaCrafts Did you see my idea/question regarding designing a coaster mold that has a juice groove in it? You know the little groove that runs along the margins of a cutting board to keep liquid from rolling onto the counter? I live in a very humid environment and when we have cold drinks the condensation from the glass rolls off of these resin coasters and ruins the wood around where they sit.
If you design and make coaster molds with the juice groove, I'd buy them!