Triumph TR6 Restoration
Вставка
- Опубліковано 29 сер 2024
- A Triumph TR6 restoration showing polyester primer,urethane primer, sealer, jambing, paint, & polish.
Find us @ www.refinishnet...
on Facebook goo.gl/RaFEjr
Twitter / refinishnetwork
YT Channel / jimmo4life
Other Great Video's to Check Out:
How to Choose Primer - goo.gl/JW7oUN
Blending Silver Paint - goo.gl/fqMoe5
Refinish Network Auto Body Repair Video's have been created for both professional automotive painters seeking information and enthusiasts looking for how to paint a car yourself, carry out minor repairs and general interest in automotive repair and vehicle painting.
I had mine painted in pieces and then reassembled. You don't want to paint over the gaps between the rear fenders and the joint point at the back deck. these cars flex like crazy and the paint cracks and rust develops on the mating surfaces in the area. Classic rust area. If you shine a light into the rear wheel wells of my car you can see light through the gaps
your work amazes me every time your 100 times better than any other spray painter on youtube once people get here to see you your subs will build thanks for shearing buddy
Well done...thanks. Love the British Cars.....Owned a TR 4 IRS, a Healey 3000, an MGA Twin Cam 1600, and an XKE 4.2L.....wish I just had one of'em back..lol
I am surprised how good this turned out considering the painter would vary his gun distance from the car from a few inches to two feet!
I`ve had several goes at spraypainting, it was o.k. if you ignored the bad bits! More runs than a West Indies test match!
I love when a video starts off with loads of cheap bondo :)
I have a '70 TR-6 painted the same original color- Laurel Green. It must be a rare factory color since I haven't seen another one.... until now. Thanks for the video!
heu all baday I want work car paint
Really? I am working on one now going silver. He just doesnt like the green, i guess.🤷🏻♂️
Great color!
brilliant job Jimmo.
Green is a classic british colour. We are currently restoring a 72 TR6 in Burnt orange.
I'm getting ready to spray dark green acrylic lacquer on my 1964 Spitfire. Hand rubbed, it will not have any spider webs caused from circular buffing
If I have to fly you to my shop I need for you to paint my TR6....it's got to happen man. Excellent work!!! or, I'll drag my junk to you....your choice, let me know, reply! I'm not rich, but I know super rich people who you will paint for now on....thx man, great talent.Jim
Nice job good to watch ,lots of prep , thanks
Great Job, paint , polishing, nice.
This is NOT a restoration, is a respray.
ua-cam.com/video/OK4WD1pkknw/v-deo.html
Fantastic job well done mate.
Great work!
What color is that? Awesome paint job
Love the channel. Love the measuring device more.
Thanks!
would have been nice to see the finished product outside in natural light.
What about door jams, under hood, trunk, etc.? We’re these done earlier?
I paint in my life triumph tr4, color REd it was piece of a junk before i started but after painting this car look georgeos:)
Bon travail, respect. Good job respect. Hi from France.
Wish they was someone local in my area to lay down some paint and clear like that...
Nice job debeer do a lacquer now which any one can use grip and rip 20 min bake and it's done goes on so easy any major flat finnish
Muito bom ver um belo trabalho sendo feito
Nice work
Painting a resto you start with the shell, then paint all the bolt on panels separately. Bet I could strike a match on the inner edges!
Awesome work
Ficou muito bonito o carro parabéns!
Araujo , ainda bem que não sou o único a gostar de ver esses trabalhos bem feitos e isso me da inspiração a continuar a buscar meu sonho profissional. Eu amo pinturas .A foto e minha esposa
Great video!
Thanks :)
I had no idea you could wet sand fresh paint! Interesting..
a job to be proud of
What grit DA paper did you use to smooth the stripes out with before you buffed? I've always wet sanded them but never dry sanded
very nice . good job . what paint system did you use and what clear
Great job
Beautiful
nice job!I'd like to know what products you put on it.?
nice job.
Great work as usual. I'm after some advice on spray guns, I'm going to be spraying my car soon and would like to know what gun you would recommend as a starter, for primer, base, clear?
Thanks
Deltalyo are the best low cost gun,
Awesome!! 👌👍
wow thats amazing!
In the process of painting my tr6 how much do you think a paint job like that would cost
is this wet on wet ? or did you sand between coats?
Do you by chance teach ppl how to paint... i wanna learn sooo bad... or do anybody in Ms that could show me the ropes
He could have parked a second car in the booth between that one and the exit fan and it would have been painted for free!
what grade sandpaper are you sanding the clear with?
Bon travaille
what size tip are you using for the clear coat?
exellent
what air pressure were u spraying the Sata?
very gooooooooooooooooooooooooooooooood
Do you using devilbiss or sata.
Did you change the thumbnail?
So grateful I went to college.
what kind is the varnish?
Has anyone pilled the tape and base came along with it?
I hope there is the finished product video coming forth. Otherwise this is a waste of time.
car looks great in british racing green but why does a 911 look so wrong in BRG
wow
fucking rad
use eyes protection eyes its a open organ....
hello friend , I am restoring a civic .
I scraped the paint to the can , I leveling with polyester mass and control of sanding , I applied 4 layers of primer , I sanding with control, and now looking at the brightness of the piece features 2 details minimum , this can be fixed with a quick mass ? comb filer Sikkens .
Gosh I don't know if this is the right place to say this, but please be kind! Yould you paint a TR6 for me guy?? just an awesome work and paint job...I'll do most of body if I have to, or you do it all....I'll bring the car to you, no problem....GOSH, Gee guy, YOU can paint....please paint my TR,,,,PLEASE....pls reply jacox1
I cant even watch...
Wow ,great finishes ,but not liking the colour man ,seriously glad it is not "Fucking Red" lol !
Don't like the colour.
Refinish Network with a sata hvlp 4000 how many inches away from panel do you recommend? They say to get closer witht these guns 4-5 inches away, but I was always taught 6-8. what would you say?
SATA tells me 6 inches with their guns.
MrMagee78
ppp