Ahhh this video. Ive had this light for a few years, its been a great light AND i STILL come back to this vid when i make changes because I forget how to use it 😅.. thank you
I wish I saw this before I set mine up. You make this look so easy. I had such a hard time. If I have to set it again I'll watch this first. Very helpful.
alright this video was a godsend but like i know this is years old and i ended up scrolling thru ur entire channel but was unable to find a video on diy mode “53”
I have this light and love it, however I just set the day time light to 20% brightness because when I had it bright, although looks great, the algae grows crazy . I'm hopping this helps because I have been having to clean my tank weekly.
I have had a horrible time setting this timer. I have got the daytime on set. Do you turn it to off to set the time off. Think I will just turn the moonlight off. On one of the times, the brightness will not go below 7. My fingers are sore from pressing on it. Do you have any other set up videos of this model ? Thanks
Im going insane! I want to use the DIY mode. I have entered into 53 mode & set all of the times/brightness. But it just goes back to 24hr mode! I have went into the 24 hour mode to make sure it is off, it says OFF. but it keeps reverting back to daylight mode! The brightness is showing far brighter than I want & the daylight settings are the same as daylight mode, not the DIY mode that I set. How do I make the light enter into DIY mode & stay in DIY mode?
@@southwestwind I finally figured it out. It will still look like it is in 24/7 mode even when it is in DIY mode. The display that shows the light values only displays the % of white light, ignoring the other light modes. It ended up working & now I really like this light. It was just a PITA to get working.
Hey all! I'm trying to work out the best hours to set my light to. Any recommendations? I have a black algae issue at the moment (had it before this light too) but wondering if I'm doing too much light!
@@Fredsreviews58 it's near glass doors into a conservatory so I suppose it does get some light. I think the algae is getting worse though. How many hours and at what % do you go?
@@abz8928 I do very low percentage for a few hours. You will probably have to try and see what works best for you though. If you have live plants, they need more light
How about a "simple" mode where you can set the time you want it to come on and then go off at the brightness level you want?? It must not be complicated enough...
Your video is great, the explanation is also very careful, we also have great aquarium products, want to invite you to review, look forward to your reply.
Thank you so much for your video, while I like the light I really wish it came with decent instructions rather than a sheet with such tiny writing and poor English that it is basically impossible to read and understand (the only failing to what otherwise seems like the perfect aquarium light)
Thank God for tutorials like this. I was losing my mind trying to set this thing up
X1
Indeed… driving me nuts…
Lol
Ahhh this video. Ive had this light for a few years, its been a great light AND i STILL come back to this vid when i make changes because I forget how to use it 😅.. thank you
Glad it's helpful
Yep. When the power flashes randomly resets the settings, here I am again.
I wish I saw this before I set mine up. You make this look so easy. I had such a hard time. If I have to set it again I'll watch this first. Very helpful.
Glad the vid helped :)
I have the same led light. Thanks for taking your time showing us how to use the timer. 👍🏻
Dude this video has helped me so many times. Thank you!
Glad it helps, thanks for watching!
I ordered this exact light the other day and just knew I'd need a tutorial on the set up. Perfect timing, thank you!
Thank you very much. Thanks to you, understanding this manual is much easier 🎉🎉🎉
Thank you for the walkthrpugj!
Thanks for watching:)
Are you planning on making a video for the DIY instructions? I will definitely watch that one if you do!
Read the manual isn’t that hard
I cant work out how to do the 24 hour cycle help
Right. I get everything set but L8 doesn’t allow me to adjust the time at all. It has L8 turning off an hour after l1 is supposed to come on
@@melaniebrown3449 Are you using 12 or 24- hour time?
alright this video was a godsend but like i know this is years old and i ended up scrolling thru ur entire channel but was unable to find a video on diy mode “53”
I have this light and love it, however I just set the day time light to 20% brightness because when I had it bright, although looks great, the algae grows crazy . I'm hopping this helps because I have been having to clean my tank weekly.
Do you have plants in yours? Is that sufficient enough to keep them healthy?
Thank you so much for this! I just purchased this light and your video is very helpful.
I got the same one trying to get it updated I really like this one
Thanks I know this is an older video but helped out a lot
I have had a horrible time setting this timer. I have got the daytime on set. Do you turn it to off to set the time off. Think I will just turn the moonlight off. On one of the times, the brightness will not go below 7. My fingers are sore from pressing on it. Do you have any other set up videos of this model ? Thanks
Thank you so much!!! This video saved me today! 😊
I'd love some light for review! How do you precipitate?
As a UA-camr companies reach out to make vids for their products
Thanks for help. I bought a used without manual .
on 51 how do you set the OFF time? It skips from the start time over to brightness.
I also need to know this
I set up the times and everything but the light doesn’t go on when it’s supposed to or go off when it’s supposed too
3:38 to set off continue to press M right after setting ON and look at the very left angle its small blinking "off"
Im going insane! I want to use the DIY mode. I have entered into 53 mode & set all of the times/brightness. But it just goes back to 24hr mode! I have went into the 24 hour mode to make sure it is off, it says OFF. but it keeps reverting back to daylight mode! The brightness is showing far brighter than I want & the daylight settings are the same as daylight mode, not the DIY mode that I set.
How do I make the light enter into DIY mode & stay in DIY mode?
Exactly bro. Same here
Any fix?
@@southwestwind I finally figured it out. It will still look like it is in 24/7 mode even when it is in DIY mode. The display that shows the light values only displays the % of white light, ignoring the other light modes. It ended up working & now I really like this light. It was just a PITA to get working.
@@SugaryPhoenixxx i guess I just had to leave it, it finally implemented my timer settings and it works now. Cheers!
What happens if a power break happens and turns back on...does everything reset? Or is there battery memory?
Memory
Memory
Can you put the middle colours led on at the same time you can put the wrgb at the same time
Hey all! I'm trying to work out the best hours to set my light to. Any recommendations? I have a black algae issue at the moment (had it before this light too) but wondering if I'm doing too much light!
Is the tank near a window. I usually just turn on the light for a few hours a day, as long as room isn't too dark or right by a window
@@Fredsreviews58 it's near glass doors into a conservatory so I suppose it does get some light. I think the algae is getting worse though. How many hours and at what % do you go?
@@abz8928 I do very low percentage for a few hours. You will probably have to try and see what works best for you though. If you have live plants, they need more light
@@Fredsreviews58 yes I have some live plants. That's why I upgraded to this light to improve their health. Thanks I'll have to mess about with it
This light makes absolutely no sense, I set the times and everything, I come back the next day and all the settings are changed some how
It doesn't for me, it works well, my light went out once and it thrue off the hour..
@@AZTECPLATOO i figured the settings out, it’s been working perfectly ever since
@@Gk22632 can you share hoe you did it because i try and it doesnt work
Don't switch it off at the plug resets everything and make it 24h clock to make things easier
How about a "simple" mode where you can set the time you want it to come on and then go off at the brightness level you want?? It must not be complicated enough...
would this be too small for a 10 gallon? or should i get the 18-24 in instead
As long as the light fits a 20 inch tank, it should work with a 10 gallon tank
Your video is great, the explanation is also very careful, we also have great aquarium products, want to invite you to review, look forward to your reply.
I’d be interested, you can find my email on my about page on UA-cam. Thanks!
Would like to see diy video
Alguien sabe como programarla para que prenda y apague sola?
Does this light have the sunrise and sunset feature?
Someone didn't watch the video 😮
The only downside is the buttons quality is very low
For some reason mine didn't have a manual... Thanks
Does it not have 53
Wheres the diy mode?
I try many times to memories the times but for sure there is some issue with it 😢
Nor 51 or 52, but S 1 S for settings :-)
No entiendo nada
This vid was more confusing then the instructions. Dude was ya baked
The stupid brightness doesn’t go up
It should get incredibly bright
Deutch sprechen
Thank you so much for your video, while I like the light I really wish it came with decent instructions rather than a sheet with such tiny writing and poor English that it is basically impossible to read and understand (the only failing to what otherwise seems like the perfect aquarium light)
this lights are crap , diy doesnt work
Actually it work’s awesome when you do it right. Just confusing to set up
@@maci.valentine maybe you could post a vid showing how...I'd appreciate it!