Hey there. You forgot one SMALL detail. The dealer has to activate developer remote first. You should note this on your post and not waist people's time
nope, on the 2018 version the UI looks slightly different and there is no "engineering mode". There is only a "dealer menu" that comes up by pressing long on the car picture. The dealer menu doesn't have any SW Settings submenu or anything related to Mirrorlink. Please share if anyone knows how to activate it
on a Mercedes w213 2019, it is impossible to enter the engineering menu like that, maybe you need to press an additional button who knows? (the text was translated through a translator)
To access the engineering mode on a 2017 Mercedes E-Class American model, use the following sequence code: 1. Turn on the COMAND System: Ensure the vehicle is in the ‘On’ or ‘Run’ position. 2. Enter Engineering Mode: • Press and hold the ‘Menu’ button on the COMAND controller. • Simultaneously, press the ‘Back’ button. • Continue holding both buttons until the COMAND screen displays a hidden engineering mode menu. This may take about 10-15 seconds. 3. Access MirrorLink Settings: • Navigate to the ‘System’ or ‘Connectivity’ menu within engineering mode. • Locate the ‘MirrorLink’ option. 4. Enable MirrorLink: • Toggle the MirrorLink feature to ‘On’. • Confirm and save the changes. 5. Exit Engineering Mode: • Press the ‘Back’ button or turn off the COMAND system to exit engineering mode. Note: The exact sequence can vary by region and model year. If the above steps do not work, consult a Mercedes-Benz service manual or contact a dealership for the precise procedure.
Now i know, First the dealer must activate engineering mode using Xentry. Then Mirrorlink can be turned on from the engineering menu. Dealers are reluctant to enable engineering mode.
Hi, thanks for the video. It doesnt work with my W213. Dealer Menu does work (same procedure but holding down the button on „Vehicle“). My car is built in 2016 and has Comand NTG 5.5. Is there anything you or someone else can recommend to find Engineer Mode on my car?
Hi, my left side steering buttons and touchpad button are not working. The right side works perfect. Do you have any idea? I have a Mercedes w213 pre facelift
@@saldirays I went to the Mercedes garage and they replacement the button unit. It is a unit with several buttons. They told me that it is a common issue with newer Mercedes cars. So you have to replace the button unit, it should also be programmed/ coded.
But Mirrorlink is already visible in your screen at the beginning. Is it possible to turn this on without obd2 activation? MirrorLink_Settings Remote_UI -> on MirrorLink_Settings Notifications -> on MirrorLink_Settings MirrorLink_over_NCM -> on MirrorLink_Settings Transmitt_Audio_for_SDS -> on MirrorLink_Settings Transmitt_Audio_for_Microphone -> on
IF YOU CANT OPEN THE MIRRORLINK THEN THE CAR IS NOT EQUIPED WITH MIRRORLINK IT IS AN OPTION WHEN YOU BUY THE CAR AS NEW. THERE ARE OTHER OPTIONS ON UA-cam WITH OBD DEVICES BUT DONT TRY IT YET
I have got 2016 e class how can I enable the engineering mode my menu is different from your menu is there any other way to enter in engineering mode please
In my 2018 e class this method doesn't work. My menu is slightly different. The same icons, but a little bit different backlight. Maybe mercedes has blocked this 10s pressing method?
what kind of device do you have exactly? COMAND or "Audio 20 with larger display"/"Media display" ? I'm about to place an order for a W213 and definitely would want mirrorlink on it.
what do you mean by "by rest system' ? You mean "reset system' in the dealer menu? I did not dare to click that. Why would that bring up the mirrorlink option?
Hakan Ariburun In my 2018 e class this method doesn't work. My menu is slightly different. The same icons, but a little bit different backlight. Maybe mercedes has blocked this 10s pressing method?
Doesn't work on my W213, I can't enter Engineering Mode as shown in this video. The car just does nothing when pressing + holding the wheel while selecting "System" in Comand.
OK so engineering mode was successfully enabled, the parameters set to what is visible in the video, head unit rebooted, mirror link started, fails every time! Any advice on this?
Mo Aky can you put me in touch with this coder? I’ve already got mirror link but I want to enable other stuff like tv tuner, use phone for internet data etc.
Hey there. You forgot one SMALL detail. The dealer has to activate developer remote first. You should note this on your post and not waist people's time
I agree these UA-camr have no clue
nope, on the 2018 version the UI looks slightly different and there is no "engineering mode". There is only a "dealer menu" that comes up by pressing long on the car picture. The dealer menu doesn't have any SW Settings submenu or anything related to Mirrorlink. Please share if anyone knows how to activate it
Legend mate, works on W222 2018 with eng mode enabled in monaco/vediamo
In the cars sold in the USA it’s called Bluetooth and it’s engaged from the factory.
Idiot
on a Mercedes w213 2019, it is impossible to enter the engineering menu like that, maybe you need to press an additional button who knows? (the text was translated through a translator)
Press the (A) button while pressing the other.
Don’t Work for me
THIS VIDEO NEEDS TO COME DOWN... THIS METHOD DOES NOT WORK AT ALL!!! MANY ON HERE UNSUCCESSFUL IN ATTEMPTING....
You have to activate engineering mode first via DTS Monaco
Hi guys, you need to press start-stop button at the same time with the menu button to enter engineering mode
motor start ?
I have a CLA 2017, i'm confused, mirror link and android auto are two seperate and different things?
To access the engineering mode on a 2017 Mercedes E-Class American model, use the following sequence code:
1. Turn on the COMAND System: Ensure the vehicle is in the ‘On’ or ‘Run’ position.
2. Enter Engineering Mode:
• Press and hold the ‘Menu’ button on the COMAND controller.
• Simultaneously, press the ‘Back’ button.
• Continue holding both buttons until the COMAND screen displays a hidden engineering mode menu. This may take about 10-15 seconds.
3. Access MirrorLink Settings:
• Navigate to the ‘System’ or ‘Connectivity’ menu within engineering mode.
• Locate the ‘MirrorLink’ option.
4. Enable MirrorLink:
• Toggle the MirrorLink feature to ‘On’.
• Confirm and save the changes.
5. Exit Engineering Mode:
• Press the ‘Back’ button or turn off the COMAND system to exit engineering mode.
Note: The exact sequence can vary by region and model year. If the above steps do not work, consult a Mercedes-Benz service manual or contact a dealership for the precise procedure.
Does this work on e 400 2018?
Hi does this works on an 2019 E-class aus Well ?
Now i know, First the dealer must activate engineering mode using Xentry. Then Mirrorlink can be turned on from the engineering menu. Dealers are reluctant to enable engineering mode.
Franek Reyes thats fucked
I know, real fuckt up.
Hi, thanks for the video. It doesnt work with my W213. Dealer Menu does work (same procedure but holding down the button on „Vehicle“). My car is built in 2016 and has Comand NTG 5.5. Is there anything you or someone else can recommend to find Engineer Mode on my car?
do you solve a problem?I have same
@@stradavrgorac6333 No unfortunately not, good luck
Hi, my left side steering buttons and touchpad button are not working. The right side works perfect. Do you have any idea? I have a Mercedes w213 pre facelift
I have the same issue.
@@saldirays I went to the Mercedes garage and they replacement the button unit. It is a unit with several buttons. They told me that it is a common issue with newer Mercedes cars. So you have to replace the button unit, it should also be programmed/ coded.
Hello, thanks for the video, can we do this on a class A w177.
Will it work on 2016 GLE?
But Mirrorlink is already visible in your screen at the beginning. Is it possible to turn this on without obd2 activation?
MirrorLink_Settings Remote_UI -> on
MirrorLink_Settings Notifications -> on
MirrorLink_Settings MirrorLink_over_NCM -> on
MirrorLink_Settings Transmitt_Audio_for_SDS -> on
MirrorLink_Settings Transmitt_Audio_for_Microphone -> on
Benedek Jotu I had to turn it on in engineering mode
I'm hoping so much that it'll work, I placed an order today for a w213. It didn't for others here in the comments, this got me worried.
Does not work on my 2017 E400. Are there any other things that I need to do first?
Does thsi work on a 2010 e350 coupe
anyone got any updates on doing this, it doesnt work on my 2017 model in the UK either and MB have refused to help :(
This function have to activate by OBD, carsolution.aliexpress.com/store/feedback-score/2843060.html?spm=2114.12010108.0.0.778528bf88I1ve
have you tried it yet with obd? got same problem
Will it work on 2020 e350
Not working for me :(
I have a B Class 2021 plate A247 with no Apple CarPlay installed any chance i can do a phone mirror on the car?
Will this work on 2015 S Class?
Doesn't work in my E Coupe 2018..do it has something to consider before??
Can you enable apple car play too?
Hei får du gjort det på min? Har en 2017 e200 s213 har prøvd men får det ikke til.
IF YOU CANT OPEN THE MIRRORLINK THEN THE CAR IS NOT EQUIPED WITH MIRRORLINK IT IS AN OPTION WHEN YOU BUY THE CAR AS NEW. THERE ARE OTHER OPTIONS ON UA-cam WITH OBD DEVICES BUT DONT TRY IT YET
Does it work without that menu
Hi if my car has wifi, should i leave that on?
I have got 2016 e class how can I enable the engineering mode my menu is different from your menu is there any other way to enter in engineering mode please
Press hang up call button (red) 1 and #
Hold them together for 5 sec
@@Deszii90 which call button,on car?
@@Deszii90 the red button on call I understand. But the # button? Where is this located?
Do u have hack to lower insurance rates
It doesn't work on mine.. it there other way around it ?
j'ai une classe e coupé 350 C238 2017 et cela ne fonctionne pas en appuyant 10 secondes. Comment activer le mode ingeneerie ?????
Not working for my 19 plate uk E class
Any ways for 2019
In my 2018 e class this method doesn't work. My menu is slightly different. The same icons, but a little bit different backlight. Maybe mercedes has blocked this 10s pressing method?
Tomasz Miszczuk didnt work on mine either
what kind of device do you have exactly? COMAND or "Audio 20 with larger display"/"Media display" ? I'm about to place an order for a W213 and definitely would want mirrorlink on it.
you can do it from delar mode by rest system
I did it and the mirror link came up
what do you mean by "by rest system' ? You mean "reset system' in the dealer menu? I did not dare to click that. Why would that bring up the mirrorlink option?
Benedek Jotu I just did it and it's work fine Don't Worry
can u do the same for CarPlay Activation
What I have to do after enabling mirror link??
I’m not getting that detailed list of menu.
Thanks for video but it didnt work on my w213. Is there any other way to enter engineering menu?
Hakan Ariburun In my 2018 e class this method doesn't work. My menu is slightly different. The same icons, but a little bit different backlight. Maybe mercedes has blocked this 10s pressing method?
Hakan Ariburun merhaba Türkiye de bulunan aralar kısıtlı hizmet yazıyor acabilen varmı
Hi there you completely rang I Did dis in may car it doesn’t function
So don’t give bad information to people stop this video
Doesn't work on my W213, I can't enter Engineering Mode as shown in this video. The car just does nothing when pressing + holding the wheel while selecting "System" in Comand.
maybe you have to activate it by OBD first, carsolution.aliexpress.com/store/feedback-score/2843060.html?spm=2114.12010108.0.0.778528bf88I1ve
OK so engineering mode was successfully enabled, the parameters set to what is visible in the video, head unit rebooted, mirror link started, fails every time! Any advice on this?
Mo Aky how did you enable engineering mode?
@@Rez2k8- a mercedes coder enabled it for me via the star diagnostic system. Mirror link does NOT work, I have tried everything possible
Mo Aky can you put me in touch with this coder? I’ve already got mirror link but I want to enable other stuff like tv tuner, use phone for internet data etc.
@@Rez2k8 mmohammed @ hotmail dot co dot uk
Mo Aky Can you pls also direct the coder details to me? alis43 at sky dot com
Do you know how can i change the mercedes benz logo with the amg, i mean the logo that you see for 3 second when i start the car. I have that mbux
It’s like giving a kid a kinder egg. Only you can not open it. You know it’s there only no you cannot open it. It’s my car!!!!
Enginering mode isn’t coming out on my e220d 2018
I press rotation button for 10 seconds, but nothing appear.. anyone knows a different way
Don't work for me too.i think we must put a OBD
How to do it with a w213 2020??
2016 model here n it isn't working.
Not working for w213 😕
this does not work on my uk model w213 amg line premium 2017, any other way to get mirror link commard system 12.3inch screen ?
Hi I have same car do you found any solution how to activate mirror link???
Tq for sharing 😊😊
Kanskje fortelle at folk må ha bilen inn hos forhandler for å aktivere åpning for dette først!! hadde gjort seg det :/
Jeg trengte ikke å gjøre det.
@@GeirKarstenMoen Da var nok din bil åpnet for dette allerede, å lucky for you 😬, min bil er sprang ny, så får nok ta meg ein tur ned til de!
Didn’t work. This guy just made the video to get “like” on the video. It’s just apply on his car.
does not work
Engineering mode does not exist when I try. Pointless
Thank you🙏🏻
There is someone that could tell me how to enter in the engeneering mode on a 2016 CLA with ntg 5.4 command online? Thanks
Doesn't work ok 2018 e class
Any luck on your e 2018
@@82freddyg no it wont work on 2018 e class
@@systemler44 Thank you..To bad i was looking forward to mirror my screen
On vehicle hold rounded gear with ok on wheels for 10 sec then booom open thank me later hahaha you will need this reply
What about S class
😂😂😂😂😂
Funktioniert nicht
Thanks for video but it didnt work on my w213. Is there any other way to enter engineering menu?
On my car this is the only way as far as I know.