Hey kevin! I just wanted to say thank you for this video. Even 5 years later you got me setup in CUCM! I been trying to learn the phones part for ages and this was a one time watch through and got everything up an running! You're a great teacher!
Thank you so much, Kevin. I have been trying to learn CUCM all summer and now I can make calls. I also followed your video with Cisco's Unity Connection. You make everything easy to understand.
Outstanding Kevin! Again, you have nailed exactly what we need out there. I can tell, I am going to have to download and review these a couple more times until it becomes muscle memory.
Laffin Vid how did you download this? Just asking as got a system we have been given to help start-my company and Cisco saying we can’t download it as we have a system out of date
Unbelievable! I'm running this stuff on an old laptop. -lol I have a server on order. I just thought I would try to work with what I have, which has always been the philosophy of my life.
From where we know how much disk space and all settings to be use while installing router or CUCM ? Is cisco provide any document when we purchase CUCM from them ?
Kevin, I'm working on a similar lab, my 8841 and 7940 phones plugged directly to a physical switch(2960) won't register(status message on the phones show TFTP timeout). Do you have videos showing your configs from your physical switch? From the CLI of the switch I can ping the PUB, CDP neighbor shows the PUB. My setup is phones plugged to the 2960, fa0/24 to the NIC of the VMware Workstation server. All devices have static IP's. Is there Option 150 or ip-helper address i'm missing on the switch?
Hi Kevin - I have an 8865 IP phone that's asking for a QR/Activation Code and I'm running CUCM 12.0 in my lab, but I don't see an option to generate a QR/Activation code. I got the IP Phone refurb for my home lab. Is there a way to activate an 8865 ip phone with CUCM 12.0?
Nice... I've been running cucm's behind virtual routers inside of gns3 and then out to the internet for a few years, but the distributed router setup inside of vmware is confusing as all get out to me... Checking the videos now 😁
Hello sir, I had a quick question. So I currently have a cisco 8841 in my home lab network that isn’t setuped due to the fact I do not have a router that is compatible with it. I was wondering if you had any cheap cisco routers in mind that has the GUI like CUCM, has slots where I can put fxo/fxs cards, and if so, has vm. Thanks!
First nice video great help. I must have something mix-up because i follow your steps and everything load successfully. however, when i go to the 10.3.3.1 i get nothing and i waited one hour after install. I'm able to login in the HQ-CUCM-PUB console but not able to go to the web page to finish the setup. Help Thanks
Awesome! Kevin thank you so much for sharing ! Great . . .Great. . . Video !
5 років тому+2
This video is great, where can I find more videos about Calling Search Space & Partitions explanation? I just went to the videos on this channel but I didn't see any sequence.
Great video and very informative. I do have one question though. Do you have to assign the hqphone1 and hqphone2 users to the device or could you have left it as anonymous?
Kevin Wallace Thanks for the clarification. We have mainly skinny phones in my company and have never had to add a user to the device itself. I appreciate all of the effort you have put into these videos. I’m anxious to not only become CCNA Collaboration certified, but also to know the technologies well.
Hi Kevin, thanks for created a video and sharing. Sensational ! do you have any UC community online forum allow to join for elaborate and discussion for this expertise UC knowledge?
Hey Kevin, Great video :) .... With regards to NFR Collab v12 , is it worth the investment if I already have NFR Collab 11.5 ? Also, CSR1000v has cube functionality, which version of this do you recommend and does it support SIP SRST ?
There is one big steel plant in my city and there are cisco ip phones installed there and they manage it through CUCM...i mean the CUCM hardware device server.
yes sir but they are using old server may be 10 years old or more so... sir i have dont Ccna R&S certification should i go for Ccna Data center for more pay...since Data center i can learn more there...please guide me.
Mr. Kevin which better to setup the CUCM is thru web gui or cli ? if you don't mind may I ask to ps. send to my e-mail the configuration of this tutorial, I want to see how is it look like in cli code :)
Hello Kevin, been watching you from years and really enjoying your trainings ,keep the good work! Would you please tell me how did you do the configuration of the physical switch and the physical server in order to cooperate and able to register the Cisco IP Phones? I am currently preparing myself for my CCIE lab and I am currently stuck on that phase, would really appreciate it!!!
Hi Wallace, Thanks for upload very useful videos. I am new to cisco world and want to build lab for my practice. I found that AMD Ryzen processors are giving more cores and threads in very less money compared to Intel processors. I did search on google and found that we cannot install CUCM on AMD processors while it can be install on Intel processors machines. Can you please guide me if it is right statement or wrong so that i will invest my money on correct hardware to build my Cisco lab.
Personally, I have had issues on AMD processors. Most things worked, but some of the Media Resources configurations failed. There was a workaround, where I had to boot off a CentOS DVD, create a new folder, and move some files over. In fact, I've had to do that a couple of times. Since then, I strictly use Intel-only servers.
Hey kevin! I just wanted to say thank you for this video. Even 5 years later you got me setup in CUCM! I been trying to learn the phones part for ages and this was a one time watch through and got everything up an running! You're a great teacher!
oh and this video applies and works to CUCM 14
I've been following Kevin Wallace for more than 10 years. He's very good. I wonder why some idiots give him thumbs down.
Thank you so much, Kevin. I have been trying to learn CUCM all summer and now I can make calls. I also followed your video with Cisco's Unity Connection. You make everything easy to understand.
Thanks Kevin. You are great. please share some more videos on imp and jabber deployment. your one hour video is saving us weeks and months
First time trying CUCM. Very helpful starting point!
Outstanding Kevin! Again, you have nailed exactly what we need out there. I can tell, I am going to have to download and review these a couple more times until it becomes muscle memory.
I'm just starting to learn this. downloaded cucm 12 and installed following your video. Thank you!
Laffin Vid how did you download this? Just asking as got a system we have been given to help start-my company and Cisco saying we can’t download it as we have a system out of date
I'm really grateful for this video. I'm pretty new to the CUCM but this video really helped me to understand a lot of things. Thanks a lot.❤❤
Wonderfully taught!! I wish most presenters would use your template to teach the basics! Keep up the FANTASTIC WORK
Unbelievable! I'm running this stuff on an old laptop. -lol I have a server on order. I just thought I would try to work with what I have, which has always been the philosophy of my life.
Hi Kevin, definitely you deserve more than a thank you for your effort, time, energy, quality of materials and lot more you provided.
Thanks for posting. This is exactly what I was looking for!
I was trying to think of things to say but the only words that come to mind is Thank You.
Thank you Kevin. You are very appreciated person. Keep doing so nice job! Thanks again
From where we know how much disk space and all settings to be use while installing router or CUCM ?
Is cisco provide any document when we purchase CUCM from them ?
In this video have you setup SIP trunk ???
That's awesome. Thanks a lot, Kevin
It was very simple to understand from your video.
thanks kevin, your video was so great and helpful
You’re very welcome! I’m glad you enjoyed the video.
Hello Kevin, thank you for the information. Is there any other video show the configuration of the Two switches?
Great video Now I have cleared my mind
Kevin, any discounts going on the collaboration series? Thanks
Kevin, I'm working on a similar lab, my 8841 and 7940 phones plugged directly to a physical switch(2960) won't register(status message on the phones show TFTP timeout). Do you have videos showing your configs from your physical switch? From the CLI of the switch I can ping the PUB, CDP neighbor shows the PUB. My setup is phones plugged to the 2960, fa0/24 to the NIC of the VMware Workstation server. All devices have static IP's. Is there Option 150 or ip-helper address i'm missing on the switch?
Hi Kevin - I have an 8865 IP phone that's asking for a QR/Activation Code and I'm running CUCM 12.0 in my lab, but I don't see an option to generate a QR/Activation code. I got the IP Phone refurb for my home lab. Is there a way to activate an 8865 ip phone with CUCM 12.0?
any more videos on setting up a site B and how to?
thanks
Nice Friends mug. Keep up the good work!
its great video has made for fresh engineers.
Can i please know what is the difference between directory number and extension number used as XXXX in External Phone no mask ? Are both of them same.
Nice... I've been running cucm's behind virtual routers inside of gns3 and then out to the internet for a few years, but the distributed router setup inside of vmware is confusing as all get out to me...
Checking the videos now 😁
Hello sir, I had a quick question.
So I currently have a cisco 8841 in my home lab network that isn’t setuped due to the fact I do not have a router that is compatible with it. I was wondering if you had any cheap cisco routers in mind that has the GUI like CUCM, has slots where I can put fxo/fxs cards, and if so, has vm. Thanks!
Can we install CUCM directly on server without virtualization ?
First nice video great help. I must have something mix-up because i follow your steps and everything load successfully. however, when i go to the 10.3.3.1 i get nothing and i waited one hour after install. I'm able to login in the HQ-CUCM-PUB console but not able to go to the web page to finish the setup. Help Thanks
Awesome! Kevin thank you so much for sharing ! Great . . .Great. . . Video !
This video is great, where can I find more videos about Calling Search Space & Partitions explanation? I just went to the videos on this channel but I didn't see any sequence.
Kevin, why didn't you use the ova file?
My name is also Kevin, just bought your book.
Can i use a non cisco IP phone for this configuration?
Thank you so much sir it is very supportive vedio
Great video and very informative. I do have one question though. Do you have to assign the hqphone1 and hqphone2 users to the device or could you have left it as anonymous?
Kevin Wallace Thanks for the clarification. We have mainly skinny phones in my company and have never had to add a user to the device itself. I appreciate all of the effort you have put into these videos. I’m anxious to not only become CCNA Collaboration certified, but also to know the technologies well.
Hi Kevin, thanks for created a video and sharing. Sensational ! do you have any UC community online forum allow to join for elaborate and discussion for this expertise UC knowledge?
Great Video Kevin, Look forward to more videos.
Hey Kevin, Great video :) .... With regards to NFR Collab v12 , is it worth the investment if I already have NFR Collab 11.5 ? Also, CSR1000v has cube functionality, which version of this do you recommend and does it support SIP SRST ?
There is one big steel plant in my city and there are cisco ip phones installed there and they manage it through CUCM...i mean the CUCM hardware device server.
yes sir but they are using old server may be 10 years old or more so...
sir i have dont Ccna R&S certification should i go for Ccna Data center for more pay...since Data center i can learn more there...please guide me.
Mr. Kevin which better to setup the CUCM is thru web gui or cli ? if you don't mind may I ask to ps. send to my e-mail the configuration of this tutorial, I want to see how is it look like in cli code :)
When you are going to explain LDAP integration with CUCM?
We’ll be covering that in my upcoming CLCOR (350-801) Video Training Series, which will be released in February 2021.
thanks for uploading this video it was really good and informational
Great Video, please do you have video about Cisco Expressway install & configuration?
Hi Kevin, will you do an updated home lab build for the new 2.0?
Thanks for the reply. I look forward for more great content.
Awesome Video, Great explanation!
Hi kevin,
I dont have a physical server like you have . Please let me know if this can be done without the physical server that you used(hp).
I’ve always used the ESXi hypervisor installed on its own server, but you might want to try running it as a VM using on your PC.
Very Helpful, as usual...
Thank You so much!.
thank you for this video Kevin
hello sir how do i get a link to download the exsi server image
Sir can u do a video on an exchange server tooo sir
Hello Kevin, been watching you from years and really enjoying your trainings ,keep the good work! Would you please tell me how did you do the configuration of the physical switch and the physical server in order to cooperate and able to register the Cisco IP Phones? I am currently preparing myself for my CCIE lab and I am currently stuck on that phase, would really appreciate it!!!
No one talks about the default hold music?
interessant. Danke
very well explained .
Outstanding knowledge share
Thanks very much!
I am actually relying on DNS in CUCM.
Hi Wallace, Thanks for upload very useful videos. I am new to cisco world and want to build lab for my practice. I found that AMD Ryzen processors are giving more cores and threads in very less money compared to Intel processors. I did search on google and found that we cannot install CUCM on AMD processors while it can be install on Intel processors machines. Can you please guide me if it is right statement or wrong so that i will invest my money on correct hardware to build my Cisco lab.
Personally, I have had issues on AMD processors. Most things worked, but some of the Media Resources configurations failed. There was a workaround, where I had to boot off a CentOS DVD, create a new folder, and move some files over. In fact, I've had to do that a couple of times. Since then, I strictly use Intel-only servers.
I am really thankful of you to provide the prompt reply and give the correct guidance. I will go for Intel now.
Best video
Dear Kevin,
Thank you for this video.
I have Cisco BE6K, please I need your support to install and configure.
Regards,
Great video!
Great video !! Thanks for the tips, I have a UA-cam channel in the beginning about telephony
You are great!
Thanks, great! Нравиться подход у тебя. Кстати, у меня на канале есть подобное видео, только на русском языке.
Please I need subtitles
Maybe just get few tin cans and a string?🙂
Do you offer consultation?
Can I have your email ?
Excelentē !
Can I be your assistant and perform internship ❤