Hi! Thanks for the quick response! I thought of that and grabbed a fresh quad off the table. Nice and cool. It also connect but no video. Bebug says Delta 1 Delta 0 A few delta 11 in the beginning. Then mostly delta 0 Delta Delta delta!
delta is the time value from previuos packets. small delta values means connection is fine and video receiving is active. Try to enable or disable "Use HW decoder" in app settings, chapter "Video/Audio". Also maybe your graphics card is not compatible with gstreamer which used for video decoding and drawing in app.
Does not work on win11. Does not give pop ups like in video to chose the connection and plugging the Goggle v2 does nothing. Does low power mode affect it?
Running it on my laptop with Win 11, no problem. What pop ups do you want to see? Click on the 3-rd icon from bottom in left panel, "Application settings". Then chapter "Cameras", select "DJI FPV Goggles in list".
Maybe need to configure driver. Click big button "USB driver configuration", Zadig will be started. In device list choose the goggles and click "Reinstall"
@@cosmostreamer4773 i googled and tested yesterday but i could manage to do it i have tested your software in windows it was amazing i got 70 to 85ms latency but i want it on linux also for opencv test
By default - no. But there is a FPV.WTF Hack that may be allow to do that. I did not thought about making the desktop streaming into goggles, but I can try, maybe.
I really wanna get those googles but it sucks if you cant use them for viewing pc content on them also. Is there no adapter to solve this?@@cosmostreamer4773
@@cosmostreamer4773 Hi, thanks for your work. I need your help, please. I tried to do this procedure, but something didn't work. I did all the procedure that is in your video; right after connecting the Googles cable to the computer, nothing happens. No image. I tried to change the device choice (client 1 or 0) it didn't work. I tested with several different cables and the same result. I get the camera image on Googles without any interference. Tested with Caddx and Air Unit, both were the same. I couldn't identify anything other than what you did for mine. Thanks again for your willingness. If you can help me I thank you in advance. Thanks.
how about dji goggles 2?
Hello! Thank you so much. Do you have any troubleshooting tips for direct connect? It connects but I don't get an image.
Usually it is because air unit overheating. Video stops after 1-2 minutes. Try to use fan to cool down air unit.
ALso try to enable debug mesasges option, it there some errors with no device found or something like that?
Hi! Thanks for the quick response!
I thought of that and grabbed a fresh quad off the table. Nice and cool. It also connect but no video.
Bebug says
Delta 1
Delta 0
A few delta 11 in the beginning.
Then mostly delta 0
Delta Delta delta!
delta is the time value from previuos packets. small delta values means connection is fine and video receiving is active. Try to enable or disable "Use HW decoder" in app settings, chapter "Video/Audio". Also maybe your graphics card is not compatible with gstreamer which used for video decoding and drawing in app.
@@cosmostreamer4773 I will give that a try. Thank you so much.
Thank you so mutch!
need same driver? thx
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
can i use goggles V1?
I tested in only with V1 Goggles
@@cosmostreamer4773 i plug in my goggles to laptop but nothing works. do i need to enable win usb driver?
will it works when i used av in? cause i running on analog module with my V1 goggles
@@agungwawI have no idea 🙂 need to test
me ayuda con su numero de whapp sapp para que me ayude con la configuracion en mi lapton o algun miembro que comentoi me ayude de urgencia
Telegram group t.me/cosmostreamer_group
Does not work on win11.
Does not give pop ups like in video to chose the connection and plugging the Goggle v2 does nothing. Does low power mode affect it?
Running it on my laptop with Win 11, no problem. What pop ups do you want to see? Click on the 3-rd icon from bottom in left panel, "Application settings". Then chapter "Cameras", select "DJI FPV Goggles in list".
Yes, you have to turn off Auto. Temp. Control in goggles.
genius!
Which driver usb i need
it is not working :( cutting in loop with popup detection screen
Maybe need to configure driver. Click big button "USB driver configuration", Zadig will be started. In device list choose the goggles and click "Reinstall"
does it work with dji integra googles?
Goggles2 or Integra can't be connected to PC directly, USB incompatibility. This device is needed cosmostreamer.com/products/djigoggles2/
why no support for linux , and i want to take the video output to opencv
A lot of instructions how to use goggles v1/v2 directly on Linux, just google it
@@cosmostreamer4773 i googled and tested yesterday but i could manage to do it
i have tested your software in windows it was amazing i got 70 to 85ms latency
but i want it on linux also for opencv test
can I screen my laptop desktop live to it ?
By default - no. But there is a FPV.WTF Hack that may be allow to do that. I did not thought about making the desktop streaming into goggles, but I can try, maybe.
I really wanna get those googles but it sucks if you cant use them for viewing pc content on them also. Is there no adapter to solve this?@@cosmostreamer4773
this way I can get the direct signal from the googles usb-c output; without having to connect with a raspberry?
yep, exactly
@@cosmostreamer4773 Hi, thanks for your work.
I need your help, please.
I tried to do this procedure, but something didn't work.
I did all the procedure that is in your video; right after connecting the Googles cable to the computer, nothing happens.
No image.
I tried to change the device choice (client 1 or 0) it didn't work.
I tested with several different cables and the same result.
I get the camera image on Googles without any interference.
Tested with Caddx and Air Unit, both were the same.
I couldn't identify anything other than what you did for mine.
Thanks again for your willingness.
If you can help me I thank you in advance.
Thanks.