Autocad Civil 3D - Box Culvert - Kutu Menfez
Вставка
- Опубліковано 5 вер 2024
- Create box culvert with assembly and its calculation.
Tip kesit ile kutu menfez çizimi ve hesaplarının yapılması.
Contact for assembly: civil3d.designer1@gmail.com
*Skewed box culvert is not drawn with box culvert assembly.
*Kutu Menfez tip kesiti ile verevli menfezler çizilememektedir.
OPERATIONAL STEPS
Objective: To draw and calculate a culvert project for an existing road.
*It should be noted that detailed projects for the culvert are required for precise calculations.
1. A water flow analysis will be conducted on the existing surface to determine the location for the culvert.
2. An approximate horizontal alignment and profile for the culvert will be drawn.
3. Assembly for the culvert will be created, and enter the planned project dimensions.
4. A corridor for the culvert body will be established.
5. Along the culvert alignment on the main road, a cross-section will be created.
Using this cross-section, the culvert body and wing sections will be marked, and these sections will be displayed along the culvert alignment.
6. The horizontal alignment and profile will be revised based on the culvert length.
7. To create the wing sections in the culvert corridor, the corridor will be divided into 3 parts, and assembly will be defined.
8. Excavation calculations for the slopeless culvert will be made (excavation surface will be established, cross-sections will be created, and volume calculations will be performed).
9. The culvert excavation will be converted into a sloped excavation.
10. The volume of concrete and grout for the culvert will be calculated.
11. A 3D Solid model will be created from the culvert assembly, and this model will be displayed along the profile of the main road.
Eline sağlık.Ustalık eserlerine başlamışız...👍
Her video yayınladıktan sonra güzel yorumunuzu sabırsızlıkla bekliyorum Hüseyin Bey :) Teşekkür ederim.
Elinize emeğinize sağlık
Teşekkür ederim Özcan Bey.
Excelente aporte. Podrías hacer un tutorial. Gracias
How to make sub assembly composer for wing wall box culvert? Please make a tutorial video.
Please contact with me by e-mail.
exelente amigo pero a las entradas y salidas de las estructura le hace falta el murete que es variable en altura lo cual se debería de poder editar o controlar
Hi Aquino. Are you talking about the piece of wall shown in that video?
ua-cam.com/video/er-zgl9plt4/v-deo.htmlsi=VYp79O8i2aS8He72
Oaaaau, that is awesom! well done!!!!
How did you managed to make wingwalls of the culvert? Did you make them in subasembly composer and what conndition did you apply?
Thanks for your comment, please contact with me by e-mail.
Eline sağlık
Teşekkür ederim Recep Bey
hocam videolarınızı beğenerek izliyorum acaba devamı gelecek mi
Teşekkür ederim Yılmaz Bey, fırsat buldukça video yayınlamaya çalışıyorum.
Sir where is full video
can you share with me how make culvert parts in subassembly composer
Please contact with me by e-mail.
Very nice
thank you for chanel.
Thanks for your comment Huỳnh.
Please make this video in english version. Thanks.
Gracias por el aporte, estoy interesado en conocer como es el .pkt. Me gustaría crear uno y no sé como hacerlo.
Un saludo
Thanks a lot. Please contact me by email.
yo tengo plugin para odt, si lo quieren me hablan, en mi perfil de youtube esta mi contacto
Menfez birden fazla gözlü oluyor mu hazırladığınız pkt dosyasında
Bu ptk tek gözlü, ama birden fazla göz eklenerek yeni bir ptk yapılabilir tabikide.
very nice
Thanks a lot😉 , how i can create this culvert ?
Hi, you can contact with my e-mail.
I need an English version of this please
Hello Justine, please contact with me by my email adress.
how i can create this culvert ?
Please contact with me by e-mail.
Menfez tipkesitini nasıl oluşturdunuz
Merhaba Merve Hanım, mail adresim ile iletişime geçebilirsiniz.
How can I get the assembly
Please contact with me by e-mail.
Me interesa estimado como lp obtengo.
Hello Matamoros, please contact with me by my email adress.
videodan ses gelmiyor hocam
Videoları ses olmadan oluşturuyorum Civan Bey, mümkün olduğunda anlaşılır çekmeye çalışıyorum ama takıldığınız yerleri buradan veya mail adresim üzerinden sorabilirsiniz. Mutlaka cevap vereceğim.
@@AutocadCivil3D hocam merhaba kolay gelsin hocam sizde menfezin ptk dosyasını bana göndereblirmisiniz
@@civangun1039 Mail üzerinden iletişime geçebilirsiniz Civan Bey.
very impressive.. can u share to me pkt file?
i already email to yo
Hello Marcgun, thanks for your comment. I reply to all mails sent to me, please check your mailing address.