ty my switch got wet and kept turning on so I took it apart and toweled it with what you showed, gave it a squeeze and now it no longer goes off on its own
Help. My hazard stopped working, even order a new hazard button. Fuses are ok. Turn signals are working normally so I think it’s not the Flasher relay or crash relay issue. I opened up the hazard button wiring as you did in video and test for voltage. The wire layout are grey/red, brown, blue, brown. It seems the brown wire between the grey/red and blue no longer have connections. When touch blue to the last brown wire I got live power. When touch the grey/red and last brown I also got live power. I Get no power when I test using the other brown to either blue or grey/red wire. Can someone please confirm that Touching either brown and either grey/red or blue should display live power? Also Any idea how or where to check why one of the brown wire is no longer connected? Would the brown be connected at the light or body frame?
Honestly, i'm not the electrical expert. In my opinion, i think you can try to change the flasher with another good flasher. Just to make sure if the initial flasher is still in good condition
ISSUE FIXED. You are correct, it was a bad flasher relay. The old flasher relay is only partial bad that's why the turn signals still work normally. Glad i was wrong to think the relay is still good just because the turn signal still works normally. I assume that bcuz the the turn signal and hazard use the same relay so both should not work if the relay is bad.
Setahu saya, tidak ada settingan di tuas perseneling standardnya, sudah bawaan dr sononya. Tetapi, untuk memendekkan jarak pergerakan tuas, biasanya tuas diganti dengan short shifter
Om.. punya saya switch nya itu kalau ditekan, balik lagi om.. jadi harus ditahan switch nya supaya hazard bisa menyala, kira2 switch itu bisa di repair ga om..
Yusuf Ucub mas Yusuf, kemarin sudah sy tanyain ke toko langganan, ternyata gak jual jg. Termasuk barang yg jarang nih kayaknya. Kalo boleh tahu bohlam bekas yg mas Yusuf masih ada atau sudah dibuang?
ty my switch got wet and kept turning on so I took it apart and toweled it with what you showed, gave it a squeeze and now it no longer goes off on its own
Excellent Video!
Help. My hazard stopped working, even order a new hazard button. Fuses are ok. Turn signals are working normally so I think it’s not the Flasher relay or crash relay issue.
I opened up the hazard button wiring as you did in video and test for voltage. The wire layout are grey/red, brown, blue, brown. It seems the brown wire between the grey/red and blue no longer have connections. When touch blue to the last brown wire I got live power. When touch the grey/red and last brown I also got live power. I Get no power when I test using the other brown to either blue or grey/red wire.
Can someone please confirm that Touching either brown and either grey/red or blue should display live power?
Also Any idea how or where to check why one of the brown wire is no longer connected? Would the brown be connected at the light or body frame?
Honestly, i'm not the electrical expert. In my opinion, i think you can try to change the flasher with another good flasher. Just to make sure if the initial flasher is still in good condition
ISSUE FIXED. You are correct, it was a bad flasher relay. The old flasher relay is only partial bad that's why the turn signals still work normally. Glad i was wrong to think the relay is still good just because the turn signal still works normally. I assume that bcuz the the turn signal and hazard use the same relay so both should not work if the relay is bad.
What if it's an automatic how do I remove it
I have no idea, sorry
is this a t5 bulb?
I don't know the bulb specification
@@motoren_works Do you have the part number?
@@TreverMcDermott the hazard warning switch 1374220
Yes is a t5
Or maybe t3
Mas kalo seting tuas persneling nya biar agak deket jarak antar gigi nya gmn ya ?
Kayak nya bawaan e36 agak jauhan gitu tiap pindah gigi nya.
Setahu saya, tidak ada settingan di tuas perseneling standardnya, sudah bawaan dr sononya.
Tetapi, untuk memendekkan jarak pergerakan tuas, biasanya tuas diganti dengan short shifter
@@motoren_works oh gitu siap makasih mas
@@ardiandro7371 siyap
Om.. punya saya switch nya itu kalau ditekan, balik lagi om.. jadi harus ditahan switch nya supaya hazard bisa menyala, kira2 switch itu bisa di repair ga om..
Sy tidak bisa ngasih jawaban om, karena belum pernah punya pengalaman bongkar
Om bohlam nya itu beli dimana ya? Soalnyakan nyatu sama dudukan nya
Yusuf Ucub di daerah sini sy belum coba nanya ke toko langganan sih. Kalo di jakarta, mas Yusuf coba nanya ke berdikari atau istana motor.
motoren works waktu itu sy bongkar di berdikari kemayoran eh barang nya gak ada😣
Yusuf Ucub Ealah... stok barang kecil model gini sepertinya jarang ya mas
Yusuf Ucub mas Yusuf, kemarin sudah sy tanyain ke toko langganan, ternyata gak jual jg. Termasuk barang yg jarang nih kayaknya. Kalo boleh tahu bohlam bekas yg mas Yusuf masih ada atau sudah dibuang?
motoren works masih ada tapi copot dari mangkok nya om