+1 chandru shekhar. i was about to comment the same. I would prefer if my bike is not worked upon out in the open where fresh/replacement oil/grease is likely to get contaminated during re-install.
Some time it happen bcs of road conditions also and for low tyre pressure also and some time if your bikes cone set is littl eaxtra tights . So check all this steep by step and you'll figure out problem
Brw im not getting proper suspension play what shud i do and which is the best fork oil for Himalayan. They asked me to change the roll visor or something what do you suggest
Oil occurs naturally in Canada on the surface of the soil, but we harvest it. 20W seems heavy for regular forks?? I haven't seen someone using diesel in a while for cleaning out the injectors :-)))
Very good content you have. I must say a lot of substance.And the fact you are not presumptuous, also is very admirable. Do a lot more technical videos, and do vlog your rides. Looking forward to even more great content from you. Keep it up and Godspeed.
@Hemant Hey I have a classic 350 and I feel it has got some problem with front suspension it makes some tik tik noise all the time and also does not absorb the shock properly..I have visited so many mechanics in Mumbai but still the problem persists..can you help resolving this? Please
RUDY THERIDER bro get some good brand engine flush and use it . It vll not damage anything just don't ride your bike while flushing process and don't rave it hard
If a has is produced by the fork oil, it's got to be due to the oil breaking down over time. When sufficient oil had broken down, the volume of oil is reduced. Gas is compressible and oil is not. That can explain softness of the fork. The other reason is oil leaking out.
Explaining is all upto standards ,but what Kind of shit you did is really bad . Have some sense dude it's a chemical . The way you dispose it you should be careful . What a basic human being needs to think is "how should I dispose it ? " . Not have a amazing video explain things and have all the knowledge in the world without have a basic manners . Atleast keep things environment clean . It's already f**ked up too much . Sad that you show people things like this and they start doing 😶
HDT Customs . I have a new bike (180kms done till date). Today while I was riding between 70-80kmph and momentarily removed both hands from the handle to check stability. I felt the bike to be pulling to one particular side. Is this normal?
Hemant Bhai Meri Honda stunner hai mai jab bike chalata huuu tab muje handling achhi nahi mil rahi hai jab left ya right turn lene jata hu tabhi bike one side jis side handle ghumaungaa us side Jada balance jata hai aisa fil hota hai ki mai turn marte samay handle balance nahi hone k vajese girl jaunga aur barish k time to chalane mai dar lagta hai Maine 2 baar fork out nikala hai handle new dala hai phir bhi chalate samay bike ka handle cross hi lagta hai aur bike running mai hoti hai to Tyre bhi jump kar raha hai aisa Phil hota hai plz help me hemant Bhai.........
Por todos lados haciendo brutalidades, sin desarmar por completo como se le ocurre lavar con gasolina? Dañando los componentes internos que no son metálicos y lo peor, como se le ocurre tirar el aceite al suelo??? Hasta ahí vi el vídeo y no quise ver qué más había!
hemant you have won my heart.... absolutely amazing job done by you..... excellent knowledge......
nice video, good guidance for DIY persons,very good information,good work,
but
KEEP INDIA CLEAN
DISPOSE OIL PROPERLY
+1 chandru shekhar. i was about to comment the same. I would prefer if my bike is not worked upon out in the open where fresh/replacement oil/grease is likely to get contaminated during re-install.
Excellent videos and information, but can you do in english? you will have greater audience for your channel too. Cheers from Netherlands/Holland.
great work pal, thanks for upload
Good video bro.. My bike completed 26000 km and at SC nobody give a damm to these steps..
Yes I know that bro
zabardast knowledge and explanation.. i would like to visit you bhai whr do u stay and upgrade ur bike.. I hope Mumbai me hi ho aap.. please reply
Amazing video broo... Contains lot of info in ur vid.....
Not amazing, pooring oil on the floor. Don't like...
hemant bhai rubber part diesel se kharab hota hai? i thought petrol se hota hai?
Some time it happen bcs of road conditions also and for low tyre pressure also and some time if your bikes cone set is littl eaxtra tights . So check all this steep by step and you'll figure out problem
Hi sir, can i fit himalayan forks in another bike, please suggest? Thanks.
Can i use this suspnsions in other bikes..??? And plz price bhi btao
Bhai how can we improve suspension of thunderbird? Can we put Himalayan suspension in thunderbird?
Can we use himalyan fork gaiter in bullet electra ?
Bhai How much fork oil is required for old Dominar
Brw im not getting proper suspension play what shud i do and which is the best fork oil for Himalayan. They asked me to change the roll visor or something what do you suggest
Oil occurs naturally in Canada on the surface of the soil, but we harvest it.
20W seems heavy for regular forks??
I haven't seen someone using diesel in a while for cleaning out the injectors :-)))
Very good content you have. I must say a lot of substance.And the fact you are not presumptuous, also is very admirable.
Do a lot more technical videos, and do vlog your rides. Looking forward to even more great content from you. Keep it up and Godspeed.
Prabhjot Vir Singh thanx a lot brother . I'll definitely put my ride videos very soon .
@Hemant Hey I have a classic 350 and I feel it has got some problem with front suspension it makes some tik tik noise all the time and also does not absorb the shock properly..I have visited so many mechanics in Mumbai but still the problem persists..can you help resolving this? Please
Why don't you are in delhi sir
Kalkutta..... Ölwechsel am Straßenrand , läuft!!!😉
Hement engine flush is good for himalaya can i use for my bike i am bit confuse on this i fixed my bike my own just need a extra suggestion
RUDY THERIDER bro get some good brand engine flush and use it . It vll not damage anything just don't ride your bike while flushing process and don't rave it hard
Impact wrench will be useful for loosening the fork nut at the top.
Himalayan abs switch on off mod ka video banawo .....
If a has is produced by the fork oil, it's got to be due to the oil breaking down over time. When sufficient oil had broken down, the volume of oil is reduced. Gas is compressible and oil is not. That can explain softness of the fork. The other reason is oil leaking out.
Hemanth bhaii idling set karne ka video karo bs4 fi model ka Mera service center se lafda hogaya hai
Pour dirty fork oil directly into the dirt. Lovely.
Now I have my own geraj so now I put it in waist oil gallon . Learning from mistakes . Thanx for correcting me
Vai USD fork ka koiy set -up banao.. Himalayan ke kiye???
Bro mera Himalayan ka front suspension awaj karta hai, iska kya solutions ho sakta hai ? Please help
How much it coat
Is it possible to lower the front suspension travel height??
Yes possible . You'll need to loos bolts of Tstam and let it go down as much as I want and lock it up
Superb👍
thank you again bhai
Explaining is all upto standards ,but what Kind of shit you did is really bad . Have some sense dude it's a chemical . The way you dispose it you should be careful . What a basic human being needs to think is "how should I dispose it ? " . Not have a amazing video explain things and have all the knowledge in the world without have a basic manners . Atleast keep things environment clean . It's already f**ked up too much . Sad that you show people things like this and they start doing 😶
I appreciate ur concern regarding environment
You may have stiffen the suspension after putting 20W fork oil instead of RE Himalayan manual saying to use 5W fork oil
Bike kheechti hain MATLAB? Does the bike pull towards one side? How to identify?
Rohan Rayakar yes it vll pull on any of the sides right or left
HDT Customs . I have a new bike (180kms done till date). Today while I was riding between 70-80kmph and momentarily removed both hands from the handle to check stability. I felt the bike to be pulling to one particular side. Is this normal?
Hemant Bhai Meri Honda stunner hai mai jab bike chalata huuu tab muje handling achhi nahi mil rahi hai jab left ya right turn lene jata hu tabhi bike one side jis side handle ghumaungaa us side Jada balance jata hai aisa fil hota hai ki mai turn marte samay handle balance nahi hone k vajese girl jaunga aur barish k time to chalane mai dar lagta hai Maine 2 baar fork out nikala hai handle new dala hai phir bhi chalate samay bike ka handle cross hi lagta hai aur bike running mai hoti hai to Tyre bhi jump kar raha hai aisa Phil hota hai plz help me hemant Bhai.........
oil name please
Por todos lados haciendo brutalidades, sin desarmar por completo como se le ocurre lavar con gasolina? Dañando los componentes internos que no son metálicos y lo peor, como se le ocurre tirar el aceite al suelo??? Hasta ahí vi el vídeo y no quise ver qué más había!
Nice to see a 🍺 beer bottle
wiser nai washer
Throwing oil in soil is not ecosafe and advisable
Scooter k lia kya guide line hay sir....
Biplab Garai which scooter bro
Ur not disposing old oil as per norms ..
Unbeliavable indeed.
Bhai 450ml per fork hai na
nitin verma ha Bhai 455 ml
HDT Customs thanks bhai really helpful videos
I like your rear view mirror. Advice brand and price and bying location or link
Not cool bro, dispose of oil properly.