How to Replace Parking Brake Shoe Set 2008-2013 Nissan Rogue

Поділитися
Вставка
  • Опубліковано 11 тра 2023
  • Buy Now!
    New Parking Brake Shoe Set from 1AAuto.com 1aau.to/id/1ABPS03842
    This video shows you how to install a parking brake shoe set on your 2008-2013 Nissan Rogue. For drum brakes and parking brakes, shoes will eventually need to be replaced.
    This process should be similar on the following vehicles:
    2008 Nissan Rogue
    2009 Nissan Rogue
    2010 Nissan Rogue
    2011 Nissan Rogue
    2012 Nissan Rogue
    2013 Nissan Rogue
    Tools you will need:
    • Pry Bar 1aau.to/oRv/1AXAA00020
    • 17mm Wrench 1aau.to/oT6/1AXAA00010
    • 14mm Socket 1aau.to/oboI/1AXAA00015
    • 21mm Socket 1aau.to/oadA/1AXAA00043
    • Brake Caliper Hanger 1aau.to/oia/1AXAA00439
    • Needle nose pliers 1aau.to/oCi/1AXAA00051
    • Needle nose pliers 1aau.to/oCi/1AXAA00052
    • Ratchet 1aau.to/obwv/1AXAA00016
    • Torque Wrench 1aau.to/oaAb/1AXAA00044
    • Brake Grease
    • Brake Parts Cleaner
    • Copper Anti-Seize
    • Gloves 1aau.to/oXb/1AXSS00048
    • Safety Glasses 1aau.to/oQm/1AXAA00343
    • Floor Jack 1aau.to/oZ2/1AXAA00068
    • Wheel Chocks
    • Wire Brush 1aau.to/osg/1AXAA00079
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 8

  • @TRQ
    @TRQ  Рік тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @luthervg
    @luthervg Рік тому

    Thank you for the great descriptive, step by step procedure. I had to replace my rear hub and when I did I noticed the parking brake hardware needed replacing too. I have always hated replacing the parking brake on anything but this video helped me out immensely getting it all put back together properly. Thank you so much.

    • @TRQ
      @TRQ  Рік тому

      +Ocooch Hick Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

  • @Bassboxv50
    @Bassboxv50 Місяць тому

    Great detailed video, but may I ask on the 6 contact points that you clean and then grease up, what kind of grease do you use? Is copper grease ok to use here?

  • @Wayne-jp7wk
    @Wayne-jp7wk Місяць тому

    Is there no parking brake adjuster in this?

  • @YanDaOne_QC
    @YanDaOne_QC Рік тому

    my rotors just wont go back there...... i don't know what's going on

  • @keifergray9265
    @keifergray9265 9 місяців тому

    where can you buy that kind of flat head ?

    • @TRQ
      @TRQ  9 місяців тому

      +Keifer Gray You should be able to find this at any local auto parts store.