How to Change Temp To Celsius for PeakCold Products - Dixell Controller
Вставка
- Опубліковано 22 сер 2024
- Iron Mountain Refrigeration and Equipment, LLC
10550 86th Ave Ste 101
Pleasant Prairie, WI 53158
phone: 833-734-8880
email: cs@imref1.com
www.ironmountainrefrigeration.com
The Dixell Controller is used in all PEAK COLD Refrigeration sold only by Iron Mountain Refrigeration and Equipment including Upright Display Coolers, Back Bar Coolers, Commercial Refrigerators and Freezers, Island Freezers, Refrigerated Prep Tables, Deli Cases and Cake Display Cases.
This video will explain how to change your temperature to celsius on your Dixell Controller.
Steps:
1. To begin press and hold the SET and DOWN ARROW until the controller displays HY. Release.
2. Press and hold the SET and DOWN ARROW again until the controller displays L2. It will flash and change to H-DOT-Y.
3. Press the UP BUTTON to CF. Press SET. Press DOWN to C. Press SET.
4. Press DOWN to HY. Press SET.
5. Adjust to 4. Press SET.
6. It will flash and go to LS. Press SET.
7. Adjust to desired lower set point. Press SET.
8. It will flash and go to US. Press SET.
9. Adjust upper set point to 4 degrees above lower set point.
10. Press SET and wait for the controller to display a temperature again. Then press and hold the SET button until the C flashes. Release.
11. Change the temperature to your desired lower set point temperature. Press SET.
Your changes have now been saved.