Sir how can I eliminate "Power Failure"? When there is power failure alarm although display is available the counter stopped counting measurement is not possible. For now, I have to reset the power supply every time we have fuel loading then it starts counting.
Power Failure is only an Information Alarm that power has been turned off and powered on. Ideally you can eliminate this via quick setup - reset alarms
@@teamobiasvlogs495 Actually there are three alarms I observed "out of specification", "system control" and "power failure". When I reset though quick set up only the power failure alarm disappear out of specification and system control still exist. When system control is ACTIVE mass flow is not measured. I checked the process control settings everything is good. What could be the problem of the Flow meter Sir? TIA
Nice Sir, i like your video tutorial very informative
Good day sir how to factory reset the ufc 030 krohne flow meter
Thank you for the video and talking in English
my krohne optiflux 4300 displays 0.0m3/h whiles product is passing through, please what could be the issue?
Thanks
Sir how can I eliminate "Power Failure"? When there is power failure alarm although display is available the counter stopped counting measurement is not possible. For now, I have to reset the power supply every time we have fuel loading then it starts counting.
Power Failure is only an Information Alarm that power has been turned off and powered on. Ideally you can eliminate this via quick setup - reset alarms
@@teamobiasvlogs495 Maraming Salamat Sir.
@@teamobiasvlogs495 Actually there are three alarms I observed "out of specification", "system control" and "power failure". When I reset though quick set up only the power failure alarm disappear out of specification and system control still exist. When system control is ACTIVE mass flow is not measured. I checked the process control settings everything is good. What could be the problem of the Flow meter Sir? TIA
We are facing error Like ; unreliable reading and second channel path error. what could be the reason. what is to be done.
check the actual values. actual gain and actial SNR. If the SnR is very low maybe its a noisy application.
@@teamobiasvlogs495 hello please how I can convert m3 to MMSCFD from this device Flow meter
What is the password for optimass 2300c c150 model?
because? flow values change inaccurately with no flow in the pipe
👍
It is showing 247 error. Not communicating